/brz/remove-bazaar

IN DEVELOPMENT

  IMPROVEMENTS:

    * ``bzr help commands`` output is now shorter (Aaron Bentley)

    * New connection: ``bzr+http://`` which supports tunnelling the smart

      protocol over an HTTP connection. If writing is enabled on the bzr

      server, then you can write over the http connection.

      (Andrew Bennetts)

    * ``bzr`` now uses lazy importing to reduce the startup time. This has

      a moderate effect on lots of actions, especially ones that have

      little to do. For example ``bzr rocks`` time is down to 116ms from

      283ms. (John Arbash Meinel)

    * New Registry class to provide name-to-object registry-like support,

      for example for schemes where plugins can register new classes to

      do certain tasks (e.g. log formatters). Also provides lazy registration

      to allow modules to be loaded on request. (John Arbash Meinel, Adeodato

      Simó)

  INTERNALS:

    * ``TestCase.run_bzr``, ``run_bzr_captured``, and ``run_bzr_subprocess``

      can take a ``working_dir='foo'`` parameter, which will change directory 

      for the command. (John Arbash Meinel)

    * ``bzrlib.lazy_regex.lazy_compile`` can be used to create a proxy

      around a regex, which defers compilation until first use. 

      (John Arbash Meinel)

    * ``TestCase.run_bzr_subprocess`` defaults to supplying the

      ``--no-plugins`` parameter to ensure test reproducability, and avoid

      problems with system-wide installed plugins. (John Arbash Meinel)

    * Newly-initialized trees have unique root ids.  (Aaron Bentley)

  BUG FIXES:

    * Don't require ``Content-Type`` in range responses. Assume they are a

      single range if ``Content-Type`` does not exist.

      (John Arbash Meinel, #62473)

    * bzr branch/pull no longer complain about progress bar cleanup when

      interrupted during fetch.  (Aaron Bentley, #54000)

    * ``WorkingTree.set_parent_trees()`` uses the trees to directly write

      the basis inventory, rather than going through the repository. This

      allows us to have 1 inventory read, and 2 inventory writes when

      committing a new tree. (John Arbash Meinel)

    * When reverting, files that are not locally modified that do not exist

      in the target are deleted, not just unversioned (Aaron Bentley)

    * When trying to acquire a lock, don't fail immediately. Instead, try

      a few times (up to 1 hour) before timing out. Also, report why the

      lock is unavailable (John Arbash Meinel, #43521, #49556)

    * Leave HttpTransportBase daughter classes decides how they

      implement cloning. (Vincent Ladeuil, #61606)

   * diff3 does not indicate conflicts on clean merge. (Aaron Bentley)

  TESTING:

    * New test base class TestCaseWithMemoryTransport offers memory-only

      testing facilities: its not suitable for tests that need to mutate disk

      state, but most tests should not need that and should be converted to

      TestCaseWithMemoryTransport. (Robert Collins)

    * ``TestCase.make_branch_and_memory_tree`` now takes a format

      option to set the BzrDir, Repository and Branch formats of the

      created objects. (Robert Collins, John Arbash Meinel)

bzr 0.11  2006-10-02

    * Smart server transport test failures on windows fixed. (Lukáš Lalinský).

bzr 0.11rc2  2006-09-27

  BUG FIXES:

    * Test suite hangs on windows fixed. (Andrew Bennets, Alexander Belchenko).

    * Commit performance regression fixed. (Aaron Bentley, Robert Collins, John

      Arbash Meinel).

bzr 0.11rc1  2006-09-25

  IMPROVEMENTS:

    * Knit files now wait to create their contents until the first data is

      added. The old code used to create an empty .knit and a .kndx with just

      the header. However, this caused a lot of extra round trips over sftp.

