5
* ``bzr help commands`` output is now shorter (Aaron Bentley)
7
* New connection: ``bzr+http://`` which supports tunnelling the smart
8
protocol over an HTTP connection. If writing is enabled on the bzr
9
server, then you can write over the http connection.
12
* ``bzr`` now uses lazy importing to reduce the startup time. This has
13
a moderate effect on lots of actions, especially ones that have
14
little to do. For example ``bzr rocks`` time is down to 116ms from
15
283ms. (John Arbash Meinel)
17
* New Registry class to provide name-to-object registry-like support,
18
for example for schemes where plugins can register new classes to
19
do certain tasks (e.g. log formatters). Also provides lazy registration
20
to allow modules to be loaded on request. (John Arbash Meinel, Adeodato
25
* ``TestCase.run_bzr``, ``run_bzr_captured``, and ``run_bzr_subprocess``
26
can take a ``working_dir='foo'`` parameter, which will change directory
27
for the command. (John Arbash Meinel)
29
* ``bzrlib.lazy_regex.lazy_compile`` can be used to create a proxy
30
around a regex, which defers compilation until first use.
33
* ``TestCase.run_bzr_subprocess`` defaults to supplying the
34
``--no-plugins`` parameter to ensure test reproducability, and avoid
35
problems with system-wide installed plugins. (John Arbash Meinel)
37
* Newly-initialized trees have unique root ids. (Aaron Bentley)
39
* ``WorkingTree.set_root_id(None)`` is now deprecated. Please
40
pass in inventory.ROOT_ID if you want the default root id value.
41
(Robert Collins, John Arbash Meinel)
43
* New method ``WorkingTree.flush()`` which will write the current memory
44
inventory out to disk. At the same time, read_working_inventory will
45
no longer trash the current tree inventory if it has been modified within
46
the current lock, and the tree will now ``flush()`` automatically on
47
``unlock()``. ``WorkingTree.set_root_id()`` has been updated to take
48
advantage of this functionality. (Robert Collins, John Arbash Meinel)
52
* Don't require ``Content-Type`` in range responses. Assume they are a
53
single range if ``Content-Type`` does not exist.
54
(John Arbash Meinel, #62473)
56
* bzr branch/pull no longer complain about progress bar cleanup when
57
interrupted during fetch. (Aaron Bentley, #54000)
59
* ``WorkingTree.set_parent_trees()`` uses the trees to directly write
60
the basis inventory, rather than going through the repository. This
61
allows us to have 1 inventory read, and 2 inventory writes when
62
committing a new tree. (John Arbash Meinel)
64
* When reverting, files that are not locally modified that do not exist
65
in the target are deleted, not just unversioned (Aaron Bentley)
67
* When trying to acquire a lock, don't fail immediately. Instead, try
68
a few times (up to 1 hour) before timing out. Also, report why the
69
lock is unavailable (John Arbash Meinel, #43521, #49556)
71
* Leave HttpTransportBase daughter classes decides how they
72
implement cloning. (Vincent Ladeuil, #61606)
74
* diff3 does not indicate conflicts on clean merge. (Aaron Bentley)
78
* New test base class TestCaseWithMemoryTransport offers memory-only
79
testing facilities: its not suitable for tests that need to mutate disk
80
state, but most tests should not need that and should be converted to
81
TestCaseWithMemoryTransport. (Robert Collins)
83
* ``TestCase.make_branch_and_memory_tree`` now takes a format
84
option to set the BzrDir, Repository and Branch formats of the
85
created objects. (Robert Collins, John Arbash Meinel)
89
* Smart server transport test failures on windows fixed. (Lukáš Lalinský).
91
bzr 0.11rc2 2006-09-27
95
* Test suite hangs on windows fixed. (Andrew Bennets, Alexander Belchenko).
97
* Commit performance regression fixed. (Aaron Bentley, Robert Collins, John
100
bzr 0.11rc1 2006-09-25
104
* Knit files now wait to create their contents until the first data is
105
added. The old code used to create an empty .knit and a .kndx with just
106
the header. However, this caused a lot of extra round trips over sftp.
107
This can change the time for ``bzr push`` to create a new remote branch
108
from 160s down to 100s. This also affects ``bzr commit`` performance when
109
adding new files, ``bzr commit`` on a new kernel-like tree drops from 50s
110
down to 40s (John Arbash Meinel, #44692)
112
* When an entire subtree has been deleted, commit will now report that
113
just the top of the subtree has been deleted, rather than reporting
114
all the individual items. (Robert Collins)
116
* Commit performs one less XML parse. (Robert Collins)
118
* ``bzr checkout`` now operates on readonly branches as well
119
as readwrite branches. This fixes bug #39542. (Robert Collins)
121
* ``bzr bind`` no longer synchronises history with the master branch.
122
Binding should be followed by an update or push to synchronise the
123
two branches. This is closely related to the fix for bug #39542.
126
* ``bzrlib.lazy_import.lazy_import`` function to create on-demand
127
objects. This allows all imports to stay at the global scope, but
128
modules will not actually be imported if they are not used.
131
* Support bzr:// and bzr+ssh:// urls to work with the new RPC-based
132
transport which will be used with the upcoming high-performance smart
133
server. The new command ``bzr serve`` will invoke bzr in server mode,
134
which processes these requests. (Andrew Bennetts, Robert Collins, Martin
137
* New command ``bzr version-info`` which can be used to get a summary
138
of the current state of the tree. This is especially useful as part
139
of a build commands. See ``doc/version_info.txt`` for more information
144
* 'bzr inventory [FILE...]' allows restricting the file list to a
145
specific set of files. (John Arbash Meinel, #3631)
147
* Don't abort when annotating empty files (John Arbash Meinel, #56814)
149
* Add ``Stanza.to_unicode()`` which can be passed to another Stanza
150
when nesting stanzas. Also, add ``read_stanza_unicode`` to handle when
151
reading a nested Stanza. (John Arbash Meinel)
153
* Transform._set_mode() needs to stat the right file.
154
(John Arbash Meinel, #56549)
156
* Raise WeaveFormatError rather than StopIteration when trying to read
157
an empty Weave file. (John Arbash Meinel, #46871)
159
* Don't access e.code for generic URLErrors, only HTTPErrors have .code.
160
(Vincent Ladeuil, #59835)
162
* Handle boundary="" lines properly to allow access through a Squid proxy.
163
(John Arbash Meinel, #57723)
165
* revert now removes newly-added directories (Aaron Bentley, #54172)
167
* ``bzr upgrade sftp://`` shouldn't fail to upgrade v6 branches if there
168
isn't a working tree. (David Allouche, #40679)
170
* Give nicer error messages when a user supplies an invalid --revision
171
parameter. (John Arbash Meinel, #55420)
173
* Handle when LANG is not recognized by python. Emit a warning, but
174
just revert to using 'ascii'. (John Arbash Meinel, #35392)
176
* Don't use preexec_fn on win32, as it is not supported by subprocess.
179
* Skip specific tests when the dependencies aren't met. This includes
180
some ``setup.py`` tests when ``python-dev`` is not available, and
181
some tests that depend on paramiko. (John Arbash Meinel, Mattheiu Moy)
183
* Fallback to Paramiko properly, if no ``ssh`` executable exists on
184
the system. (Andrew Bennetts, John Arbash Meinel)
186
* ``Branch.bind(other_branch)`` no longer takes a write lock on the
187
other branch, and will not push or pull between the two branches.
188
API users will need to perform a push or pull or update operation if they
189
require branch synchronisation to take place. (Robert Collins, #47344)
191
* When creating a tarball or zipfile export, export unicode names as utf-8
192
paths. This may not work perfectly on all platforms, but has the best
193
chance of working in the common case. (John Arbash Meinel, #56816)
195
* When committing, only files that exist in working tree or basis tree
196
may be specified (Aaron Bentley, #50793)
200
* Fixes to run on Python 2.5 (Brian M. Carlson, Martin Pool, Marien Zwart)
204
* TestCaseInTempDir now creates a separate directory for HOME, rather
205
than having HOME set to the same location as the working directory.
