5
* .bzrignore is excluded from exports, on the grounds that it's a bzr
6
internal-use file and may not be wanted. (Jamie Wilkinson)
8
* The "bzr directories" command were removed in favor of the new
9
--kind option to the "bzr inventory" command. To list all
10
versioned directories, now use "bzr inventory --kind directory".
13
* Under Windows configuration directory is now %APPDATA%\bazaar\2.0
14
by default. (John Arbash Meinel)
16
* The parent of Bzr configuration directory can be set by BZR_HOME
17
environment variable. Now the path for it is searched in BZR_HOME, then
18
in HOME. Under Windows the order is: BZR_HOME, APPDATA (usually
19
points to C:\Documents and Settings\User Name\Application Data), HOME.
22
* Plugins with the same name in different directories in the bzr plugin
23
path are no longer loaded: only the first successfully loaded one is
24
used. (Robert Collins)
26
* Use systems' external ssh command to open connections if possible.
27
This gives better integration with user settings such as ProxyCommand.
30
* Sftp paths can now be relative, or local, according to the IETF
31
draft spec. Paths now take the form:
32
sftp://user:pass@host:port/relative/path
34
sftp://user:pass@host:port/%2Fabsolute/path
36
sftp://user:pass@host:port//absolute/path
38
* configure.in and config.guess are no longer in the builtin default
43
* "bzr INIT dir" now initializes the specified directory, and creates
44
it if it does not exist. (John Arbash Meinel)
46
* New remerge command (Aaron Bentley)
48
* Better zsh completion script. (Steve Borho)
50
* 'bzr diff' now returns 1 when there are changes in the working
51
tree. (Robert Collins)
53
* 'bzr push' now exists and can push changes to a remote location.
54
This uses the transport infrastructure, and can store the remote
55
location in the ~/.bazaar/branches.conf configuration file.
58
* Test directories are only kept if the test fails and the user requests
61
* Tweaks to short log printing
63
* Added branch nicks, new nick command, printing them in log output.
66
* If $BZR_PDB is set, pop into the debugger when an uncaught exception
69
* Accept 'bzr resolved' (an alias for 'bzr resolve'), as this is
70
the same as Subversion. (Martin Pool)
72
* New ftp transport support (on ftplib), for ftp:// and aftp://
73
URLs. (Daniel Silverstone)
75
* Commit editor temporary files now start with 'bzr_log.', to allow
76
text editors to match the file name and set up appropriate modes or
77
settings. (Magnus Therning)
79
* Improved performance when integrating changes from a remote weave.
82
* Sftp will attempt to cache the connection, so it is more likely that
83
a connection will be reused, rather than requiring multiple password
86
* bzr revno now takes an optional argument indicating the branch whose
87
revno should be printed. (Michael Ellerman)
89
* bzr cat defaults to printing the last version of the file.
92
* New global option 'bzr --lsprof COMMAND' runs bzr under the lsprof
93
profiler. (Denys Duchier)
95
* Faster commits by reading only the headers of affected weave files.
98
* 'bzr add' now takes a --dry-run parameter which shows you what would be
99
added, but doesn't actually add anything. (Michael Ellerman)
101
* bzr add now lists how many files were ignored per glob. add --verbose
102
lists the specific files. (Aaron Bentley)
106
* SFTP can walk up to the root path without index errors. (Robert Collins)
108
* Fix bugs in running bzr with 'python -O'. (Martin Pool)
110
* Error when run with -OO
112
* Fix bug in reporting http errors that don't have an http error code.