      This can change the time for ``bzr push`` to create a new remote branch

      from 160s down to 100s. This also affects ``bzr commit`` performance when

      adding new files, ``bzr commit`` on a new kernel-like tree drops from 50s

      down to 40s (John Arbash Meinel, #44692)

    * When an entire subtree has been deleted, commit will now report that

      just the top of the subtree has been deleted, rather than reporting

      all the individual items. (Robert Collins)

    * Commit performs one less XML parse. (Robert Collins)

    * ``bzr checkout`` now operates on readonly branches as well

      as readwrite branches. This fixes bug #39542. (Robert Collins)

    * ``bzr bind`` no longer synchronises history with the master branch.

      Binding should be followed by an update or push to synchronise the 

      two branches. This is closely related to the fix for bug #39542.

      (Robert Collins)

    * ``bzrlib.lazy_import.lazy_import`` function to create on-demand 

      objects.  This allows all imports to stay at the global scope, but

      modules will not actually be imported if they are not used.

      (John Arbash Meinel)

    * Support bzr:// and bzr+ssh:// urls to work with the new RPC-based

      transport which will be used with the upcoming high-performance smart

      server. The new command ``bzr serve`` will invoke bzr in server mode,

      which processes these requests. (Andrew Bennetts, Robert Collins, Martin

      Pool)

    * New command ``bzr version-info`` which can be used to get a summary

      of the current state of the tree. This is especially useful as part

      of a build commands. See ``doc/version_info.txt`` for more information 

      (John Arbash Meinel)

  BUG FIXES:

    * 'bzr inventory [FILE...]' allows restricting the file list to a

      specific set of files. (John Arbash Meinel, #3631)

    * Don't abort when annotating empty files (John Arbash Meinel, #56814)

    * Add ``Stanza.to_unicode()`` which can be passed to another Stanza

      when nesting stanzas. Also, add ``read_stanza_unicode`` to handle when

      reading a nested Stanza. (John Arbash Meinel)

    * Transform._set_mode() needs to stat the right file. 

      (John Arbash Meinel, #56549)

    * Raise WeaveFormatError rather than StopIteration when trying to read

      an empty Weave file. (John Arbash Meinel, #46871)

    * Don't access e.code for generic URLErrors, only HTTPErrors have .code.

      (Vincent Ladeuil, #59835)

    * Handle boundary="" lines properly to allow access through a Squid proxy.

      (John Arbash Meinel, #57723)

    * revert now removes newly-added directories (Aaron Bentley, #54172)

    * ``bzr upgrade sftp://`` shouldn't fail to upgrade v6 branches if there 

      isn't a working tree. (David Allouche, #40679)

    * Give nicer error messages when a user supplies an invalid --revision

      parameter. (John Arbash Meinel, #55420)

    * Handle when LANG is not recognized by python. Emit a warning, but

      just revert to using 'ascii'. (John Arbash Meinel, #35392)

    * Don't use preexec_fn on win32, as it is not supported by subprocess.

      (John Arbash Meinel)

    * Skip specific tests when the dependencies aren't met. This includes

      some ``setup.py`` tests when ``python-dev`` is not available, and

      some tests that depend on paramiko. (John Arbash Meinel, Mattheiu Moy)

    * Fallback to Paramiko properly, if no ``ssh`` executable exists on

      the system. (Andrew Bennetts, John Arbash Meinel)

    * ``Branch.bind(other_branch)`` no longer takes a write lock on the

      other branch, and will not push or pull between the two branches.

      API users will need to perform a push or pull or update operation if they

      require branch synchronisation to take place. (Robert Collins, #47344)

    * When creating a tarball or zipfile export, export unicode names as utf-8

      paths. This may not work perfectly on all platforms, but has the best

      chance of working in the common case. (John Arbash Meinel, #56816)

    * When committing, only files that exist in working tree or basis tree

      may be specified (Aaron Bentley, #50793)

  PORTABILITY:

    * Fixes to run on Python 2.5 (Brian M. Carlson, Martin Pool, Marien Zwart)

  INTERNALS:

    * TestCaseInTempDir now creates a separate directory for HOME, rather

      than having HOME set to the same location as the working directory.