208
* run_bzr_subprocess() can take an optional 'env_changes={}' parameter,
209
which will update os.environ inside the spawned child. It also can
210
take a 'universal_newlines=True', which helps when checking the output
211
of the command. (John Arbash Meinel)
213
* Refactor SFTP vendors to allow easier re-use when ssh is used.
216
* Transport.list_dir() and Transport.iter_files_recursive() should always
217
return urlescaped paths. This is now tested (there were bugs in a few
218
of the transports) (Andrew Bennetts, David Allouche, John Arbash Meinel)
220
* New utility function symbol_versioning.deprecation_string. Returns the
221
formatted string for a callable, deprecation format pair. (Robert Collins)
223
* New TestCase helper applyDeprecated. This allows you to call a callable
224
which is deprecated without it spewing to the screen, just by supplying
225
the deprecation format string issued for it. (Robert Collins)
227
* Transport.append and Transport.put have been deprecated in favor of
228
.append_bytes, .append_file, .put_bytes, and .put_file. This removes the
229
ambiguity in what type of object the functions take.
230
Transport.non_atomic_put_{bytes,file} has also been added. Which works
231
similarly to Transport.append() except for SFTP, it doesn't have a round
232
trip when opening the file. Also, it provides functionality for creating
233
a parent directory when trying to create a file, rather than raise
234
NoSuchFile and forcing the caller to repeat their request.
237
* WorkingTree has a new api ``unversion`` which allow the unversioning of
238
entries by their file id. (Robert Collins)
240
* WorkingTree.pending_merges is deprecated. Please use the get_parent_ids
241
(introduced in 0.10) method instead. (Robert Collins)
243
* WorkingTree has a new lock_tree_write method which locks the branch for
244
read rather than write. This is appropriate for actions which only need
245
the branch data for reference rather than mutation. A new decorator
246
needs_tree_write_lock is provided in the workingtree module. Like the
247
needs_read_lock and needs_write_lock decorators this allows static
248
declaration of the locking requirements of a function to ensure that
249
a lock is taken out for casual scripts. (Robert Collins, #54107)
251
* All WorkingTree methods which write to the tree, but not to the branch
252
have been converted to use ``needs_tree_write_lock`` rather than
253
``needs_write_lock``. Also converted is the revert, conflicts and tree
254
transform modules. This provides a modest performance improvement on
255
metadir style trees, due to the reduce lock-acquisition, and a more
256
significant performance improvement on lightweight checkouts from
257
remote branches, where trivial operations used to pay a significant
258
penalty. It also provides the basis for allowing readonly checkouts.
261
* Special case importing the standard library 'copy' module. This shaves
262
off 40ms of startup time, while retaining compatibility. See:
263
``bzrlib/inspect_for_copy.py`` for more details. (John Arbash Meinel)
265
* WorkingTree has a new parent class MutableTree which represents the
266
specialisations of Tree which are able to be altered. (Robert Collins)
268
* New methods mkdir and put_file_bytes_non_atomic on MutableTree that
269
mutate the tree and its contents. (Robert Collins)
271
* Transport behaviour at the root of the URL is now defined and tested.
272
(Andrew Bennetts, Robert Collins)
276
* New test helper classs MemoryTree. This is typically accessed via
277
``self.make_branch_and_memory_tree()`` in test cases. (Robert Collins)
279
* Add start_bzr_subprocess and stop_bzr_subprocess to allow test code to
280
continue running concurrently with a subprocess of bzr. (Andrew Bennetts,
283
* Add a new method ``Transport.get_smart_client()``. This is provided to
284
allow upgrades to a richer interface than the VFS one provided by
285
Transport. (Andrew Bennetts, Martin Pool)
290
* 'merge' now takes --uncommitted, to apply uncommitted changes from a
291
tree. (Aaron Bentley)
293
* 'bzr add --file-ids-from' can be used to specify another path to use
294
for creating file ids, rather than generating all new ones. Internally,
295
the 'action' passed to smart_add_tree() can return file_ids that
296
will be used, rather than having bzrlib generate new ones.
297
(John Arbash Meinel, #55781)
299
* ``bzr selftest --benchmark`` now allows a ``--cache-dir`` parameter.
300
This will cache some of the intermediate trees, and decrease the
301
setup time for benchmark tests. (John Arbash Meinel)
303
* Inverse forms are provided for all boolean options. For example,
304
--strict has --no-strict, --no-recurse has --recurse (Aaron Bentley)
306
* Serialize out Inventories directly, rather than using ElementTree.
307
Writing out a kernel sized inventory drops from 2s down to ~350ms.
308
(Robert Collins, John Arbash Meinel)
312
* Help diffutils 2.8.4 get along with binary tests (Marien Zwart: #57614)
314
* Change LockDir so that if the lock directory doesn't exist when
315
lock_write() is called, an attempt will be made to create it.
316
(John Arbash Meinel, #56974)
318
* ``bzr uncommit`` preserves pending merges. (John Arbash Meinel, #57660)
320
* Active FTP transport now works as intended. (ghozzy, #56472)
322
* Really fix mutter() so that it won't ever raise a UnicodeError.
323
It means it is possible for ~/.bzr.log to contain non UTF-8 characters.
324
But it is a debugging log, not a real user file.
325
(John Arbash Meinel, #56947, #53880)
327
* Change Command handle to allow Unicode command and options.
328
At present we cannot register Unicode command names, so we will get
329
BzrCommandError('unknown command'), or BzrCommandError('unknown option')
330
But that is better than a UnicodeError + a traceback.
331
(John Arbash Meinel, #57123)
333
* Handle TZ=UTC properly when reading/writing revisions.
334
(John Arbash Meinel, #55783, #56290)
336
* Use GPG_TTY to allow gpg --cl to work with gpg-agent in a pipeline,
337
(passing text to sign in on stdin). (John Arbash Meinel, #54468)
339
* External diff does the right thing for binaries even in foreign
340
languages. (John Arbash Meinel, #56307)
342
* Testament handles more cases when content is unicode. Specific bug was
343
in handling of revision properties. (John Arbash Meinel, Holger Krekel,
346
* The bzr selftest was failing on installed versions due to a bug in a new
347
test helper. (John Arbash Meinel, Robert Collins, #58057)
351
* ``bzrlib.cache_utf8`` contains ``encode()`` and ``decode()`` functions
352
which can be used to cache the conversion between utf8 and Unicode.
353
Especially helpful for some of the knit annotation code, which has to
354
convert revision ids to utf8 to annotate lines in storage.
357
* ``setup.py`` now searches the filesystem to find all packages which
358
need to be installed. This should help make the life of packagers
359
easier. (John Arbash Meinel)
365
* The hard-coded built-in ignore rules have been removed. There are
366
now two rulesets which are enforced. A user global one in
367
~/.bazaar/ignore which will apply to every tree, and the tree
368
specific one '.bzrignore'.
369
~/.bazaar/ignore will be created if it does not exist, but with
370
a more conservative list than the old default.
371
This fixes bugs with default rules being enforced no matter what.
372
The old list of ignore rules from bzr is available by
373
running 'bzr ignore --old-default-rules'.
374
(Robert Collins, Martin Pool, John Arbash Meinel)
376
* 'branches.conf' has been changed to 'locations.conf', since it can apply
377
to more locations than just branch locations.
382
* The revision specifier "revno:" is extended to accept the syntax
383
revno:N:branch. For example,
384
revno:42:http://bazaar-vcs.org/bzr/bzr.dev/ means revision 42 in
385
bzr.dev. (Matthieu Moy)
387
* Tests updates to ensure proper URL handling, UNICODE support, and
388
proper printing when the user's terminal encoding cannot display
389
the path of a file that has been versioned.
390
``bzr branch`` can take a target URL rather than only a local directory.
