/brz/remove-bazaar

# Copyright (C) 2005 Canonical Ltd

#

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 2 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program; if not, write to the Free Software

# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

# XXX: Can we do any better about making interrupted commits change

# nothing?  Perhaps the best approach is to integrate commit of

# AtomicFiles with releasing the lock on the Branch.

# TODO: Separate 'prepare' phase where we find a list of potentially

# committed files.  We then can then pause the commit to prompt for a

# commit message, knowing the summary will be the same as what's

# actually used for the commit.  (But perhaps simpler to simply get

# the tree status, then use that for a selective commit?)

# The newly committed revision is going to have a shape corresponding

# to that of the working inventory.  Files that are not in the

# working tree and that were in the predecessor are reported as

# removed --- this can include files that were either removed from the

# inventory or deleted in the working tree.  If they were only

# deleted from disk, they are removed from the working inventory.

# We then consider the remaining entries, which will be in the new

# version.  Directory entries are simply copied across.  File entries

# must be checked to see if a new version of the file should be

# recorded.  For each parent revision inventory, we check to see what

# version of the file was present.  If the file was present in at

# least one tree, and if it was the same version in all the trees,

# then we can just refer to that version.  Otherwise, a new version

# representing the merger of the file versions must be added.

# TODO: Update hashcache before and after - or does the WorkingTree

# look after that?

# TODO: Rather than mashing together the ancestry and storing it back,

# perhaps the weave should have single method which does it all in one

# go, avoiding a lot of redundant work.

# TODO: Perhaps give a warning if one of the revisions marked as

# merged is already in the ancestry, and then don't record it as a

# distinct parent.

# TODO: If the file is newly merged but unchanged from the version it

# merges from, then it should still be reported as newly added

# relative to the basis revision.

# TODO: Do checks that the tree can be committed *before* running the 

# editor; this should include checks for a pointless commit and for 

# unknown or missing files.

# TODO: If commit fails, leave the message in a file somewhere.

import os

import re

import sys

import time

import pdb

from binascii import hexlify

from cStringIO import StringIO

from bzrlib.atomicfile import AtomicFile

from bzrlib.osutils import (local_time_offset,

                            rand_bytes, compact_date,

                            kind_marker, is_inside_any, quotefn,

                            sha_string, sha_strings, sha_file, isdir, isfile,

                            split_lines)

import bzrlib.config

import bzrlib.errors as errors

from bzrlib.errors import (BzrError, PointlessCommit,

                           HistoryMissing,

                           ConflictsInTree,

                           StrictCommitFailed

                           )

import bzrlib.gpg as gpg

from bzrlib.revision import Revision

from bzrlib.testament import Testament

from bzrlib.trace import mutter, note, warning

from bzrlib.xml5 import serializer_v5

from bzrlib.inventory import Inventory, ROOT_ID

from bzrlib.symbol_versioning import *

from bzrlib.weave import Weave

from bzrlib.weavefile import read_weave, write_weave_v5

from bzrlib.workingtree import WorkingTree

@deprecated_function(zero_seven)

def commit(*args, **kwargs):

    """Commit a new revision to a branch.

    Function-style interface for convenience of old callers.

    New code should use the Commit class instead.

    """

    ## XXX: Remove this in favor of Branch.commit?

    Commit().commit(*args, **kwargs)

class NullCommitReporter(object):

    """I report on progress of a commit."""

    def snapshot_change(self, change, path):

        pass

    def completed(self, revno, rev_id):

        pass

    def deleted(self, file_id):

        pass

    def escaped(self, escape_count, message):

        pass

    def missing(self, path):

        pass

class ReportCommitToLog(NullCommitReporter):

    def snapshot_change(self, change, path):

        note("%s %s", change, path)

    def completed(self, revno, rev_id):

        note('committed r%d {%s}', revno, rev_id)

    def deleted(self, file_id):

        note('deleted %s', file_id)

    def escaped(self, escape_count, message):

        note("replaced %d control characters in message", escape_count)

    def missing(self, path):

        note('missing %s', path)

class Commit(object):

    """Task of committing a new revision.