      (John Arbash Meinel)

    * run_bzr_subprocess() can take an optional 'env_changes={}' parameter,

      which will update os.environ inside the spawned child. It also can

      take a 'universal_newlines=True', which helps when checking the output

      of the command. (John Arbash Meinel)

    * Refactor SFTP vendors to allow easier re-use when ssh is used. 

      (Andrew Bennetts)

    * Transport.list_dir() and Transport.iter_files_recursive() should always

      return urlescaped paths. This is now tested (there were bugs in a few

      of the transports) (Andrew Bennetts, David Allouche, John Arbash Meinel)

    * New utility function symbol_versioning.deprecation_string. Returns the

      formatted string for a callable, deprecation format pair. (Robert Collins)

    * New TestCase helper applyDeprecated. This allows you to call a callable

      which is deprecated without it spewing to the screen, just by supplying

      the deprecation format string issued for it. (Robert Collins)

    * Transport.append and Transport.put have been deprecated in favor of

      .append_bytes, .append_file, .put_bytes, and .put_file. This removes the

      ambiguity in what type of object the functions take.

      Transport.non_atomic_put_{bytes,file} has also been added. Which works

      similarly to Transport.append() except for SFTP, it doesn't have a round

      trip when opening the file. Also, it provides functionality for creating

      a parent directory when trying to create a file, rather than raise

      NoSuchFile and forcing the caller to repeat their request.

      (John Arbash Meinel)

    * WorkingTree has a new api ``unversion`` which allow the unversioning of

      entries by their file id. (Robert Collins)

    * WorkingTree.pending_merges is deprecated.  Please use the get_parent_ids

      (introduced in 0.10) method instead. (Robert Collins)

    * WorkingTree has a new lock_tree_write method which locks the branch for

      read rather than write. This is appropriate for actions which only need

      the branch data for reference rather than mutation. A new decorator

      needs_tree_write_lock is provided in the workingtree module. Like the

      needs_read_lock and needs_write_lock decorators this allows static 

      declaration of the locking requirements of a function to ensure that

      a lock is taken out for casual scripts. (Robert Collins, #54107)

    * All WorkingTree methods which write to the tree, but not to the branch

      have been converted to use ``needs_tree_write_lock`` rather than 

      ``needs_write_lock``. Also converted is the revert, conflicts and tree

      transform modules. This provides a modest performance improvement on 

      metadir style trees, due to the reduce lock-acquisition, and a more

      significant performance improvement on lightweight checkouts from 

      remote branches, where trivial operations used to pay a significant 

      penalty. It also provides the basis for allowing readonly checkouts.

      (Robert Collins)

    * Special case importing the standard library 'copy' module. This shaves

      off 40ms of startup time, while retaining compatibility. See:

      ``bzrlib/inspect_for_copy.py`` for more details. (John Arbash Meinel)

    * WorkingTree has a new parent class MutableTree which represents the 

      specialisations of Tree which are able to be altered. (Robert Collins)

    * New methods mkdir and put_file_bytes_non_atomic on MutableTree that

      mutate the tree and its contents. (Robert Collins)

    * Transport behaviour at the root of the URL is now defined and tested.

      (Andrew Bennetts, Robert Collins)

  TESTING:

    * New test helper classs MemoryTree. This is typically accessed via

      ``self.make_branch_and_memory_tree()`` in test cases. (Robert Collins)

    * Add start_bzr_subprocess and stop_bzr_subprocess to allow test code to

      continue running concurrently with a subprocess of bzr. (Andrew Bennetts,

      Robert Collins)

    * Add a new method ``Transport.get_smart_client()``. This is provided to

      allow upgrades to a richer interface than the VFS one provided by

      Transport. (Andrew Bennetts, Martin Pool)

bzr 0.10  2006-08-29

  IMPROVEMENTS:

    * 'merge' now takes --uncommitted, to apply uncommitted changes from a

      tree.  (Aaron Bentley)

    * 'bzr add --file-ids-from' can be used to specify another path to use

      for creating file ids, rather than generating all new ones. Internally,

      the 'action' passed to smart_add_tree() can return file_ids that

      will be used, rather than having bzrlib generate new ones.