391
Branch.get_parent()/set_parent() now save a relative path if possible,
392
and normalize the parent based on root, allowing access across
393
different transports. (John Arbash Meinel, Wouter van Heyst, Martin Pool)
394
(Malone #48906, #42699, #40675, #5281, #3980, #36363, #43689,
397
* On Unix, detect terminal width using an ioctl not just $COLUMNS.
398
Use terminal width for single-line logs from ``bzr log --line`` and
399
pending-merge display. (Robert Widhopf-Fenk, Gustavo Niemeyer)
402
* On Windows, detect terminal width using GetConsoleScreenBufferInfo.
403
(Alexander Belchenko)
405
* Speedup improvement for 'date:'-revision search. (Guillaume Pinot).
407
* Show the correct number of revisions pushed when pushing a new branch.
410
* 'bzr selftest' now shows a progress bar with the number of tests, and
411
progress made. 'make check' shows tests in -v mode, to be more useful
412
for the PQM status window. (Robert Collins).
413
When using a progress bar, failed tests are printed out, rather than
414
being overwritten by the progress bar until the suite finishes.
417
* 'bzr selftest --benchmark' will run a new benchmarking selftest.
418
'bzr selftest --benchmark --lsprof-timed' will use lsprofile to generate
419
profile data for the individual profiled calls, allowing for fine
420
grained analysis of performance.
421
(Robert Collins, Martin Pool).
423
* 'bzr commit' shows a progress bar. This is useful for commits over sftp
424
where commit can take an appreciable time. (Robert Collins)
426
* 'bzr add' is now less verbose in telling you what ignore globs were
427
matched by files being ignored. Instead it just tells you how many
428
were ignored (because you might reasonably be expecting none to be
429
ignored). 'bzr add -v' is unchanged and will report every ignored
430
file. (Robert Collins).
432
* ftp now has a test server if medusa is installed. As part of testing,
433
ftp support has been improved, including support for supplying a
434
non-standard port. (John Arbash Meinel).
436
* 'bzr log --line' shows the revision number, and uses only the
437
first line of the log message (#5162, Alexander Belchenko;
440
* 'bzr status' has had the --all option removed. The 'bzr ls' command
441
should be used to retrieve all versioned files. (Robert Collins)
443
* 'bzr bundle OTHER/BRANCH' will create a bundle which can be sent
444
over email, and applied on the other end, while maintaining ancestry.
445
This bundle can be applied with either 'bzr merge' or 'bzr pull',
446
the same way you would apply another branch.
447
(John Arbash Meinel, Aaron Bentley)
449
* 'bzr whoami' can now be used to set your identity from the command line,
450
for a branch or globally. (Robey Pointer)
452
* 'bzr checkout' now aliased to 'bzr co', and 'bzr annotate' to 'bzr ann'.
455
* 'bzr revert DIRECTORY' now reverts the contents of the directory as well.
458
* 'bzr get sftp://foo' gives a better error when paramiko is not present.
459
Also updates things like 'http+pycurl://' if pycurl is not present.
460
(John Arbash Meinel) (Malone #47821, #52204)
462
* New env variable BZR_PROGRESS_BAR, sets the default progress bar type.
463
Can be set to 'none' or 'dummy' to disable the progress bar, 'dots' or
464
'tty' to create the respective type. (John Arbash Meinel, #42197, #51107)
466
* Improve the help text for 'bzr diff' to explain what various options do.
467
(John Arbash Meinel, #6391)
469
* 'bzr uncommit -r 10' now uncommits revisions 11.. rather than uncommitting
470
revision 10. This makes -r10 more in line with what other commands do.
471
'bzr uncommit' also now saves the pending merges of the revisions that
472
were removed. So it is safe to uncommit after a merge, fix something,
473
and commit again. (John Arbash Meinel, #32526, #31426)
475
* 'bzr init' now also works on remote locations.
476
(Wouter van Heyst, #48904)
478
* HTTP support has been updated. When using pycurl we now support
479
connection keep-alive, which reduces dns requests and round trips.
480
And for both urllib and pycurl we support multi-range requests,
481
which decreases the number of round-trips. Performance results for
482
``bzr branch http://bazaar-vcs.org/bzr/bzr.dev/`` indicate
483
http branching is now 2-3x faster, and ``bzr pull`` in an existing
484
branch is as much as 4x faster.
485
(Michael Ellerman, Johan Rydberg, John Arbash Meinel, #46768)
487
* Performance improvements for sftp. Branching and pulling are now up to
488
2x faster. Utilize paramiko.readv() support for async requests if it
489
is available (paramiko > 1.6) (John Arbash Meinel)
493
* Fix shadowed definition of TestLocationConfig that caused some
494
tests not to run. (#32587, Erik Bågfors, Michael Ellerman,
497
* Fix unnecessary requirement of sign-my-commits that it be run from
498
a working directory. (Martin Pool, Robert Collins)
500
* 'bzr push location' will only remember the push location if it succeeds
501
in connecting to the remote location. (#49742, John Arbash Meinel)
503
* 'bzr revert' no longer toggles the executable bit on win32
504
(#45010, John Arbash Meinel)
506
* Handle broken pipe under win32 correctly. (John Arbash Meinel)
508
* sftp tests now work correctly on win32 if you have a newer paramiko
511
* Cleanup win32 test suite, and general cleanup of places where
512
file handles were being held open. (John Arbash Meinel)
514
* When specifying filenames for 'diff -r x..y', the name of the file in the
515
working directory can be used, even if its name is different in both x
518
* File-ids containing single- or double-quotes are handled correctly by
519
push. (#52227, Aaron Bentley)
521
* Normalize unicode filenames to ensure cross-platform consistency.
522
(John Arbash Meinel, #43689)
524
* The argument parser can now handle '-' as an argument. Currently
525
no code interprets it specially (it is mostly handled as a file named
526
'-'). But plugins, and future operations can use it.
527
(John Arbash meinel, #50984)
529
* Bundles can properly read binary files with a plain '\r' in them.
530
(John Arbash Meinel, #51927)
532
* Tuning iter_entries() to be more efficient (John Arbash Meinel, #5444)
534
* Lots of win32 fixes (the test suite passes again).
535
(John Arbash Meinel, #50155)
537
* Handle openbsd returning None for sys.getfilesystemencoding() (#41183)
539
* Support ftp APPE (append) to allow Knits to be used over ftp (#42592)
541
* Removals are only committed if they match the filespec (or if there is
542
no filespec). (#46635, Aaron Bentley)
544
* smart-add recurses through all supplied directories
545
(John Arbash Meinel, #52578)
547
* Make the bundle reader extra lines before and after the bundle text.
548
This allows you to parse an email with the bundle inline.
549
(John Arbash Meinel, #49182)
551
* Change the file id generator to squash a little bit more. Helps when
552
working with long filenames on windows. (Also helps for unicode filenames
553
not generating hidden files). (John Arbash Meinel, #43801)
555
* Restore terminal mode on C-c while reading sftp password. (#48923,
556
Nicholas Allen, Martin Pool)
558
* Timestamps are rounded to 1ms, and revision entries can be recreated
559
exactly. (John Arbash Meinel, Jamie Wilkinson, #40693)
561
* Branch.base has changed to a URL, but ~/.bazaar/locations.conf should
562
use local paths, since it is user visible (John Arbash Meinel, #53653)
564
* ``bzr status foo`` when foo was unversioned used to cause a full delta
565
to be generated (John Arbash Meinel, #53638)
567
* When reading revision properties, an empty value should be considered
568
the empty string, not None (John Arbash Meinel, #47782)
570
* ``bzr diff --diff-options`` can now handle binary files being changed.
571
Also, the output is consistent when --diff-options is not supplied.
572
(John Arbash Meinel, #54651, #52930)
574
* Use the right suffixes for loading plugins (John Arbash Meinel, #51810)
576
* Fix Branch.get_parent() to handle the case when the parent is not
577
accessible (John Arbash Meinel, #52976)
581
* Combine the ignore rules into a single regex rather than looping over
582
them to reduce the threshold where N^2 behaviour occurs in operations
583
like status. (Jan Hudec, Robert Collins).
