/brz/remove-bazaar : contents of bzrlib/smart/medium.py at revision 3431.3.7

: (revision 3431.3.7)

To get this branch, use:

bzr branch
http://gegoxaren.bato24.eu/bzr/brz/remove-bazaar

# Copyright (C) 2006 Canonical Ltd
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

"""The 'medium' layer for the smart servers and clients.

"Medium" here is the noun meaning "a means of transmission", not the adjective
for "the quality between big and small."

Media carry the bytes of the requests somehow (e.g. via TCP, wrapped in HTTP, or
over SSH), and pass them to and from the protocol logic.  See the overview in
bzrlib/transport/smart/__init__.py.
"""

import os
import socket
import sys

from bzrlib import (
    errors,
    osutils,
    symbol_versioning,
    )
from bzrlib.smart.protocol import (
    MESSAGE_VERSION_THREE,
    REQUEST_VERSION_TWO,
    SmartClientRequestProtocolOne,
    SmartServerRequestProtocolOne,
    SmartServerRequestProtocolTwo,
    build_server_protocol_three
    )
from bzrlib.transport import ssh


def _get_protocol_factory_for_bytes(bytes):
    """Determine the right protocol factory for 'bytes'.

    This will return an appropriate protocol factory depending on the version
    of the protocol being used, as determined by inspecting the given bytes.
    The bytes should have at least one newline byte (i.e. be a whole line),
    otherwise it's possible that a request will be incorrectly identified as
    version 1.

    Typical use would be::

         factory, unused_bytes = _get_protocol_factory_for_bytes(bytes)
         server_protocol = factory(transport, write_func, root_client_path)
         server_protocol.accept_bytes(unused_bytes)

    :param bytes: a str of bytes of the start of the request.
    :returns: 2-tuple of (protocol_factory, unused_bytes).  protocol_factory is
        a callable that takes three args: transport, write_func,
        root_client_path.  unused_bytes are any bytes that were not part of a
        protocol version marker.
    """
    if bytes.startswith(MESSAGE_VERSION_THREE):
        protocol_factory = build_server_protocol_three
        bytes = bytes[len(MESSAGE_VERSION_THREE):]
    elif bytes.startswith(REQUEST_VERSION_TWO):
        protocol_factory = SmartServerRequestProtocolTwo
        bytes = bytes[len(REQUEST_VERSION_TWO):]
    else:
        protocol_factory = SmartServerRequestProtocolOne
    return protocol_factory, bytes


class SmartServerStreamMedium(object):
    """Handles smart commands coming over a stream.

    The stream may be a pipe connected to sshd, or a tcp socket, or an
    in-process fifo for testing.

    One instance is created for each connected client; it can serve multiple
    requests in the lifetime of the connection.

    The server passes requests through to an underlying backing transport, 
    which will typically be a LocalTransport looking at the server's filesystem.

    :ivar _push_back_buffer: a str of bytes that have been read from the stream
        but not used yet, or None if there are no buffered bytes.  Subclasses
        should make sure to exhaust this buffer before reading more bytes from
        the stream.  See also the _push_back method.
    """

    def __init__(self, backing_transport, root_client_path='/'):
        """Construct new server.

        :param backing_transport: Transport for the directory served.
        """
        # backing_transport could be passed to serve instead of __init__
        self.backing_transport = backing_transport
        self.root_client_path = root_client_path
        self.finished = False
        self._push_back_buffer = None

    def _push_back(self, bytes):
        """Return unused bytes to the medium, because they belong to the next
        request(s).

        This sets the _push_back_buffer to the given bytes.
        """
        if self._push_back_buffer is not None:
            raise AssertionError(
                "_push_back called when self._push_back_buffer is %r"
                % (self._push_back_buffer,))
        if bytes == '':
            return
        self._push_back_buffer = bytes

    def _get_push_back_buffer(self):
        if self._push_back_buffer == '':
            raise AssertionError(
                '%s._push_back_buffer should never be the empty string, '
                'which can be confused with EOF' % (self,))
        bytes = self._push_back_buffer
        self._push_back_buffer = None
        return bytes

    def serve(self):
        """Serve requests until the client disconnects."""
        # Keep a reference to stderr because the sys module's globals get set to
        # None during interpreter shutdown.
        from sys import stderr
        try:
            while not self.finished:
                server_protocol = self._build_protocol()
                self._serve_one_request(server_protocol)
        except Exception, e:
            stderr.write("%s terminating on exception %s\n" % (self, e))
            raise

    def _build_protocol(self):
        """Identifies the version of the incoming request, and returns an
        a protocol object that can interpret it.