115
* Handle more cases of pipe errors in display commands
117
* Change status to 3 for all errors
119
* Files that are added and unlinked before committing are completely
120
ignored by diff and status
122
* Stores with some compressed texts and some uncompressed texts are now
123
able to be used. (John A Meinel)
125
* Fix for bzr pull failing sometimes under windows
127
* Fix for sftp transport under windows when using interactive auth
129
* Show files which are both renamed and modified as such in 'bzr
130
status' output. (#4503, Daniel Silverstone)
132
* Make annotate cope better with revisions committed without a valid
133
email address. (Marien Zwart)
135
* Fix representation of tab characters in commit messages. (Harald
138
* List of plugin directories in BZR_PLUGIN_PATH environment variable is
139
now parsed properly under Windows. (Alexander Belchenko)
141
* Show number of revisions pushed/pulled/merged. (Robey Pointer)
143
* Keep a cached copy of the basis inventory to speed up operations
144
that need to refer to it. (Johan Rydberg, Martin Pool)
146
* Fix bugs in bzr status display of non-ascii characters. (Martin
151
* Fix selftest asking for passwords when there are no SFTP keys.
152
(Robey Pointer, Jelmer Vernooij)
154
* Fix selftest run with 'python -O'. (Martin Pool)
156
* Fix HTTP tests under Windows. (John Arbash Meinel)
158
* Make tests work even if HOME is not set (Aaron Bentley)
160
* Updated build_tree to use fixed line-endings for tests which read
161
the file cotents and compare. Make some tests use this to pass under
162
Windows. (John Arbash Meinel)
164
* Skip stat and symlink tests under Windows. (Alexander Belchenko)
166
* Delay in selftest/testhashcash is now issued under win32 and Cygwin.
169
* Use terminal width to align verbose test output. (Martin Pool)
171
* Blackbox tests are maintained within the bzrlib.tests.blackbox directory.
172
If adding a new test script please add that to
173
bzrlib.tests.blackbox.__init__. (Robert Collins)
175
* Much better error message if one of the test suites can't be
176
imported. (Martin Pool)
178
* Make check now runs the test suite twice - once with the default locale,
179
and once with all locales forced to C, to expose bugs. This is not
180
trivially done within python, so for now its only triggered by running
181
Make check. Integrators and packagers who wish to check for full
182
platform support should run 'make check' to test the source.
185
* Tests can now run TestSkipped if they can't execute for any reason.
186
(Martin Pool) (NB: TestSkipped should only be raised for correctable
187
reasons - see the wiki spec ImprovingBzrTestSuite).
191
* WorkingTree.pull has been split across Branch and WorkingTree,
192
to allow Branch only pulls. (Robert Collins)
194
* commands.display_command now returns the result of the decorated
195
function. (Robert Collins)
197
* LocationConfig now has a set_user_option(key, value) call to save
198
a setting in its matching location section (a new one is created
199
if needed). (Robert Collins)
201
* Branch has two new methods, get_push_location and set_push_location
202
to respectively, get and set the push location. (Robert Collins)
204
* commands.register_command now takes an optional flag to signal that
205
the registrant is planning to decorate an existing command. When
206
given multiple plugins registering a command is not an error, and
207
the original command class (whether built in or a plugin based one) is
208
returned to the caller. There is a new error 'MustUseDecorated' for
209
signalling when a wrapping command should switch to the original
210
version. (Robert Collins)
212
* Some option parsing errors will raise 'BzrOptionError', allowing
213
granular detection for decorating commands. (Robert Collins).
215
* Branch.read_working_inventory has moved to
216
WorkingTree.read_working_inventory. This necessitated changes to
217
Branch.get_root_id, and a move of Branch.set_inventory to WorkingTree
218
as well. To make it clear that a WorkingTree cannot always be obtained
219
Branch.working_tree() will raise 'errors.NoWorkingTree' if one cannot
220
be obtained. (Robert Collins)
222
* All pending merges operations from Branch are now on WorkingTree.
225
* The follow operations from Branch have moved to WorkingTree:
233
* bzrlib.add.smart_add_branch is now smart_add_tree. (Robert Collins)
235
* New "rio" serialization format, similar to rfc-822. (Martin Pool)
237
* Rename selftests to `bzrlib.tests.test_foo`. (John A Meinel, Martin
240
* bzrlib.plugin.all_plugins has been changed from an attribute to a
241
query method. (Robert Collins)
243
* New options to read only the table-of-contents of a weave.