585
* Appending to bzrlib.DEFAULT_IGNORE is now deprecated. Instead, use
586
one of the add functions in bzrlib.ignores. (John Arbash Meinel)
588
* 'bzr push' should only push the ancestry of the current revision, not
589
all of the history in the repository. This is especially important for
590
shared repositories. (John Arbash Meinel)
592
* bzrlib.delta.compare_trees now iterates in alphabetically sorted order,
593
rather than randomly walking the inventories. (John Arbash Meinel)
595
* Doctests are now run in temporary directories which are cleaned up when
596
they finish, rather than using special ScratchDir/ScratchBranch objects.
599
* Split ``check`` into separate methods on the branch and on the repository,
600
so that it can be specialized in ways that are useful or efficient for
601
different formats. (Martin Pool, Robert Collins)
603
* Deprecate Repository.all_revision_ids; most methods don't really need
604
the global revision graph but only that part leading up to a particular
605
revision. (Martin Pool, Robert Collins)
607
* Add a BzrDirFormat control_formats list which allows for control formats
608
that do not use '.bzr' to store their data - i.e. '.svn', '.hg' etc.
609
(Robert Collins, Jelmer Vernooij).
611
* bzrlib.diff.external_diff can be redirected to any file-like object.
612
Uses subprocess instead of spawnvp.
613
(#4047, #48914, James Henstridge, John Arbash Meinel)
615
* New command line option '--profile-imports', which will install a custom
616
importer to log time to import modules and regex compilation time to
617
sys.stderr (John Arbash Meinel)
619
* 'EmptyTree' is now deprecated, please use repository.revision_tree(None)
620
instead. (Robert Collins)
622
* "RevisionTree" is now in bzrlib/revisiontree.py. (Robert Collins)
628
* setup.py failed to install launchpad plugin. (Martin Pool)
634
* Fix failure to commit a merge in a checkout. (Martin Pool,
635
Robert Collins, Erik Bågfors, #43959)
637
* Nicer messages from 'commit' in the case of renames, and correct
638
messages when a merge has occured. (Robert Collins, Martin Pool)
640
* Separate functionality from assert statements as they are skipped in
641
optimized mode of python. Add the same check to pending merges.
642
(#44443, Olaf Conradi)
646
* Do not show the None revision in output of bzr ancestry. (Olaf Conradi)
648
* Add info on standalone branches without a working tree.
649
(#44155, Olaf Conradi)
651
* Fix bug in knits when raising InvalidRevisionId. (#44284, Olaf Conradi)
655
* Make editor invocation comply with Debian Policy. First check
656
environment variables VISUAL and EDITOR, then try editor from
657
alternatives system. If that all fails, fall back to the pre-defined
658
list of editors. (#42904, Olaf Conradi)
662
* New 'register-branch' command registers a public branch into
663
Launchpad.net, where it can be associated with bugs, etc.
664
(Martin Pool, Bjorn Tillenius, Robert Collins)
668
* New public api in InventoryEntry - 'describe_change(old, new)' which
669
provides a human description of the changes between two old and
670
new. (Robert Collins, Martin Pool)
674
* Fix test case for bzr info in upgrading a standalone branch to metadir,
675
uses bzrlib api now. (Olaf Conradi)
679
NOTES WHEN UPGRADING:
681
Release 0.8 of bzr introduces a new format for history storage, called
682
'knit', as an evolution of to the 'weave' format used in 0.7. Local
683
and remote operations are faster using knits than weaves. Several
684
operations including 'init', 'init-repo', and 'upgrade' take a
685
--format option that controls this. Branching from an existing branch
686
will keep the same format.
688
It is possible to merge, pull and push between branches of different
689
formats but this is slower than moving data between homogenous
690
branches. It is therefore recommended (but not required) that you
691
upgrade all branches for a project at the same time. Information on
692
formats is shown by 'bzr info'.
694
bzr 0.8 now allows creation of 'repositories', which hold the history
695
of files and revisions for several branches. Previously bzr kept all
696
the history for a branch within the .bzr directory at the root of the
697
branch, and this is still the default. To create a repository, use
698
the new 'bzr init-repo' command. Branches exist as directories under
699
the repository and contain just a small amount of information
700
indicating the current revision of the branch.
702
bzr 0.8 also supports 'checkouts', which are similar to in cvs and
703
subversion. Checkouts are associated with a branch (optionally in a
704
repository), which contains all the historical information. The
705
result is that a checkout can be deleted without losing any
706
already-committed revisions. A new 'update' command is also available.
708
Repositories and checkouts are not supported with the 0.7 storage
709
format. To use them you must upgrad to either knits, or to the
710
'metaweave' format, which uses weaves but changes the .bzr directory
716
* Sftp paths can now be relative, or local, according to the lftp
717
convention. Paths now take the form:
718
sftp://user:pass@host:port/~/relative/path
720
sftp://user:pass@host:port/absolute/path
722
* The FTP transport now tries to reconnect after a temporary
723
failure. ftp put is made atomic. (Matthieu Moy)
725
* The FTP transport now maintains a pool of connections, and
726
reuses them to avoid multiple connections to the same host (like
727
sftp did). (Daniel Silverstone)
729
* The bzr_man.py file has been removed. To create the man page now,
730
use ./generate_docs.py man. The new program can also create other files.
731
Run "python generate_docs.py --help" for usage information. (Hans
732
Ulrich Niedermann & James Blackwell).
734
* Man Page now gives full help (James Blackwell). Help also updated to
735
reflect user config now being stored in .bazaar (Hans Ulrich
738
* It's now possible to set aliases in bazaar.conf (Erik Bågfors)
740
* Pull now accepts a --revision argument (Erik Bågfors)
742
* 'bzr re-sign' now allows multiple revisions to be supplied on the command
743
line. You can now use the following command to sign all of your old commits.
744
find .bzr/revision-store// -name my@email-* \
745
| sed 's/.*\/\/..\///' \
748
* Upgrade can now upgrade over the network. (Robert Collins)
750
* Two new commands 'bzr checkout' and 'bzr update' allow for CVS/SVN-alike
751
behaviour. By default they will cache history in the checkout, but
752
with --lightweight almost all data is kept in the master branch.
755
* 'revert' unversions newly-versioned files, instead of deleting them.
757
* 'merge' is more robust. Conflict messages have changed.
759
* 'merge' and 'revert' no longer clobber existing files that end in '~' or
762
* Default log format can be set in configuration and plugins can register
763
their own formatters. (Erik Bågfors)
765
* New 'reconcile' command will check branch consistency and repair indexes
766
that can become out of sync in pre 0.8 formats. (Robert Collins,
769
* New 'bzr init --format' and 'bzr upgrade --format' option to control
770
what storage format is created or produced. (Robert Collins,
773
* Add parent location to 'bzr info', if there is one. (Olaf Conradi)
775
* New developer commands 'weave-list' and 'weave-join'. (Martin Pool)
777
* New 'init-repository' command, plus support for repositories in 'init'
778
and 'branch' (Aaron Bentley, Erik Bågfors, Robert Collins)
780
* Improve output of 'info' command. Show all relevant locations related to
781
working tree, branch and repository. Use kibibytes for binary quantities.
782
Fix off-by-one error in missing revisions of working tree. Make 'info'
783
work on branches, repositories and remote locations. Show locations
784
relative to the shared repository, if applicable. Show locking status
785
of locations. (Olaf Conradi)
787
* Diff and merge now safely handle binary files. (Aaron Bentley)
789
* 'pull' and 'push' now normalise the revision history, so that any two
790
branches with the same tip revision will have the same output from 'log'.
793
* 'merge' accepts --remember option to store parent location, like 'push'
794
and 'pull'. (Olaf Conradi)
796
* bzr status and diff when files given as arguments do not exist
797
in the relevant trees. (Martin Pool, #3619)
799
* Add '.hg' to the default ignore list. (Martin Pool)
801
* 'knit' is now the default disk format. This improves disk performance and
802
utilization, increases incremental pull performance, robustness with SFTP
803
and allows checkouts over SFTP to perform acceptably.