        If more bytes than the version prefix of the request are read, they will
        be fed into the protocol before it is returned.

        :returns: a SmartServerRequestProtocol.
        """
        bytes = self._get_line()
        protocol_factory, unused_bytes = _get_protocol_factory_for_bytes(bytes)
        protocol = protocol_factory(
            self.backing_transport, self._write_out, self.root_client_path)
        protocol.accept_bytes(unused_bytes)
        return protocol

    def _serve_one_request(self, protocol):
        """Read one request from input, process, send back a response.
        
        :param protocol: a SmartServerRequestProtocol.
        """
        try:
            self._serve_one_request_unguarded(protocol)
        except KeyboardInterrupt:
            raise
        except Exception, e:
            self.terminate_due_to_error()

    def terminate_due_to_error(self):
        """Called when an unhandled exception from the protocol occurs."""
        raise NotImplementedError(self.terminate_due_to_error)

    def _get_bytes(self, desired_count):
        """Get some bytes from the medium.

        :param desired_count: number of bytes we want to read.
        """
        raise NotImplementedError(self._get_bytes)

    def _get_line(self):
        """Read bytes from this request's response until a newline byte.
        
        This isn't particularly efficient, so should only be used when the
        expected size of the line is quite short.

        :returns: a string of bytes ending in a newline (byte 0x0A).
        """
        newline_pos = -1
        bytes = ''
        while newline_pos == -1:
            new_bytes = self._get_bytes(1)
            bytes += new_bytes
            if new_bytes == '':
                # Ran out of bytes before receiving a complete line.
                return bytes
            newline_pos = bytes.find('\n')
        line = bytes[:newline_pos+1]
        self._push_back(bytes[newline_pos+1:])
        return line
 

class SmartServerSocketStreamMedium(SmartServerStreamMedium):

    def __init__(self, sock, backing_transport, root_client_path='/'):
        """Constructor.

        :param sock: the socket the server will read from.  It will be put
            into blocking mode.
        """
        SmartServerStreamMedium.__init__(
            self, backing_transport, root_client_path=root_client_path)
        sock.setblocking(True)
        self.socket = sock

    def _serve_one_request_unguarded(self, protocol):
        while protocol.next_read_size():
            bytes = self._get_bytes(4096)
            if bytes == '':
                self.finished = True
                return
            protocol.accept_bytes(bytes)
        
        self._push_back(protocol.unused_data)

    def _get_bytes(self, desired_count):
        if self._push_back_buffer is not None:
            return self._get_push_back_buffer()
        # We ignore the desired_count because on sockets it's more efficient to
        # read 4k at a time.
        return self.socket.recv(4096)
    
    def terminate_due_to_error(self):
        # TODO: This should log to a server log file, but no such thing
        # exists yet.  Andrew Bennetts 2006-09-29.
        self.socket.close()
        self.finished = True

    def _write_out(self, bytes):
        osutils.send_all(self.socket, bytes)


class SmartServerPipeStreamMedium(SmartServerStreamMedium):

    def __init__(self, in_file, out_file, backing_transport):
        """Construct new server.

        :param in_file: Python file from which requests can be read.
        :param out_file: Python file to write responses.
        :param backing_transport: Transport for the directory served.
        """
        SmartServerStreamMedium.__init__(self, backing_transport)
        if sys.platform == 'win32':
            # force binary mode for files
            import msvcrt
            for f in (in_file, out_file):
                fileno = getattr(f, 'fileno', None)
                if fileno:
                    msvcrt.setmode(fileno(), os.O_BINARY)
        self._in = in_file
        self._out = out_file

    def _serve_one_request_unguarded(self, protocol):
        while True:
            bytes_to_read = protocol.next_read_size()
            if bytes_to_read == 0:
                # Finished serving this request.
                self._out.flush()
                return
            bytes = self._get_bytes(bytes_to_read)
            if bytes == '':
                # Connection has been closed.
                self.finished = True
                self._out.flush()
                return
            protocol.accept_bytes(bytes)

    def _get_bytes(self, desired_count):
        if self._push_back_buffer is not None:
            return self._get_push_back_buffer()
        return self._in.read(desired_count)

    def terminate_due_to_error(self):
        # TODO: This should log to a server log file, but no such thing
        # exists yet.  Andrew Bennetts 2006-09-29.
        self._out.close()
        self.finished = True

    def _write_out(self, bytes):
        self._out.write(bytes)


class SmartClientMediumRequest(object):
    """A request on a SmartClientMedium.