246
* Raise NoSuchFile when someone tries to add a non-existant file.
249
* Simplify handling of DivergedBranches in cmd_pull().
253
* Branch.controlfile* logic has moved to lockablefiles.LockableFiles, which
254
is exposed as Branch().control_files. Also this has been altered with the
255
controlfile pre/suffix replaced by simple method names like 'get' and
256
'put'. (Aaron Bentley, Robert Collins).
262
* pull now takes --verbose to show you what revisions are added or removed
265
* merge now takes a --show-base option to include the base text in
269
* The config files are now read using ConfigObj, so '=' should be used as
270
a separator, not ':'.
273
* New 'bzr commit --strict' option refuses to commit if there are
274
any unknown files in the tree. To commit, make sure all files are
275
either ignored, added, or deleted. (Michael Ellerman)
277
* The config directory is now ~/.bazaar, and there is a single file
278
~/.bazaar/bazaar.conf storing email, editor and other preferences.
281
* 'bzr add' no longer takes a --verbose option, and a --quiet option
282
has been added that suppresses all output.
284
* Improved zsh completion support in contrib/zsh, from Clint
287
* Builtin 'bzr annotate' command, by Martin Pool with improvements from
290
* 'bzr check' now accepts -v for verbose reporting, and checks for
291
ghosts in the branch. (Robert Collins)
293
* New command 're-sign' which will regenerate the gpg signature for
294
a revision. (Robert Collins)
296
* If you set check_signatures=require for a path in
297
~/.bazaar/branches.conf then bzr will invoke your
298
gpg_signing_command (defaults to gpg) and record a digital signature
299
of your commit. (Robert Collins)
301
* New sftp transport, based on Paramiko. (Robey Pointer)
303
* 'bzr pull' now accepts '--clobber' which will discard local changes
304
and make this branch identical to the source branch. (Robert Collins)
306
* Just give a quieter warning if a plugin can't be loaded, and
307
put the details in .bzr.log. (Martin Pool)
309
* 'bzr branch' will now set the branch-name to the last component of the
310
output directory, if one was supplied.
312
* If the option 'post_commit' is set to one (or more) python function
313
names (must be in the bzrlib namespace), then they will be invoked
314
after the commit has completed, with the branch and revision_id as
315
parameters. (Robert Collins)
317
* Merge now has a retcode of 1 when conflicts occur. (Robert Collins)
319
* --merge-type weave is now supported for file contents. Tree-shape
320
changes are still three-way based. (Martin Pool, Aaron Bentley)
322
* 'bzr check' allows the first revision on revision-history to have
323
parents - something that is expected for cheap checkouts, and occurs
324
when conversions from baz do not have all history. (Robert Collins).
326
* 'bzr merge' can now graft unrelated trees together, if your specify
327
0 as a base. (Aaron Bentley)
329
* 'bzr commit branch' and 'bzr commit branch/file1 branch/file2' now work
332
* Add '.sconsign*' to default ignore list. (Alexander Belchenko)
334
* 'bzr merge --reprocess' minimizes conflicts
338
* The 'bzr selftest --pattern' option for has been removed, now
339
test specifiers on the command line can be simple strings, or
340
regexps, or both. (Robert Collins)
342
* Passing -v to selftest will now show the time each test took to
343
complete, which will aid in analysing performance regressions and
344
related questions. (Robert Collins)
346
* 'bzr selftest' runs all tests, even if one fails, unless '--one'
347
is given. (Martin Pool)
349
* There is a new method for TestCaseInTempDir, assertFileEqual, which
350
will check that a given content is equal to the content of the named
351
file. (Robert Collins)
353
* Fix test suite's habit of leaving many temporary log files in $TMPDIR.
358
* New 'testament' command and concept for making gpg-signatures
359
of revisions that are not tied to a particular internal
360
representation. (Martin Pool).
362
* Per-revision properties ('revprops') as key-value associated
363
strings on each revision created when the revision is committed.
364
Intended mainly for the use of external tools. (Martin Pool).