804
The initial Knit code was contributed by Johan Rydberg based on a
805
specification by Martin Pool.
806
(Robert Collins, Aaron Bentley, Johan Rydberg, Martin Pool).
808
* New tool to generate all-in-one html version of the manual. (Alexander
811
* Hitting CTRL-C while doing an SFTP push will no longer cause stale locks
812
to be left in the SFTP repository. (Robert Collins, Martin Pool).
814
* New option 'diff --prefix' to control how files are named in diff
815
output, with shortcuts '-p0' and '-p1' corresponding to the options for
816
GNU patch. (Alexander Belchenko, Goffredo Baroncelli, Martin Pool)
818
* Add --revision option to 'annotate' command. (Olaf Conradi)
820
* If bzr shows an unexpected revision-history after pulling (perhaps due
821
to a reweave) it can now be corrected by 'bzr reconcile'.
826
* Commit is now verbose by default, and shows changed filenames and the
827
new revision number. (Robert Collins, Martin Pool)
829
* Unify 'mv', 'move', 'rename'. (#5379, Matthew Fuller)
831
* 'bzr -h' shows help. (#35940, Martin Pool, Ian Bicking)
833
* Make 'pull' and 'push' remember location on failure using --remember.
836
* For compatibility, make old format for using weaves inside metadir
837
available as 'metaweave' format. Rename format 'metadir' to 'default'.
838
Clean up help for option --format in commands 'init', 'init-repo' and
839
'upgrade'. (Olaf Conradi)
843
* The internal storage of history, and logical branch identity have now
844
been split into Branch, and Repository. The common locking and file
845
management routines are now in bzrlib.lockablefiles.
846
(Aaron Bentley, Robert Collins, Martin Pool)
848
* Transports can now raise DependencyNotPresent if they need a library
849
which is not installed, and then another implementation will be
852
* Remove obsolete (and no-op) `decode` parameter to `Transport.get`.
855
* Using Tree Transform for merge, revert, tree-building
857
* WorkingTree.create, Branch.create, WorkingTree.create_standalone,
858
Branch.initialize are now deprecated. Please see BzrDir.create_* for
859
replacement API's. (Robert Collins)
861
* New BzrDir class represents the .bzr control directory and manages
862
formatting issues. (Robert Collins)
864
* New repository.InterRepository class encapsulates Repository to
865
Repository actions and allows for clean selection of optimised code
866
paths. (Robert Collins)
868
* bzrlib.fetch.fetch and bzrlib.fetch.greedy_fetch are now deprecated,
869
please use 'branch.fetch' or 'repository.fetch' depending on your
870
needs. (Robert Collins)
872
* deprecated methods now have a 'is_deprecated' flag on them that can
873
be checked, if you need to determine whether a given callable is
874
deprecated at runtime. (Robert Collins)
876
* Progress bars are now nested - see
877
bzrlib.ui.ui_factory.nested_progress_bar. (Robert Collins, Robey Pointer)
879
* New API call get_format_description() for each type of format.
882
* Changed branch.set_parent() to accept None to remove parent.
885
* Deprecated BzrError AmbiguousBase. (Olaf Conradi)
887
* WorkingTree.branch is now a read only property. (Robert Collins)
889
* bzrlib.ui.text.TextUIFactory now accepts a bar_type parameter which
890
can be None or a factory that will create a progress bar. This is
891
useful for testing or for overriding the bzrlib.progress heuristic.
894
* New API method get_physical_lock_status() to query locks present on a
895
transport. (Olaf Conradi)
897
* Repository.reconcile now takes a thorough keyword parameter to allow
898
requesting an indepth reconciliation, rather than just a data-loss
899
check. (Robert Collins)
901
* bzrlib.ui.ui_factory protocol now supports 'get_boolean' to prompt
902
the user for yes/no style input. (Robert Collins)
906
* SFTP tests now shortcut the SSH negotiation, reducing test overhead
907
for testing SFTP protocol support. (Robey Pointer)
909
* Branch formats are now tested once per implementation (see bzrlib.
910
tests.branch_implementations. This is analagous to the transport
911
interface tests, and has been followed up with working tree,
912
repository and BzrDir tests. (Robert Collins)
914
* New test base class TestCaseWithTransport provides a transport aware
915
test environment, useful for testing any transport-interface using
916
code. The test suite option --transport controls the transport used
917
by this class (when its not being used as part of implementation
918
contract testing). (Robert Collins)
920
* Close logging handler on disabling the test log. This will remove the
921
handler from the internal list inside python's logging module,
922
preventing shutdown from closing it twice. (Olaf Conradi)
924
* Move test case for uncommit to blackbox tests. (Olaf Conradi)
926
* run_bzr and run_bzr_captured now accept a 'stdin="foo"' parameter which
927
will provide String("foo") to the command as its stdin.
933
* .bzrignore is excluded from exports, on the grounds that it's a bzr
934
internal-use file and may not be wanted. (Jamie Wilkinson)
936
* The "bzr directories" command were removed in favor of the new
937
--kind option to the "bzr inventory" command. To list all
938
versioned directories, now use "bzr inventory --kind directory".
941
* Under Windows configuration directory is now %APPDATA%\bazaar\2.0
942
by default. (John Arbash Meinel)
944
* The parent of Bzr configuration directory can be set by BZR_HOME
945
environment variable. Now the path for it is searched in BZR_HOME, then
946
in HOME. Under Windows the order is: BZR_HOME, APPDATA (usually
947
points to C:\Documents and Settings\User Name\Application Data), HOME.
950
* Plugins with the same name in different directories in the bzr plugin
951
path are no longer loaded: only the first successfully loaded one is
952
used. (Robert Collins)
954
* Use systems' external ssh command to open connections if possible.
955
This gives better integration with user settings such as ProxyCommand.
958
* Permissions on files underneath .bzr/ are inherited from the .bzr
959
directory. So for a shared repository, simply doing 'chmod -R g+w .bzr/'
960
will mean that future file will be created with group write permissions.
962
* configure.in and config.guess are no longer in the builtin default
965
* '.sw[nop]' pattern ignored, to ignore vim swap files for nameless
966
files. (John Arbash Meinel, Martin Pool)
970
* "bzr INIT dir" now initializes the specified directory, and creates
971
it if it does not exist. (John Arbash Meinel)
973
* New remerge command (Aaron Bentley)
975
* Better zsh completion script. (Steve Borho)
977
* 'bzr diff' now returns 1 when there are changes in the working
978
tree. (Robert Collins)
980
* 'bzr push' now exists and can push changes to a remote location.
981
This uses the transport infrastructure, and can store the remote
982
location in the ~/.bazaar/branches.conf configuration file.
985
* Test directories are only kept if the test fails and the user requests
988
* Tweaks to short log printing
990
* Added branch nicks, new nick command, printing them in log output.
993
* If $BZR_PDB is set, pop into the debugger when an uncaught exception
994
occurs. (Martin Pool)
996
* Accept 'bzr resolved' (an alias for 'bzr resolve'), as this is
997
the same as Subversion. (Martin Pool)
999
* New ftp transport support (on ftplib), for ftp:// and aftp://
1000
URLs. (Daniel Silverstone)
1002
* Commit editor temporary files now start with 'bzr_log.', to allow
1003
text editors to match the file name and set up appropriate modes or
1004
settings. (Magnus Therning)
1006
* Improved performance when integrating changes from a remote weave.
1007
(Goffredo Baroncelli)
1009
* Sftp will attempt to cache the connection, so it is more likely that
1010
a connection will be reused, rather than requiring multiple password
1013
* bzr revno now takes an optional argument indicating the branch whose
1014
revno should be printed. (Michael Ellerman)
1016
* bzr cat defaults to printing the last version of the file.
1017
(#3632, Matthieu Moy)
1019
* New global option 'bzr --lsprof COMMAND' runs bzr under the lsprof
1020
profiler. (Denys Duchier)
1022
* Faster commits by reading only the headers of affected weave files.