      (John Arbash Meinel, #55781)

    * ``bzr selftest --benchmark`` now allows a ``--cache-dir`` parameter.

      This will cache some of the intermediate trees, and decrease the

      setup time for benchmark tests. (John Arbash Meinel)

    * Inverse forms are provided for all boolean options.  For example,

      --strict has --no-strict, --no-recurse has --recurse (Aaron Bentley)

    * Serialize out Inventories directly, rather than using ElementTree.

      Writing out a kernel sized inventory drops from 2s down to ~350ms.

      (Robert Collins, John Arbash Meinel)

  BUG FIXES:

    * Help diffutils 2.8.4 get along with binary tests (Marien Zwart: #57614)

    * Change LockDir so that if the lock directory doesn't exist when

      lock_write() is called, an attempt will be made to create it.

      (John Arbash Meinel, #56974)

    * ``bzr uncommit`` preserves pending merges. (John Arbash Meinel, #57660)

    * Active FTP transport now works as intended. (ghozzy, #56472)

    * Really fix mutter() so that it won't ever raise a UnicodeError.

      It means it is possible for ~/.bzr.log to contain non UTF-8 characters.

      But it is a debugging log, not a real user file.

      (John Arbash Meinel, #56947, #53880)

    * Change Command handle to allow Unicode command and options.

      At present we cannot register Unicode command names, so we will get

      BzrCommandError('unknown command'), or BzrCommandError('unknown option')

      But that is better than a UnicodeError + a traceback.

      (John Arbash Meinel, #57123)

    * Handle TZ=UTC properly when reading/writing revisions.

      (John Arbash Meinel, #55783, #56290)

    * Use GPG_TTY to allow gpg --cl to work with gpg-agent in a pipeline,

      (passing text to sign in on stdin). (John Arbash Meinel, #54468)

    * External diff does the right thing for binaries even in foreign 

      languages. (John Arbash Meinel, #56307)

    * Testament handles more cases when content is unicode. Specific bug was

      in handling of revision properties. (John Arbash Meinel, Holger Krekel,

      #54723)

    * The bzr selftest was failing on installed versions due to a bug in a new

      test helper. (John Arbash Meinel, Robert Collins, #58057)

  INTERNALS:

    * ``bzrlib.cache_utf8`` contains ``encode()`` and ``decode()`` functions

      which can be used to cache the conversion between utf8 and Unicode.

      Especially helpful for some of the knit annotation code, which has to

      convert revision ids to utf8 to annotate lines in storage.

      (John Arbash Meinel)

    * ``setup.py`` now searches the filesystem to find all packages which

      need to be installed. This should help make the life of packagers

      easier. (John Arbash Meinel)

bzr 0.9.0  2006-08-11

  SURPRISES:

   * The hard-coded built-in ignore rules have been removed. There are

     now two rulesets which are enforced. A user global one in 

     ~/.bazaar/ignore which will apply to every tree, and the tree

     specific one '.bzrignore'.

     ~/.bazaar/ignore will be created if it does not exist, but with

     a more conservative list than the old default.

     This fixes bugs with default rules being enforced no matter what. 

     The old list of ignore rules from bzr is available by

     running 'bzr ignore --old-default-rules'.

     (Robert Collins, Martin Pool, John Arbash Meinel)

   * 'branches.conf' has been changed to 'locations.conf', since it can apply

     to more locations than just branch locations.

     (Aaron Bentley)

  IMPROVEMENTS:

   * The revision specifier "revno:" is extended to accept the syntax

     revno:N:branch. For example,

     revno:42:http://bazaar-vcs.org/bzr/bzr.dev/ means revision 42 in

     bzr.dev.  (Matthieu Moy)

   * Tests updates to ensure proper URL handling, UNICODE support, and

     proper printing when the user's terminal encoding cannot display 

     the path of a file that has been versioned.

     ``bzr branch`` can take a target URL rather than only a local directory.