366
* Config options have moved from bzrlib.osutils to bzrlib.config.
369
* Improved command line option definitions allowing explanations
370
for individual options, among other things. Contributed by
373
* Config options have moved from bzrlib.osutils to bzrlib.config.
374
Configuration is now done via the config.Config interface:
375
Depending on whether you have a Branch, a Location or no information
376
available, construct a *Config, and use its signature_checking,
377
username and user_email methods. (Robert Collins)
379
* Plugins are now loaded under bzrlib.plugins, not bzrlib.plugin, and
380
they are made available for other plugins to use. You should not
381
import other plugins during the __init__ of your plugin though, as
382
no ordering is guaranteed, and the plugins directory is not on the
383
python path. (Robert Collins)
385
* Branch.relpath has been moved to WorkingTree.relpath. WorkingTree no
386
no longer takes an inventory, rather it takes an option branch
387
parameter, and if None is given will open the branch at basedir
388
implicitly. (Robert Collins)
390
* Cleaner exception structure and error reporting. Suggested by
391
Scott James Remnant. (Martin Pool)
393
* Branch.remove has been moved to WorkingTree, which has also gained
394
lock_read, lock_write and unlock methods for convenience. (Robert
397
* Two decorators, needs_read_lock and needs_write_lock have been added
398
to the branch module. Use these to cause a function to run in a
399
read or write lock respectively. (Robert Collins)
401
* Branch.open_containing now returns a tuple (Branch, relative-path),
402
which allows direct access to the common case of 'get me this file
403
from its branch'. (Robert Collins)
405
* Transports can register using register_lazy_transport, and they
406
will be loaded when first used. (Martin Pool)
408
* 'pull' has been factored out of the command as WorkingTree.pull().
409
A new option to WorkingTree.pull has been added, clobber, which will
410
ignore diverged history and pull anyway.
413
* config.Config has a 'get_user_option' call that accepts an option name.
414
This will be looked up in branches.conf and bazaar.conf as normal.
415
It is intended that this be used by plugins to support options -
416
options of built in programs should have specific methods on the config.
419
* merge.merge_inner now has tempdir as an optional parameter. (Robert
422
* Tree.kind is not recorded at the top level of the hierarchy, as it was
423
missing on EmptyTree, leading to a bug with merge on EmptyTrees.
426
* WorkingTree.__del__ has been removed, it was non deterministic and not
427
doing what it was intended to. See WorkingTree.__init__ for a comment
428
about future directions. (Robert Collins/Martin Pool)
430
* bzrlib.transport.http has been modified so that only 404 urllib errors
431
are returned as NoSuchFile. Other exceptions will propogate as normal.
432
This allows debuging of actual errors. (Robert Collins)
434
* bzrlib.transport.Transport now accepts *ONLY* url escaped relative paths
435
to apis like 'put', 'get' and 'has'. This is to provide consistent
436
behaviour - it operates on url's only. (Robert Collins)
438
* Transports can register using register_lazy_transport, and they
439
will be loaded when first used. (Martin Pool)
441
* 'merge_flex' no longer calls conflict_handler.finalize(), instead that
442
is called by merge_inner. This is so that the conflict count can be
443
retrieved (and potentially manipulated) before returning to the caller
444
of merge_inner. Likewise 'merge' now returns the conflict count to the
445
caller. (Robert Collins)
447
* 'revision.revision_graph can handle having only partial history for
448
a revision - that is no revisions in the graph with no parents.
451
* New builtins.branch_files uses the standard file_list rules to produce
452
a branch and a list of paths, relative to that branch (Aaron Bentley)
454
* New TestCase.addCleanup facility.
456
* New bzrlib.version_info tuple (similar to sys.version_info), which can
457
be used by programs importing bzrlib.
461
* Better handling of branches in directories with non-ascii names.
462
(Joel Rosdahl, Panagiotis Papadakos)
464
* Upgrades of trees with no commits will not fail due to accessing
465
[-1] in the revision-history. (Andres Salomon)
472
* Fix problem in pulling over http from machines that do not
473
allow directories to be listed.