1025
* 'bzr add' now takes a --dry-run parameter which shows you what would be
1026
added, but doesn't actually add anything. (Michael Ellerman)
1028
* 'bzr add' now lists how many files were ignored per glob. add --verbose
1029
lists the specific files. (Aaron Bentley)
1031
* 'bzr missing' now supports displaying changes in diverged trees and can
1032
be limited to show what either end of the comparison is missing.
1033
(Aaron Bently, with a little prompting from Daniel Silverstone)
1037
* SFTP can walk up to the root path without index errors. (Robert Collins)
1039
* Fix bugs in running bzr with 'python -O'. (Martin Pool)
1041
* Error when run with -OO
1043
* Fix bug in reporting http errors that don't have an http error code.
1046
* Handle more cases of pipe errors in display commands
1048
* Change status to 3 for all errors
1050
* Files that are added and unlinked before committing are completely
1051
ignored by diff and status
1053
* Stores with some compressed texts and some uncompressed texts are now
1054
able to be used. (John A Meinel)
1056
* Fix for bzr pull failing sometimes under windows
1058
* Fix for sftp transport under windows when using interactive auth
1060
* Show files which are both renamed and modified as such in 'bzr
1061
status' output. (#4503, Daniel Silverstone)
1063
* Make annotate cope better with revisions committed without a valid
1064
email address. (Marien Zwart)
1066
* Fix representation of tab characters in commit messages. (Harald
1069
* List of plugin directories in BZR_PLUGIN_PATH environment variable is
1070
now parsed properly under Windows. (Alexander Belchenko)
1072
* Show number of revisions pushed/pulled/merged. (Robey Pointer)
1074
* Keep a cached copy of the basis inventory to speed up operations
1075
that need to refer to it. (Johan Rydberg, Martin Pool)
1077
* Fix bugs in bzr status display of non-ascii characters. (Martin
1080
* Remove Makefile.in from default ignore list. (#6413, Tollef Fog
1083
* Fix failure in 'bzr added'. (Nathan McCallum, Martin Pool)
1087
* Fix selftest asking for passwords when there are no SFTP keys.
1088
(Robey Pointer, Jelmer Vernooij)
1090
* Fix selftest run with 'python -O'. (Martin Pool)
1092
* Fix HTTP tests under Windows. (John Arbash Meinel)
1094
* Make tests work even if HOME is not set (Aaron Bentley)
1096
* Updated build_tree to use fixed line-endings for tests which read
1097
the file cotents and compare. Make some tests use this to pass under
1098
Windows. (John Arbash Meinel)
1100
* Skip stat and symlink tests under Windows. (Alexander Belchenko)
1102
* Delay in selftest/testhashcash is now issued under win32 and Cygwin.
1103
(John Arbash Meinel)
1105
* Use terminal width to align verbose test output. (Martin Pool)
1107
* Blackbox tests are maintained within the bzrlib.tests.blackbox directory.
1108
If adding a new test script please add that to
1109
bzrlib.tests.blackbox.__init__. (Robert Collins)
1111
* Much better error message if one of the test suites can't be
1112
imported. (Martin Pool)
1114
* Make check now runs the test suite twice - once with the default locale,
1115
and once with all locales forced to C, to expose bugs. This is not
1116
trivially done within python, so for now its only triggered by running
1117
Make check. Integrators and packagers who wish to check for full
1118
platform support should run 'make check' to test the source.
1121
* Tests can now run TestSkipped if they can't execute for any reason.
1122
(Martin Pool) (NB: TestSkipped should only be raised for correctable
1123
reasons - see the wiki spec ImprovingBzrTestSuite).
1125
* Test sftp with relative, absolute-in-homedir and absolute-not-in-homedir
1126
paths for the transport tests. Introduce blackbox remote sftp tests that
1127
test the same permutations. (Robert Collins, Robey Pointer)
1129
* Transport implementation tests are now independent of the local file
1130
system, which allows tests for esoteric transports, and for features
1131
not available in the local file system. They also repeat for variations
1132
on the URL scheme that can introduce issues in the transport code,
1133
see bzrlib.transport.TransportTestProviderAdapter() for this.
1136
* TestCase.build_tree uses the transport interface to build trees, pass
1137
in a transport parameter to give it an existing connection.
1142
* WorkingTree.pull has been split across Branch and WorkingTree,
1143
to allow Branch only pulls. (Robert Collins)
1145
* commands.display_command now returns the result of the decorated
1146
function. (Robert Collins)
1148
* LocationConfig now has a set_user_option(key, value) call to save
1149
a setting in its matching location section (a new one is created
1150
if needed). (Robert Collins)
1152
* Branch has two new methods, get_push_location and set_push_location
1153
to respectively, get and set the push location. (Robert Collins)
1155
* commands.register_command now takes an optional flag to signal that
1156
the registrant is planning to decorate an existing command. When
1157
given multiple plugins registering a command is not an error, and
1158
the original command class (whether built in or a plugin based one) is
1159
returned to the caller. There is a new error 'MustUseDecorated' for
1160
signalling when a wrapping command should switch to the original
1161
version. (Robert Collins)
1163
* Some option parsing errors will raise 'BzrOptionError', allowing
1164
granular detection for decorating commands. (Robert Collins).
1166
* Branch.read_working_inventory has moved to
1167
WorkingTree.read_working_inventory. This necessitated changes to
1168
Branch.get_root_id, and a move of Branch.set_inventory to WorkingTree
1169
as well. To make it clear that a WorkingTree cannot always be obtained
1170
Branch.working_tree() will raise 'errors.NoWorkingTree' if one cannot
1171
be obtained. (Robert Collins)
1173
* All pending merges operations from Branch are now on WorkingTree.
1176
* The follow operations from Branch have moved to WorkingTree:
1184
* bzrlib.add.smart_add_branch is now smart_add_tree. (Robert Collins)
1186
* New "rio" serialization format, similar to rfc-822. (Martin Pool)
1188
* Rename selftests to `bzrlib.tests.test_foo`. (John A Meinel, Martin
1191
* bzrlib.plugin.all_plugins has been changed from an attribute to a
1192
query method. (Robert Collins)
1194
* New options to read only the table-of-contents of a weave.
1197
* Raise NoSuchFile when someone tries to add a non-existant file.
1200
* Simplify handling of DivergedBranches in cmd_pull().
1204
* Branch.controlfile* logic has moved to lockablefiles.LockableFiles, which
1205
is exposed as Branch().control_files. Also this has been altered with the
1206
controlfile pre/suffix replaced by simple method names like 'get' and
1207
'put'. (Aaron Bentley, Robert Collins).
1209
* Deprecated functions and methods can now be marked as such using the
1210
bzrlib.symbol_versioning module. Marked method have their docstring
1211
updated and will issue a DeprecationWarning using the warnings module
1212
when they are used. (Robert Collins)
1214
* bzrlib.osutils.safe_unicode now exists to provide parameter coercion
1215
for functions that need unicode strings. (Robert Collins)
1221
* pull now takes --verbose to show you what revisions are added or removed
1224
* merge now takes a --show-base option to include the base text in
1228
* The config files are now read using ConfigObj, so '=' should be used as
1229
a separator, not ':'.
1232
* New 'bzr commit --strict' option refuses to commit if there are
1233
any unknown files in the tree. To commit, make sure all files are
1234
either ignored, added, or deleted. (Michael Ellerman)
1236
* The config directory is now ~/.bazaar, and there is a single file
1237
~/.bazaar/bazaar.conf storing email, editor and other preferences.
1240
* 'bzr add' no longer takes a --verbose option, and a --quiet option
1241
has been added that suppresses all output.
1243
* Improved zsh completion support in contrib/zsh, from Clint
1246
* Builtin 'bzr annotate' command, by Martin Pool with improvements from
1247
Goffredo Baroncelli.