    Each request allows bytes to be provided to it via accept_bytes, and then
    the response bytes to be read via read_bytes.

    For instance:
    request.accept_bytes('123')
    request.finished_writing()
    result = request.read_bytes(3)
    request.finished_reading()

    It is up to the individual SmartClientMedium whether multiple concurrent
    requests can exist. See SmartClientMedium.get_request to obtain instances 
    of SmartClientMediumRequest, and the concrete Medium you are using for 
    details on concurrency and pipelining.
    """

    def __init__(self, medium):
        """Construct a SmartClientMediumRequest for the medium medium."""
        self._medium = medium
        # we track state by constants - we may want to use the same
        # pattern as BodyReader if it gets more complex.
        # valid states are: "writing", "reading", "done"
        self._state = "writing"

    def accept_bytes(self, bytes):
        """Accept bytes for inclusion in this request.

        This method may not be be called after finished_writing() has been
        called.  It depends upon the Medium whether or not the bytes will be
        immediately transmitted. Message based Mediums will tend to buffer the
        bytes until finished_writing() is called.

        :param bytes: A bytestring.
        """
        if self._state != "writing":
            raise errors.WritingCompleted(self)
        self._accept_bytes(bytes)

    def _accept_bytes(self, bytes):
        """Helper for accept_bytes.

        Accept_bytes checks the state of the request to determing if bytes
        should be accepted. After that it hands off to _accept_bytes to do the
        actual acceptance.
        """
        raise NotImplementedError(self._accept_bytes)

    def finished_reading(self):
        """Inform the request that all desired data has been read.

        This will remove the request from the pipeline for its medium (if the
        medium supports pipelining) and any further calls to methods on the
        request will raise ReadingCompleted.
        """
        if self._state == "writing":
            raise errors.WritingNotComplete(self)
        if self._state != "reading":
            raise errors.ReadingCompleted(self)
        self._state = "done"
        self._finished_reading()

    def _finished_reading(self):
        """Helper for finished_reading.

        finished_reading checks the state of the request to determine if 
        finished_reading is allowed, and if it is hands off to _finished_reading
        to perform the action.
        """
        raise NotImplementedError(self._finished_reading)

    def finished_writing(self):
        """Finish the writing phase of this request.

        This will flush all pending data for this request along the medium.
        After calling finished_writing, you may not call accept_bytes anymore.
        """
        if self._state != "writing":
            raise errors.WritingCompleted(self)
        self._state = "reading"
        self._finished_writing()

    def _finished_writing(self):
        """Helper for finished_writing.

        finished_writing checks the state of the request to determine if 
        finished_writing is allowed, and if it is hands off to _finished_writing
        to perform the action.
        """
        raise NotImplementedError(self._finished_writing)

    def read_bytes(self, count):
        """Read bytes from this requests response.

        This method will block and wait for count bytes to be read. It may not
        be invoked until finished_writing() has been called - this is to ensure
        a message-based approach to requests, for compatibility with message
        based mediums like HTTP.
        """
        if self._state == "writing":
            raise errors.WritingNotComplete(self)
        if self._state != "reading":
            raise errors.ReadingCompleted(self)
        return self._read_bytes(count)

    def _read_bytes(self, count):
        """Helper for read_bytes.

        read_bytes checks the state of the request to determing if bytes
        should be read. After that it hands off to _read_bytes to do the
        actual read.
        """
        raise NotImplementedError(self._read_bytes)

    def read_line(self):
        """Read bytes from this request's response until a newline byte.
        
        This isn't particularly efficient, so should only be used when the
        expected size of the line is quite short.

        :returns: a string of bytes ending in a newline (byte 0x0A).
        """
        # XXX: this duplicates SmartClientRequestProtocolOne._recv_tuple
        line = ''
        while not line or line[-1] != '\n':
            new_char = self.read_bytes(1)
            line += new_char
            if new_char == '':
                # end of file encountered reading from server
                raise errors.ConnectionReset(
                    "please check connectivity and permissions",
                    "(and try -Dhpss if further diagnosis is required)")
        return line


class SmartClientMedium(object):
    """Smart client is a medium for sending smart protocol requests over."""

    def __init__(self, base):
        super(SmartClientMedium, self).__init__()
        self.base = base
        self._protocol_version_error = None
        self._protocol_version = None
        self._done_hello = False

    def protocol_version(self):
        """Find out if 'hello' smart request works."""
        if self._protocol_version_error is not None:
            raise self._protocol_version_error
        if not self._done_hello:
            try:
                medium_request = self.get_request()
                # Send a 'hello' request in protocol version one, for maximum
                # backwards compatibility.
                client_protocol = SmartClientRequestProtocolOne(medium_request)
                client_protocol.query_version()
                self._done_hello = True
            except errors.SmartProtocolError, e:
                # Cache the error, just like we would cache a successful
                # result.
                self._protocol_version_error = e
                raise
        return '2'

    def should_probe(self):
        """Should RemoteBzrDirFormat.probe_transport send a smart request on
        this medium?