475
* Avoid harmless warning about invalid hash cache after
476
upgrading branch format.
480
* Avoid some unnecessary http operations in branch and pull.
487
* 'bzr branch' over http initially gives a very high estimate
488
of completion time but it should fall as the first few
489
revisions are pulled in. branch is still slow on
490
high-latency connections.
494
* bzr-man.py has been updated to work again. Contributed by
497
* Locking is now done with fcntl.lockf which works with NFS
498
file systems. Contributed by Harald Meland.
500
* When a merge encounters a file that has been deleted on
501
one side and modified on the other, the old contents are
502
written out to foo.BASE and foo.SIDE, where SIDE is this
503
or OTHER. Contributed by Aaron Bentley.
505
* Export was choosing incorrect file paths for the content of
506
the tarball, this has been fixed by Aaron Bentley.
508
* Commit will no longer commit without a log message, an
509
error is returned instead. Contributed by Jelmer Vernooij.
511
* If you commit a specific file in a sub directory, any of its
512
parent directories that are added but not listed will be
513
automatically included. Suggested by Michael Ellerman.
515
* bzr commit and upgrade did not correctly record new revisions
516
for files with only a change to their executable status.
517
bzr will correct this when it encounters it. Fixed by
520
* HTTP tests now force off the use of http_proxy for the duration.
521
Contributed by Gustavo Niemeyer.
523
* Fix problems in merging weave-based branches that have
524
different partial views of history.
526
* Symlink support: working with symlinks when not in the root of a
527
bzr tree was broken, patch from Scott James Remnant.
532
* 'branch' now accepts a --basis parameter which will take advantage
533
of local history when making a new branch. This allows faster
534
branching of remote branches. Contributed by Aaron Bentley.
536
* New tree format based on weave files, called version 5.
537
Existing branches can be upgraded to this format using
540
* Symlinks are now versionable. Initial patch by
541
Erik Toubro Nielsen, updated to head by Robert Collins.
543
* Executable bits are tracked on files. Patch from Gustavo
546
* 'bzr status' now shows unknown files inside a selected directory.
547
Patch from Heikki Paajanen.
549
* Merge conflicts are recorded in .bzr. Two new commands 'conflicts'
550
and 'resolve' have needed added, which list and remove those
551
merge conflicts respectively. A conflicted tree cannot be committed
552
in. Contributed by Aaron Bentley.
554
* 'rm' is now an alias for 'remove'.
556
* Stores now split out their content in a single byte prefixed hash,
557
dropping the density of files per directory by 256. Contributed by
560
* 'bzr diff -r branch:URL' will now perform a diff between two branches.
561
Contributed by Robert Collins.
563
* 'bzr log' with the default formatter will show merged revisions,
564
indented to the right. Initial implementation contributed by Gustavo
565
Niemeyer, made incremental by Robert Collins.
570
* Test case failures have the exception printed after the log
571
for your viewing pleasure.
573
* InventoryEntry is now an abstract base class, use one of the
574
concrete InventoryDirectory etc classes instead.
576
* Branch raises an UnsupportedFormatError when it detects a
577
bzr branch it cannot understand. This allows for precise
578
handling of such circumstances.
583
* Removed testsweet module so that tests can be run after
584
bzr installed by 'bzr selftest'.
586
* 'bzr selftest' command-line arguments can now be partial ids
587
of tests to run, e.g. 'bzr selftest test_weave'
594
* Fixed "branch -r" option.
596
* Fix remote access to branches containing non-compressed history.
599
* Better reliability of http server tests. (John Arbash-Meinel)
601
* Merge graph maximum distance calculation fix. (Aaron Bentley)
603
* Various minor bug in windows support have been fixed, largely in the
604
test suite. Contributed by Alexander Belchenko.
608
* Status now accepts a -r argument to give status between chosen
609
revisions. Contributed by Heikki Paajanen.
611
* Revision arguments no longer use +/-/= to control ranges, instead
612
there is a 'before' namespace, which limits the successive namespace.