1249
* 'bzr check' now accepts -v for verbose reporting, and checks for
1250
ghosts in the branch. (Robert Collins)
1252
* New command 're-sign' which will regenerate the gpg signature for
1253
a revision. (Robert Collins)
1255
* If you set check_signatures=require for a path in
1256
~/.bazaar/branches.conf then bzr will invoke your
1257
gpg_signing_command (defaults to gpg) and record a digital signature
1258
of your commit. (Robert Collins)
1260
* New sftp transport, based on Paramiko. (Robey Pointer)
1262
* 'bzr pull' now accepts '--clobber' which will discard local changes
1263
and make this branch identical to the source branch. (Robert Collins)
1265
* Just give a quieter warning if a plugin can't be loaded, and
1266
put the details in .bzr.log. (Martin Pool)
1268
* 'bzr branch' will now set the branch-name to the last component of the
1269
output directory, if one was supplied.
1271
* If the option 'post_commit' is set to one (or more) python function
1272
names (must be in the bzrlib namespace), then they will be invoked
1273
after the commit has completed, with the branch and revision_id as
1274
parameters. (Robert Collins)
1276
* Merge now has a retcode of 1 when conflicts occur. (Robert Collins)
1278
* --merge-type weave is now supported for file contents. Tree-shape
1279
changes are still three-way based. (Martin Pool, Aaron Bentley)
1281
* 'bzr check' allows the first revision on revision-history to have
1282
parents - something that is expected for cheap checkouts, and occurs
1283
when conversions from baz do not have all history. (Robert Collins).
1285
* 'bzr merge' can now graft unrelated trees together, if your specify
1286
0 as a base. (Aaron Bentley)
1288
* 'bzr commit branch' and 'bzr commit branch/file1 branch/file2' now work
1291
* Add '.sconsign*' to default ignore list. (Alexander Belchenko)
1293
* 'bzr merge --reprocess' minimizes conflicts
1297
* The 'bzr selftest --pattern' option for has been removed, now
1298
test specifiers on the command line can be simple strings, or
1299
regexps, or both. (Robert Collins)
1301
* Passing -v to selftest will now show the time each test took to
1302
complete, which will aid in analysing performance regressions and
1303
related questions. (Robert Collins)
1305
* 'bzr selftest' runs all tests, even if one fails, unless '--one'
1306
is given. (Martin Pool)
1308
* There is a new method for TestCaseInTempDir, assertFileEqual, which
1309
will check that a given content is equal to the content of the named
1310
file. (Robert Collins)
1312
* Fix test suite's habit of leaving many temporary log files in $TMPDIR.
1317
* New 'testament' command and concept for making gpg-signatures
1318
of revisions that are not tied to a particular internal
1319
representation. (Martin Pool).
1321
* Per-revision properties ('revprops') as key-value associated
1322
strings on each revision created when the revision is committed.
1323
Intended mainly for the use of external tools. (Martin Pool).
1325
* Config options have moved from bzrlib.osutils to bzrlib.config.
1328
* Improved command line option definitions allowing explanations
1329
for individual options, among other things. Contributed by
1332
* Config options have moved from bzrlib.osutils to bzrlib.config.
1333
Configuration is now done via the config.Config interface:
1334
Depending on whether you have a Branch, a Location or no information
1335
available, construct a *Config, and use its signature_checking,
1336
username and user_email methods. (Robert Collins)
1338
* Plugins are now loaded under bzrlib.plugins, not bzrlib.plugin, and
1339
they are made available for other plugins to use. You should not
1340
import other plugins during the __init__ of your plugin though, as
1341
no ordering is guaranteed, and the plugins directory is not on the
1342
python path. (Robert Collins)
1344
* Branch.relpath has been moved to WorkingTree.relpath. WorkingTree no
1345
no longer takes an inventory, rather it takes an option branch
1346
parameter, and if None is given will open the branch at basedir
1347
implicitly. (Robert Collins)
1349
* Cleaner exception structure and error reporting. Suggested by
1350
Scott James Remnant. (Martin Pool)
1352
* Branch.remove has been moved to WorkingTree, which has also gained
1353
lock_read, lock_write and unlock methods for convenience. (Robert
1356
* Two decorators, needs_read_lock and needs_write_lock have been added
1357
to the branch module. Use these to cause a function to run in a
1358
read or write lock respectively. (Robert Collins)
1360
* Branch.open_containing now returns a tuple (Branch, relative-path),
1361
which allows direct access to the common case of 'get me this file
1362
from its branch'. (Robert Collins)
1364
* Transports can register using register_lazy_transport, and they
1365
will be loaded when first used. (Martin Pool)
1367
* 'pull' has been factored out of the command as WorkingTree.pull().
1368
A new option to WorkingTree.pull has been added, clobber, which will
1369
ignore diverged history and pull anyway.
1372
* config.Config has a 'get_user_option' call that accepts an option name.
1373
This will be looked up in branches.conf and bazaar.conf as normal.
1374
It is intended that this be used by plugins to support options -
1375
options of built in programs should have specific methods on the config.
1378
* merge.merge_inner now has tempdir as an optional parameter. (Robert
1381
* Tree.kind is not recorded at the top level of the hierarchy, as it was
1382
missing on EmptyTree, leading to a bug with merge on EmptyTrees.
1385
* WorkingTree.__del__ has been removed, it was non deterministic and not
1386
doing what it was intended to. See WorkingTree.__init__ for a comment
1387
about future directions. (Robert Collins/Martin Pool)
1389
* bzrlib.transport.http has been modified so that only 404 urllib errors
1390
are returned as NoSuchFile. Other exceptions will propogate as normal.
1391
This allows debuging of actual errors. (Robert Collins)
1393
* bzrlib.transport.Transport now accepts *ONLY* url escaped relative paths
1394
to apis like 'put', 'get' and 'has'. This is to provide consistent
1395
behaviour - it operates on url's only. (Robert Collins)
1397
* Transports can register using register_lazy_transport, and they
1398
will be loaded when first used. (Martin Pool)
1400
* 'merge_flex' no longer calls conflict_handler.finalize(), instead that
1401
is called by merge_inner. This is so that the conflict count can be
1402
retrieved (and potentially manipulated) before returning to the caller
1403
of merge_inner. Likewise 'merge' now returns the conflict count to the
1404
caller. (Robert Collins)
1406
* 'revision.revision_graph can handle having only partial history for
1407
a revision - that is no revisions in the graph with no parents.
1410
* New builtins.branch_files uses the standard file_list rules to produce
1411
a branch and a list of paths, relative to that branch (Aaron Bentley)
1413
* New TestCase.addCleanup facility.
1415
* New bzrlib.version_info tuple (similar to sys.version_info), which can
1416
be used by programs importing bzrlib.
1420
* Better handling of branches in directories with non-ascii names.
1421
(Joel Rosdahl, Panagiotis Papadakos)
1423
* Upgrades of trees with no commits will not fail due to accessing
1424
[-1] in the revision-history. (Andres Salomon)
1427
bzr 0.1.1 2005-10-12
1431
* Fix problem in pulling over http from machines that do not
1432
allow directories to be listed.
1434
* Avoid harmless warning about invalid hash cache after
1435
upgrading branch format.
1439
* Avoid some unnecessary http operations in branch and pull.
1446
* 'bzr branch' over http initially gives a very high estimate
1447
of completion time but it should fall as the first few
1448
revisions are pulled in. branch is still slow on
1449
high-latency connections.
1453
* bzr-man.py has been updated to work again. Contributed by
1456
* Locking is now done with fcntl.lockf which works with NFS
1457
file systems. Contributed by Harald Meland.
1459
* When a merge encounters a file that has been deleted on
1460
one side and modified on the other, the old contents are
1461
written out to foo.BASE and foo.SIDE, where SIDE is this
1462
or OTHER. Contributed by Aaron Bentley.
1464
* Export was choosing incorrect file paths for the content of
1465
the tarball, this has been fixed by Aaron Bentley.
1467
* Commit will no longer commit without a log message, an
1468
error is returned instead. Contributed by Jelmer Vernooij.
1470
* If you commit a specific file in a sub directory, any of its
1471
parent directories that are added but not listed will be
1472
automatically included. Suggested by Michael Ellerman.