        Some transports are unambiguously smart-only; there's no need to check
        if the transport is able to carry smart requests, because that's all
        it is for.  In those cases, this method should return False.

        But some HTTP transports can sometimes fail to carry smart requests,
        but still be usuable for accessing remote bzrdirs via plain file
        accesses.  So for those transports, their media should return True here
        so that RemoteBzrDirFormat can determine if it is appropriate for that
        transport.
        """
        return False

    def disconnect(self):
        """If this medium maintains a persistent connection, close it.
        
        The default implementation does nothing.
        """
        

class SmartClientStreamMedium(SmartClientMedium):
    """Stream based medium common class.

    SmartClientStreamMediums operate on a stream. All subclasses use a common
    SmartClientStreamMediumRequest for their requests, and should implement
    _accept_bytes and _read_bytes to allow the request objects to send and
    receive bytes.
    """

    def __init__(self, base):
        SmartClientMedium.__init__(self, base)
        self._current_request = None
        # Be optimistic: we assume the remote end can accept new remote
        # requests until we get an error saying otherwise.  (1.2 adds some
        # requests that send bodies, which confuses older servers.)
        self._remote_is_at_least_1_2 = True

    def accept_bytes(self, bytes):
        self._accept_bytes(bytes)

    def __del__(self):
        """The SmartClientStreamMedium knows how to close the stream when it is
        finished with it.
        """
        self.disconnect()

    def _flush(self):
        """Flush the output stream.
        
        This method is used by the SmartClientStreamMediumRequest to ensure that
        all data for a request is sent, to avoid long timeouts or deadlocks.
        """
        raise NotImplementedError(self._flush)

    def get_request(self):
        """See SmartClientMedium.get_request().

        SmartClientStreamMedium always returns a SmartClientStreamMediumRequest
        for get_request.
        """
        return SmartClientStreamMediumRequest(self)

    def read_bytes(self, count):
        return self._read_bytes(count)


class SmartSimplePipesClientMedium(SmartClientStreamMedium):
    """A client medium using simple pipes.
    
    This client does not manage the pipes: it assumes they will always be open.
    """

    def __init__(self, readable_pipe, writeable_pipe, base):
        SmartClientStreamMedium.__init__(self, base)
        self._readable_pipe = readable_pipe
        self._writeable_pipe = writeable_pipe

    def _accept_bytes(self, bytes):
        """See SmartClientStreamMedium.accept_bytes."""
        self._writeable_pipe.write(bytes)

    def _flush(self):
        """See SmartClientStreamMedium._flush()."""
        self._writeable_pipe.flush()

    def _read_bytes(self, count):
        """See SmartClientStreamMedium._read_bytes."""
        return self._readable_pipe.read(count)


class SmartSSHClientMedium(SmartClientStreamMedium):
    """A client medium using SSH."""
    
    def __init__(self, host, port=None, username=None, password=None,
            base=None, vendor=None, bzr_remote_path=None):
        """Creates a client that will connect on the first use.
        
        :param vendor: An optional override for the ssh vendor to use. See
            bzrlib.transport.ssh for details on ssh vendors.
        """
        SmartClientStreamMedium.__init__(self, base)
        self._connected = False
        self._host = host
        self._password = password
        self._port = port
        self._username = username
        self._read_from = None
        self._ssh_connection = None
        self._vendor = vendor
        self._write_to = None
        self._bzr_remote_path = bzr_remote_path
        if self._bzr_remote_path is None:
            symbol_versioning.warn(
                'bzr_remote_path is required as of bzr 0.92',
                DeprecationWarning, stacklevel=2)
            self._bzr_remote_path = os.environ.get('BZR_REMOTE_PATH', 'bzr')

    def _accept_bytes(self, bytes):
        """See SmartClientStreamMedium.accept_bytes."""
        self._ensure_connection()
        self._write_to.write(bytes)