613
For example '$ bzr log -r date:yesterday..before:date:today' will
614
select everything from yesterday and before today. Contributed by
617
* There is now a bzr.bat file created by distutils when building on
618
Windows. Contributed by Alexander Belchenko.
622
* Removed uuid() as it was unused.
624
* Improved 'fetch' code for pulling revisions from one branch into
625
another (used by pull, merged, etc.)
632
* Adding a file whose parent directory is not versioned will
633
implicitly add the parent, and so on up to the root. This means
634
you should never need to explictly add a directory, they'll just
635
get added when you add a file in the directory. Contributed by
638
* Ignore .DS_Store (contains Mac metadata) by default. Patch from
641
* If you set BZR_EDITOR in the environment, it is checked in
642
preference to EDITOR and the config file for the interactive commit
643
editing program. Related to this is a bugfix where a missing program
644
set in EDITOR would cause editing to fail, now the fallback program
645
for the operating system is still tried.
647
* Files that are not directories/symlinks/regular files will no longer
648
cause bzr to fail, it will just ignore them by default. You cannot add
649
them to the tree though - they are not versionable.
654
* Refactor xml packing/unpacking.
658
* Fixed 'bzr mv' by Ollie Rutherfurd.
660
* Fixed strange error when trying to access a nonexistent http
663
* Make sure that the hashcache gets written out if it can't be
669
* Various Windows fixes from Ollie Rutherfurd.
671
* Quieten warnings about locking; patch from Matt Lavin.
678
* ``bzr shell-complete`` command contributed by Clint Adams to
679
help with intelligent shell completion.
681
* New expert command ``bzr find-merge-base`` for debugging merges.
686
* Much better merge support.
688
* merge3 conflicts are now reported with markers like '<<<<<<<'
689
(seven characters) which is the same as CVS and pleases things
695
* ``bzr upgrade`` no longer fails when trying to fix trees that
696
mention revisions that are not present.
698
* Fixed bugs in listing plugins from ``bzr plugins``.
700
* Fix case of $EDITOR containing options for the editor.
702
* Fix log -r refusing to show the last revision.
703
(Patch from Goffredo Baroncelli.)
708
* ``bzr log --show-ids`` shows the revision ids of all parents.
710
* Externally provided commands on your $BZRPATH no longer need
711
to recognize --bzr-usage to work properly, and can just handle
717
* Changed trace messages to go through the standard logging
718
framework, so that they can more easily be redirected by
727
* Python plugins, automatically loaded from the directories on
728
BZR_PLUGIN_PATH or ~/.bzr.conf/plugins by default.
730
* New 'bzr mkdir' command.
732
* Commit mesage is fetched from an editor if not given on the
733
command line; patch from Torsten Marek.
735
* ``bzr log -m FOO`` displays commits whose message matches regexp
738
* ``bzr add`` with no arguments adds everything under the current directory.
740
* ``bzr mv`` does move or rename depending on its arguments, like
743
* ``bzr missing`` command shows a summary of the differences
744
between two trees. (Merged from John Arbash-Meinel.)
746
* An email address for commits to a particular tree can be
747
specified by putting it into .bzr/email within a branch. (Based
748
on a patch from Heikki Paajanen.)
753
* Faster working tree operations.
758
* 3rd-party modules shipped with bzr are copied within the bzrlib
759
python package, so that they can be installed by the setup
760
script without clashing with anything already existing on the
761
system. (Contributed by Gustavo Niemeyer.)
763
* Moved plugins directory to bzrlib/, so that there's a standard
764
plugin directory which is not only installed with bzr itself but
765
is also available when using bzr from the development tree.
766
BZR_PLUGIN_PATH and DEFAULT_PLUGIN_PATH are then added to the
767
standard plugins directory.
769
* When exporting to a tarball with ``bzr export --format tgz``, put
770
everything under a top directory rather than dumping it into the
771
current directory. This can be overridden with the ``--root``
772
option. Patch from William Dodé and John Meinel.