    This is a MethodObject: it accumulates state as the commit is

    prepared, and then it is discarded.  It doesn't represent

    historical revisions, just the act of recording a new one.

            missing_ids

            Modified to hold a list of files that have been deleted from

            the working directory; these should be removed from the

            working inventory.

    """

    def __init__(self,

                 reporter=None,

                 config=None):

        if reporter is not None:

            self.reporter = reporter

        else:

            self.reporter = NullCommitReporter()

        if config is not None:

            self.config = config

        else:

            self.config = None

    def commit(self,

               branch=DEPRECATED_PARAMETER, message=None,

               timestamp=None,

               timezone=None,

               committer=None,

               specific_files=None,

               rev_id=None,

               allow_pointless=True,

               strict=False,

               verbose=False,

               revprops=None,

               working_tree=None):

        """Commit working copy as a new revision.

        branch -- the deprecated branch to commit to. New callers should pass in 

                  working_tree instead

        message -- the commit message, a mandatory parameter

        timestamp -- if not None, seconds-since-epoch for a

             postdated/predated commit.

        specific_files -- If true, commit only those files.

        rev_id -- If set, use this as the new revision id.

            Useful for test or import commands that need to tightly

            control what revisions are assigned.  If you duplicate

            a revision id that exists elsewhere it is your own fault.

            If null (default), a time/random revision id is generated.

        allow_pointless -- If true (default), commit even if nothing

            has changed and no merges are recorded.

        strict -- If true, don't allow a commit if the working tree

            contains unknown files.

        revprops -- Properties for new revision

        """

        mutter('preparing to commit')

        if deprecated_passed(branch):

            warn("Commit.commit (branch, ...): The branch parameter is "

                 "deprecated as of bzr 0.8. Please use working_tree= instead.",

                 DeprecationWarning, stacklevel=2)

            self.branch = branch

            self.work_tree = self.branch.bzrdir.open_workingtree()

        elif working_tree is None:

            raise BzrError("One of branch and working_tree must be passed into commit().")

        else:

            self.work_tree = working_tree

            self.branch = self.work_tree.branch

        if message is None:

            raise BzrError("The message keyword parameter is required for commit().")

        self.weave_store = self.branch.repository.weave_store

        self.rev_id = rev_id

        self.specific_files = specific_files

        self.allow_pointless = allow_pointless

        self.revprops = {'branch-nick': self.branch.nick}

        if revprops:

            self.revprops.update(revprops)

        # check for out of date working trees

        if self.work_tree.last_revision() != self.branch.last_revision():

            raise errors.OutOfDateTree(self.work_tree)

        if strict:

            # raise an exception as soon as we find a single unknown.

            for unknown in self.work_tree.unknowns():

                raise StrictCommitFailed()

        if timestamp is None:

            self.timestamp = time.time()

        else:

            self.timestamp = long(timestamp)

        if self.config is None:

            self.config = bzrlib.config.BranchConfig(self.branch)

        if rev_id is None:

            self.rev_id = _gen_revision_id(self.config, self.timestamp)

        else:

            self.rev_id = rev_id

        if committer is None:

            self.committer = self.config.username()

        else:

            assert isinstance(committer, basestring), type(committer)

            self.committer = committer

        if timezone is None:

            self.timezone = local_time_offset()

        else:

            self.timezone = int(timezone)

        if isinstance(message, str):

            message = message.decode(bzrlib.user_encoding)

        assert isinstance(message, unicode), type(message)

        self.message = message

        self._escape_commit_message()

        self.branch.lock_write()

        try:

            self.work_inv = self.work_tree.inventory

            self.basis_tree = self.work_tree.basis_tree()

            self.basis_inv = self.basis_tree.inventory

            self._gather_parents()