    def disconnect(self):
        """See SmartClientMedium.disconnect()."""
        if not self._connected:
            return
        self._read_from.close()
        self._write_to.close()
        self._ssh_connection.close()
        self._connected = False

    def _ensure_connection(self):
        """Connect this medium if not already connected."""
        if self._connected:
            return
        if self._vendor is None:
            vendor = ssh._get_ssh_vendor()
        else:
            vendor = self._vendor
        self._ssh_connection = vendor.connect_ssh(self._username,
                self._password, self._host, self._port,
                command=[self._bzr_remote_path, 'serve', '--inet',
                         '--directory=/', '--allow-writes'])
        self._read_from, self._write_to = \
            self._ssh_connection.get_filelike_channels()
        self._connected = True

    def _flush(self):
        """See SmartClientStreamMedium._flush()."""
        self._write_to.flush()

    def _read_bytes(self, count):
        """See SmartClientStreamMedium.read_bytes."""
        if not self._connected:
            raise errors.MediumNotConnected(self)
        return self._read_from.read(count)


# Port 4155 is the default port for bzr://, registered with IANA.
BZR_DEFAULT_INTERFACE = '0.0.0.0'
BZR_DEFAULT_PORT = 4155


class SmartTCPClientMedium(SmartClientStreamMedium):
    """A client medium using TCP."""
    
    def __init__(self, host, port, base):
        """Creates a client that will connect on the first use."""
        SmartClientStreamMedium.__init__(self, base)
        self._connected = False
        self._host = host
        self._port = port
        self._socket = None

    def _accept_bytes(self, bytes):
        """See SmartClientMedium.accept_bytes."""
        self._ensure_connection()
        osutils.send_all(self._socket, bytes)

    def disconnect(self):
        """See SmartClientMedium.disconnect()."""
        if not self._connected:
            return
        self._socket.close()
        self._socket = None
        self._connected = False

    def _ensure_connection(self):
        """Connect this medium if not already connected."""
        if self._connected:
            return
        self._socket = socket.socket()
        self._socket.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1)
        if self._port is None:
            port = BZR_DEFAULT_PORT
        else:
            port = int(self._port)
        try:
            self._socket.connect((self._host, port))
        except socket.error, err:
            # socket errors either have a (string) or (errno, string) as their
            # args.
            if type(err.args) is str:
                err_msg = err.args
            else:
                err_msg = err.args[1]
            raise errors.ConnectionError("failed to connect to %s:%d: %s" %
                    (self._host, port, err_msg))
        self._connected = True

    def _flush(self):
        """See SmartClientStreamMedium._flush().
        
        For TCP we do no flushing. We may want to turn off TCP_NODELAY and 
        add a means to do a flush, but that can be done in the future.
        """

    def _read_bytes(self, count):
        """See SmartClientMedium.read_bytes."""
        if not self._connected:
            raise errors.MediumNotConnected(self)
        return self._socket.recv(count)


class SmartClientStreamMediumRequest(SmartClientMediumRequest):
    """A SmartClientMediumRequest that works with an SmartClientStreamMedium."""

    def __init__(self, medium):
        SmartClientMediumRequest.__init__(self, medium)
        # check that we are safe concurrency wise. If some streams start
        # allowing concurrent requests - i.e. via multiplexing - then this
        # assert should be moved to SmartClientStreamMedium.get_request,
        # and the setting/unsetting of _current_request likewise moved into
        # that class : but its unneeded overhead for now. RBC 20060922
        if self._medium._current_request is not None:
            raise errors.TooManyConcurrentRequests(self._medium)
        self._medium._current_request = self

    def _accept_bytes(self, bytes):
        """See SmartClientMediumRequest._accept_bytes.
        
        This forwards to self._medium._accept_bytes because we are operating
        on the mediums stream.
        """
        self._medium._accept_bytes(bytes)

    def _finished_reading(self):
        """See SmartClientMediumRequest._finished_reading.

        This clears the _current_request on self._medium to allow a new 
        request to be created.
        """
        if self._medium._current_request is not self:
            raise AssertionError()
        self._medium._current_request = None
        
    def _finished_writing(self):
        """See SmartClientMediumRequest._finished_writing.

        This invokes self._medium._flush to ensure all bytes are transmitted.
        """
        self._medium._flush()

    def _read_bytes(self, count):
        """See SmartClientMediumRequest._read_bytes.
        
        This forwards to self._medium._read_bytes because we are operating
        on the mediums stream.
        """
        return self._medium._read_bytes(count)