774
* New ``bzr upgrade`` command to upgrade the format of a branch,
775
replacing ``bzr check --update``.
777
* Files within store directories are no longer marked readonly on
780
* Changed ``bzr log`` output to a more compact form suggested by
781
John A Meinel. Old format is available with the ``--long`` or
782
``-l`` option, patched by William Dodé.
784
* By default the commit command refuses to record a revision with
785
no changes unless the ``--unchanged`` option is given.
787
* The ``--no-plugins``, ``--profile`` and ``--builtin`` command
788
line options must come before the command name because they
789
affect what commands are available; all other options must come
790
after the command name because their interpretation depends on
793
* ``branch`` and ``clone`` added as aliases for ``branch``.
795
* Default log format is back to the long format; the compact one
796
is available with ``--short``.
801
* Fix bugs in committing only selected files or within a subdirectory.
808
* ``bzr`` with no command now shows help rather than giving an
809
error. Suggested by Michael Ellerman.
811
* ``bzr status`` output format changed, because svn-style output
812
doesn't really match the model of bzr. Now files are grouped by
813
status and can be shown with their IDs. ``bzr status --all``
814
shows all versioned files and unknown files but not ignored files.
816
* ``bzr log`` runs from most-recent to least-recent, the reverse
817
of the previous order. The previous behaviour can be obtained
818
with the ``--forward`` option.
820
* ``bzr inventory`` by default shows only filenames, and also ids
821
if ``--show-ids`` is given, in which case the id is the second
827
* New 'bzr whoami --email' option shows only the email component
828
of the user identification, from Jo Vermeulen.
830
* New ``bzr ignore PATTERN`` command.
832
* Nicer error message for broken pipe, interrupt and similar
833
conditions that don't indicate an internal error.
835
* Add ``.*.sw[nop] .git .*.tmp *,v`` to default ignore patterns.
837
* Per-branch locks keyed on ``.bzr/branch-lock``, available in
838
either read or write mode.
840
* New option ``bzr log --show-ids`` shows revision and file ids.
842
* New usage ``bzr log FILENAME`` shows only revisions that
845
* Changed format for describing changes in ``bzr log -v``.
847
* New option ``bzr commit --file`` to take a message from a file,
848
suggested by LarstiQ.
850
* New syntax ``bzr status [FILE...]`` contributed by Bartosz
851
Oler. File may be in a branch other than the working directory.
853
* ``bzr log`` and ``bzr root`` can be given an http URL instead of
856
* Commands can now be defined by external programs or scripts
857
in a directory on $BZRPATH.
859
* New "stat cache" avoids reading the contents of files if they
860
haven't changed since the previous time.
862
* If the Python interpreter is too old, try to find a better one
863
or give an error. Based on a patch from Fredrik Lundh.
865
* New optional parameter ``bzr info [BRANCH]``.
867
* New form ``bzr commit SELECTED`` to commit only selected files.
869
* New form ``bzr log -r FROM:TO`` shows changes in selected
870
range; contributed by John A Meinel.
872
* New option ``bzr diff --diff-options 'OPTS'`` allows passing
873
options through to an external GNU diff.
875
* New option ``bzr add --no-recurse`` to add a directory but not
878
* ``bzr --version`` now shows more information if bzr is being run
884
* Fixed diff format so that added and removed files will be
885
handled properly by patch. Fix from Lalo Martins.
887
* Various fixes for files whose names contain spaces or other
893
* Converted black-box test suites from Bourne shell into Python;
894
now run using ``./testbzr``. Various structural improvements to
897
* testbzr by default runs the version of bzr found in the same
898
directory as the tests, or the one given as the first parameter.
900
* testbzr also runs the internal tests, so the only command
901
required to check is just ``./testbzr``.
903
* testbzr requires python2.4, but can be used to test bzr running
904
under a different version.
906
* Tests added for many other changes in this release.
911
* Included ElementTree library upgraded to 1.2.6 by Fredrik Lundh.
913
* Refactor command functions into Command objects based on HCT by
916
* Better help messages for many commands.