            if len(self.parents) > 1 and self.specific_files:

                raise NotImplementedError('selected-file commit of merges is not supported yet')

            self._check_parents_present()

            self._remove_deleted()

            self._populate_new_inv()

            self._store_snapshot()

            self._report_deletes()

            if not (self.allow_pointless

                    or len(self.parents) > 1

                    or self.new_inv != self.basis_inv):

                raise PointlessCommit()

            if len(list(self.work_tree.iter_conflicts()))>0:

                raise ConflictsInTree

            self._record_inventory()

            self._make_revision()

            self.work_tree.set_pending_merges([])

            self.branch.append_revision(self.rev_id)

            if len(self.parents):

                precursor = self.parents[0]

            else:

                precursor = None

            self.work_tree.set_last_revision(self.rev_id, precursor)

            self.reporter.completed(self.branch.revno()+1, self.rev_id)

            if self.config.post_commit() is not None:

                hooks = self.config.post_commit().split(' ')

                # this would be nicer with twisted.python.reflect.namedAny

                for hook in hooks:

                    result = eval(hook + '(branch, rev_id)',

                                  {'branch':self.branch,

                                   'bzrlib':bzrlib,

                                   'rev_id':self.rev_id})

        finally:

            self.branch.unlock()

    def _record_inventory(self):

        """Store the inventory for the new revision."""

        inv_text = serializer_v5.write_inventory_to_string(self.new_inv)

        self.inv_sha1 = sha_string(inv_text)

        s = self.branch.repository.control_weaves

        s.add_text('inventory', self.rev_id,

                   split_lines(inv_text), self.present_parents,

                   self.branch.get_transaction())

    def _escape_commit_message(self):

        """Replace xml-incompatible control characters."""

        # Python strings can include characters that can't be

        # represented in well-formed XML; escape characters that

        # aren't listed in the XML specification

        # (http://www.w3.org/TR/REC-xml/#NT-Char).

        self.message, escape_count = re.subn(

            u'[^\x09\x0A\x0D\u0020-\uD7FF\uE000-\uFFFD]+',

            lambda match: match.group(0).encode('unicode_escape'),

            self.message)

        if escape_count:

            self.reporter.escaped(escape_count, self.message)

    def _gather_parents(self):

        """Record the parents of a merge for merge detection."""

        pending_merges = self.work_tree.pending_merges()

        self.parents = []

        self.parent_invs = []

        self.present_parents = []

        precursor_id = self.branch.last_revision()

        if precursor_id:

            self.parents.append(precursor_id)

        self.parents += pending_merges

        for revision in self.parents:

            if self.branch.repository.has_revision(revision):

                inventory = self.branch.repository.get_inventory(revision)

                self.parent_invs.append(inventory)

                self.present_parents.append(revision)

    def _check_parents_present(self):

        for parent_id in self.parents:

            mutter('commit parent revision {%s}', parent_id)

            if not self.branch.repository.has_revision(parent_id):

                if parent_id == self.branch.last_revision():

                    warning("parent is missing %r", parent_id)

                    raise HistoryMissing(self.branch, 'revision', parent_id)

                else:

                    mutter("commit will ghost revision %r", parent_id)

    def _make_revision(self):

        """Record a new revision object for this commit."""

        self.rev = Revision(timestamp=self.timestamp,

                            timezone=self.timezone,

                            committer=self.committer,

                            message=self.message,

                            inventory_sha1=self.inv_sha1,

                            revision_id=self.rev_id,

                            properties=self.revprops)

        self.rev.parent_ids = self.parents

        rev_tmp = StringIO()

        serializer_v5.write_revision(self.rev, rev_tmp)

        rev_tmp.seek(0)

        if self.config.signature_needed():

            plaintext = Testament(self.rev, self.new_inv).as_short_text()

            self.branch.repository.store_revision_signature(

                gpg.GPGStrategy(self.config), plaintext, self.rev_id)

        self.branch.repository.revision_store.add(rev_tmp, self.rev_id)

        mutter('new revision_id is {%s}', self.rev_id)

    def _remove_deleted(self):

        """Remove deleted files from the working inventories.