     Branch.get_parent()/set_parent() now save a relative path if possible,

     and normalize the parent based on root, allowing access across

     different transports. (John Arbash Meinel, Wouter van Heyst, Martin Pool)

     (Malone #48906, #42699, #40675, #5281, #3980, #36363, #43689,

      #42517, #42514)

   * On Unix, detect terminal width using an ioctl not just $COLUMNS.

     Use terminal width for single-line logs from ``bzr log --line`` and

     pending-merge display.  (Robert Widhopf-Fenk, Gustavo Niemeyer)

     (Malone #3507)

   * On Windows, detect terminal width using GetConsoleScreenBufferInfo.

     (Alexander Belchenko)

   * Speedup improvement for 'date:'-revision search. (Guillaume Pinot).

   * Show the correct number of revisions pushed when pushing a new branch.

     (Robert Collins).

   * 'bzr selftest' now shows a progress bar with the number of tests, and 

     progress made. 'make check' shows tests in -v mode, to be more useful

     for the PQM status window. (Robert Collins).

     When using a progress bar, failed tests are printed out, rather than

     being overwritten by the progress bar until the suite finishes.

     (John Arbash Meinel)

   * 'bzr selftest --benchmark' will run a new benchmarking selftest.

     'bzr selftest --benchmark --lsprof-timed' will use lsprofile to generate

     profile data for the individual profiled calls, allowing for fine

     grained analysis of performance.

     (Robert Collins, Martin Pool).

   * 'bzr commit' shows a progress bar. This is useful for commits over sftp

     where commit can take an appreciable time. (Robert Collins)

   * 'bzr add' is now less verbose in telling you what ignore globs were

     matched by files being ignored. Instead it just tells you how many 

     were ignored (because you might reasonably be expecting none to be

     ignored). 'bzr add -v' is unchanged and will report every ignored

     file. (Robert Collins).

   * ftp now has a test server if medusa is installed. As part of testing,

     ftp support has been improved, including support for supplying a

     non-standard port. (John Arbash Meinel).

   * 'bzr log --line' shows the revision number, and uses only the

     first line of the log message (#5162, Alexander Belchenko;

     Matthieu Moy)

   * 'bzr status' has had the --all option removed. The 'bzr ls' command

     should be used to retrieve all versioned files. (Robert Collins)

   * 'bzr bundle OTHER/BRANCH' will create a bundle which can be sent

     over email, and applied on the other end, while maintaining ancestry.

     This bundle can be applied with either 'bzr merge' or 'bzr pull',

     the same way you would apply another branch.

     (John Arbash Meinel, Aaron Bentley)

   * 'bzr whoami' can now be used to set your identity from the command line,

     for a branch or globally.  (Robey Pointer)

   * 'bzr checkout' now aliased to 'bzr co', and 'bzr annotate' to 'bzr ann'.

     (Michael Ellerman)

   * 'bzr revert DIRECTORY' now reverts the contents of the directory as well.

     (Aaron Bentley)

   * 'bzr get sftp://foo' gives a better error when paramiko is not present.

     Also updates things like 'http+pycurl://' if pycurl is not present.

     (John Arbash Meinel) (Malone #47821, #52204)

   * New env variable BZR_PROGRESS_BAR, sets the default progress bar type.

     Can be set to 'none' or 'dummy' to disable the progress bar, 'dots' or 

     'tty' to create the respective type. (John Arbash Meinel, #42197, #51107)

   * Improve the help text for 'bzr diff' to explain what various options do.

     (John Arbash Meinel, #6391)

   * 'bzr uncommit -r 10' now uncommits revisions 11.. rather than uncommitting

     revision 10. This makes -r10 more in line with what other commands do.

     'bzr uncommit' also now saves the pending merges of the revisions that

     were removed. So it is safe to uncommit after a merge, fix something,

     and commit again. (John Arbash Meinel, #32526, #31426)

   * 'bzr init' now also works on remote locations.

     (Wouter van Heyst, #48904)

   * HTTP support has been updated. When using pycurl we now support 

     connection keep-alive, which reduces dns requests and round trips.

     And for both urllib and pycurl we support multi-range requests, 

     which decreases the number of round-trips. Performance results for