918
* Expose bzrlib.open_tracefile() to start the tracefile; until
919
this is called trace messages are just discarded.
921
* New internal function find_touching_revisions() and hidden
922
command touching-revisions trace the changes to a given file.
924
* Simpler and faster compare_inventories() function.
926
* bzrlib.open_tracefile() takes a tracefilename parameter.
928
* New AtomicFile class.
930
* New developer commands ``added``, ``modified``.
935
* Cope on Windows on python2.3 by using the weaker random seed.
936
2.4 is now only recommended.
943
* 'bzr diff' optionally takes a list of files to diff. Still a bit
944
basic. Patch from QuantumG.
946
* More default ignore patterns.
948
* New 'bzr log --verbose' shows a list of files changed in the
949
changeset. Patch from Sebastian Cote.
951
* Roll over ~/.bzr.log if it gets too large.
953
* Command abbreviations 'ci', 'st', 'stat', '?' based on a patch
956
* New 'bzr help commands' based on a patch from Denys Duchier.
961
* User email is determined by looking at $BZREMAIL or ~/.bzr.email
962
or $EMAIL. All are decoded by the locale preferred encoding.
963
If none of these are present user@hostname is used. The host's
964
fully-qualified name is not used because that tends to fail when
965
there are DNS problems.
967
* New 'bzr whoami' command instead of username user-email.
972
* Make commit safe for hardlinked bzr trees.
974
* Some Unicode/locale fixes.
976
* Partial workaround for difflib.unified_diff not handling
977
trailing newlines properly.
982
* Allow docstrings for help to be in PEP0257 format. Patch from
985
* More tests in test.sh.
987
* Write profile data to a temporary file not into working
988
directory and delete it when done.
990
* Smaller .bzr.log with process ids.
995
* Fix opening of ~/.bzr.log on Windows. Patch from Andrew
998
* Some improvements in handling paths on Windows, based on a patch
1002
bzr-0.0.3 2005-04-06
1006
* New "directories" internal command lists versioned directories
1009
* Can now say "bzr commit --help".
1011
* New "rename" command to rename one file to a different name
1014
* New "move" command to move one or more files into a different
1017
* New "renames" command lists files renamed since base revision.
1019
* New cat command contributed by janmar.
1023
* .bzr.log is placed in $HOME (not pwd) and is always written in
1024
UTF-8. (Probably not a completely good long-term solution, but
1029
* Workaround for difflib bug in Python 2.3 that causes an
1030
exception when comparing empty files. Reported by Erik Toubro
1035
* Refactored inventory storage to insert a root entry at the top.
1039
* Start of shell-based black-box testing in test.sh.
1046
* Win32 fixes from Steve Brown.
1049
bzr-0.0.2 "black cube" 2005-03-31
1053
* Default ignore list extended (see bzrlib/__init__.py).
1055
* Patterns in .bzrignore are now added to the default ignore list,
1056
rather than replacing it.
1058
* Ignore list isn't reread for every file.
1062
* Reinstate the 'bzr check' command to check invariants of the
1065
* New 'ignored' command lists which files are ignored and why;
1066
'deleted' lists files deleted in the current working tree.
1068
* Performance improvements.
1070
* New global --profile option.
1072
* Ignore patterns like './config.h' now correctly match files in
1073
the root directory only.
1076
bzr-0.0.1 2005-03-26
1080
* More information from info command.
1082
* Can now say "bzr help COMMAND" for more detailed help.
1084
* Less file flushing and faster performance when writing logs and
1085
committing to stores.
1087
* More useful verbose output from some commands.
1091
* Fix inverted display of 'R' and 'M' during 'commit -v'.
1095
* Include a subset of ElementTree-1.2.20040618 to make
1096
installation easier.
1098
* Fix time.localtime call to work with Python 2.3 (the minimum
1102
bzr-0.0.0.69 2005-03-22
1106
* First public release.
1108
* Storage of local versions: init, add, remove, rm, info, log,
added
removed
NEWS