        This is done prior to taking the working inventory as the

        basis for the new committed inventory.

        This returns true if any files

        *that existed in the basis inventory* were deleted.

        Files that were added and deleted

        in the working copy don't matter.

        """

        specific = self.specific_files

        deleted_ids = []

        for path, ie in self.work_inv.iter_entries():

            if specific and not is_inside_any(specific, path):

                continue

            if not self.work_tree.has_filename(path):

                self.reporter.missing(path)

                deleted_ids.append((path, ie.file_id))

        if deleted_ids:

            deleted_ids.sort(reverse=True)

            for path, file_id in deleted_ids:

                del self.work_inv[file_id]

            self.work_tree._write_inventory(self.work_inv)

    def _store_snapshot(self):

        """Pass over inventory and record a snapshot.

        Entries get a new revision when they are modified in 

        any way, which includes a merge with a new set of

        parents that have the same entry. 

        """

        # XXX: Need to think more here about when the user has

        # made a specific decision on a particular value -- c.f.

        # mark-merge.  

        for path, ie in self.new_inv.iter_entries():

            previous_entries = ie.find_previous_heads(

                self.parent_invs, 

                self.weave_store.get_weave_prelude_or_empty(ie.file_id,

                    self.branch.get_transaction()))

            if ie.revision is None:

                change = ie.snapshot(self.rev_id, path, previous_entries,

                                     self.work_tree, self.weave_store,

                                     self.branch.get_transaction())

            else:

                change = "unchanged"

            self.reporter.snapshot_change(change, path)

    def _populate_new_inv(self):

        """Build revision inventory.

        This creates a new empty inventory. Depending on

        which files are selected for commit, and what is present in the

        current tree, the new inventory is populated. inventory entries 

        which are candidates for modification have their revision set to

        None; inventory entries that are carried over untouched have their

        revision set to their prior value.

        """

        mutter("Selecting files for commit with filter %s", self.specific_files)

        self.new_inv = Inventory()

        for path, new_ie in self.work_inv.iter_entries():

            file_id = new_ie.file_id

            mutter('check %s {%s}', path, new_ie.file_id)

            if self.specific_files:

                if not is_inside_any(self.specific_files, path):

                    mutter('%s not selected for commit', path)

                    self._carry_entry(file_id)

                    continue

                else:

                    # this is selected, ensure its parents are too.

                    parent_id = new_ie.parent_id

                    while parent_id != ROOT_ID:

                        if not self.new_inv.has_id(parent_id):

                            ie = self._select_entry(self.work_inv[parent_id])

                            mutter('%s selected for commit because of %s',

                                   self.new_inv.id2path(parent_id), path)

                        ie = self.new_inv[parent_id]

                        if ie.revision is not None:

                            ie.revision = None

                            mutter('%s selected for commit because of %s',

                                   self.new_inv.id2path(parent_id), path)

                        parent_id = ie.parent_id

            mutter('%s selected for commit', path)

            self._select_entry(new_ie)

    def _select_entry(self, new_ie):

        """Make new_ie be considered for committing."""

        ie = new_ie.copy()

        ie.revision = None

        self.new_inv.add(ie)

        return ie

    def _carry_entry(self, file_id):

        """Carry the file unchanged from the basis revision."""

        if self.basis_inv.has_id(file_id):

            self.new_inv.add(self.basis_inv[file_id].copy())

    def _report_deletes(self):

        for file_id in self.basis_inv:

            if file_id not in self.new_inv:

                self.reporter.deleted(self.basis_inv.id2path(file_id))

def _gen_revision_id(config, when):

    """Return new revision-id."""

    s = '%s-%s-' % (config.user_email(), compact_date(when))

    s += hexlify(rand_bytes(8))

    return s