1474
* bzr commit and upgrade did not correctly record new revisions
1475
for files with only a change to their executable status.
1476
bzr will correct this when it encounters it. Fixed by
1479
* HTTP tests now force off the use of http_proxy for the duration.
1480
Contributed by Gustavo Niemeyer.
1482
* Fix problems in merging weave-based branches that have
1483
different partial views of history.
1485
* Symlink support: working with symlinks when not in the root of a
1486
bzr tree was broken, patch from Scott James Remnant.
1490
* 'branch' now accepts a --basis parameter which will take advantage
1491
of local history when making a new branch. This allows faster
1492
branching of remote branches. Contributed by Aaron Bentley.
1494
* New tree format based on weave files, called version 5.
1495
Existing branches can be upgraded to this format using
1498
* Symlinks are now versionable. Initial patch by
1499
Erik Toubro Nielsen, updated to head by Robert Collins.
1501
* Executable bits are tracked on files. Patch from Gustavo
1504
* 'bzr status' now shows unknown files inside a selected directory.
1505
Patch from Heikki Paajanen.
1507
* Merge conflicts are recorded in .bzr. Two new commands 'conflicts'
1508
and 'resolve' have needed added, which list and remove those
1509
merge conflicts respectively. A conflicted tree cannot be committed
1510
in. Contributed by Aaron Bentley.
1512
* 'rm' is now an alias for 'remove'.
1514
* Stores now split out their content in a single byte prefixed hash,
1515
dropping the density of files per directory by 256. Contributed by
1518
* 'bzr diff -r branch:URL' will now perform a diff between two branches.
1519
Contributed by Robert Collins.
1521
* 'bzr log' with the default formatter will show merged revisions,
1522
indented to the right. Initial implementation contributed by Gustavo
1523
Niemeyer, made incremental by Robert Collins.
1528
* Test case failures have the exception printed after the log
1529
for your viewing pleasure.
1531
* InventoryEntry is now an abstract base class, use one of the
1532
concrete InventoryDirectory etc classes instead.
1534
* Branch raises an UnsupportedFormatError when it detects a
1535
bzr branch it cannot understand. This allows for precise
1536
handling of such circumstances.
1541
* Removed testsweet module so that tests can be run after
1542
bzr installed by 'bzr selftest'.
1544
* 'bzr selftest' command-line arguments can now be partial ids
1545
of tests to run, e.g. 'bzr selftest test_weave'
1548
bzr 0.0.9 2005-09-23
1552
* Fixed "branch -r" option.
1554
* Fix remote access to branches containing non-compressed history.
1557
* Better reliability of http server tests. (John Arbash-Meinel)
1559
* Merge graph maximum distance calculation fix. (Aaron Bentley)
1561
* Various minor bug in windows support have been fixed, largely in the
1562
test suite. Contributed by Alexander Belchenko.
1566
* Status now accepts a -r argument to give status between chosen
1567
revisions. Contributed by Heikki Paajanen.
1569
* Revision arguments no longer use +/-/= to control ranges, instead
1570
there is a 'before' namespace, which limits the successive namespace.
1571
For example '$ bzr log -r date:yesterday..before:date:today' will
1572
select everything from yesterday and before today. Contributed by
1575
* There is now a bzr.bat file created by distutils when building on
1576
Windows. Contributed by Alexander Belchenko.
1580
* Removed uuid() as it was unused.
1582
* Improved 'fetch' code for pulling revisions from one branch into
1583
another (used by pull, merged, etc.)
1586
bzr 0.0.8 2005-09-20
1590
* Adding a file whose parent directory is not versioned will
1591
implicitly add the parent, and so on up to the root. This means
1592
you should never need to explictly add a directory, they'll just
1593
get added when you add a file in the directory. Contributed by
1596
* Ignore .DS_Store (contains Mac metadata) by default. Patch from
1599
* If you set BZR_EDITOR in the environment, it is checked in
1600
preference to EDITOR and the config file for the interactive commit
1601
editing program. Related to this is a bugfix where a missing program
1602
set in EDITOR would cause editing to fail, now the fallback program
1603
for the operating system is still tried.
1605
* Files that are not directories/symlinks/regular files will no longer
1606
cause bzr to fail, it will just ignore them by default. You cannot add
1607
them to the tree though - they are not versionable.
1612
* Refactor xml packing/unpacking.
1616
* Fixed 'bzr mv' by Ollie Rutherfurd.
1618
* Fixed strange error when trying to access a nonexistent http
1621
* Make sure that the hashcache gets written out if it can't be
1627
* Various Windows fixes from Ollie Rutherfurd.
1629
* Quieten warnings about locking; patch from Matt Lavin.
1632
bzr-0.0.7 2005-09-02
1636
* ``bzr shell-complete`` command contributed by Clint Adams to
1637
help with intelligent shell completion.
1639
* New expert command ``bzr find-merge-base`` for debugging merges.
1644
* Much better merge support.
1646
* merge3 conflicts are now reported with markers like '<<<<<<<'
1647
(seven characters) which is the same as CVS and pleases things
1653
* ``bzr upgrade`` no longer fails when trying to fix trees that
1654
mention revisions that are not present.
1656
* Fixed bugs in listing plugins from ``bzr plugins``.
1658
* Fix case of $EDITOR containing options for the editor.
1660
* Fix log -r refusing to show the last revision.
1661
(Patch from Goffredo Baroncelli.)
1666
* ``bzr log --show-ids`` shows the revision ids of all parents.
1668
* Externally provided commands on your $BZRPATH no longer need
1669
to recognize --bzr-usage to work properly, and can just handle
1675
* Changed trace messages to go through the standard logging
1676
framework, so that they can more easily be redirected by
1681
bzr-0.0.6 2005-08-18
1685
* Python plugins, automatically loaded from the directories on
1686
BZR_PLUGIN_PATH or ~/.bzr.conf/plugins by default.
1688
* New 'bzr mkdir' command.
1690
* Commit mesage is fetched from an editor if not given on the
1691
command line; patch from Torsten Marek.
1693
* ``bzr log -m FOO`` displays commits whose message matches regexp
1696
* ``bzr add`` with no arguments adds everything under the current directory.
1698
* ``bzr mv`` does move or rename depending on its arguments, like
1701
* ``bzr missing`` command shows a summary of the differences
1702
between two trees. (Merged from John Arbash-Meinel.)
1704
* An email address for commits to a particular tree can be
1705
specified by putting it into .bzr/email within a branch. (Based
1706
on a patch from Heikki Paajanen.)
1711
* Faster working tree operations.
1716
* 3rd-party modules shipped with bzr are copied within the bzrlib
1717
python package, so that they can be installed by the setup
1718
script without clashing with anything already existing on the
1719
system. (Contributed by Gustavo Niemeyer.)
1721
* Moved plugins directory to bzrlib/, so that there's a standard
1722
plugin directory which is not only installed with bzr itself but
1723
is also available when using bzr from the development tree.
1724
BZR_PLUGIN_PATH and DEFAULT_PLUGIN_PATH are then added to the
1725
standard plugins directory.
1727
* When exporting to a tarball with ``bzr export --format tgz``, put
1728
everything under a top directory rather than dumping it into the
1729
current directory. This can be overridden with the ``--root``
1730
option. Patch from William Dodé and John Meinel.
1732
* New ``bzr upgrade`` command to upgrade the format of a branch,
1733
replacing ``bzr check --update``.
1735
* Files within store directories are no longer marked readonly on
1738
* Changed ``bzr log`` output to a more compact form suggested by
1739
John A Meinel. Old format is available with the ``--long`` or
1740
``-l`` option, patched by William Dodé.
1742
* By default the commit command refuses to record a revision with
1743
no changes unless the ``--unchanged`` option is given.
1745
* The ``--no-plugins``, ``--profile`` and ``--builtin`` command
1746
line options must come before the command name because they
1747
affect what commands are available; all other options must come
1748
after the command name because their interpretation depends on
1751
* ``branch`` and ``clone`` added as aliases for ``branch``.
1753
* Default log format is back to the long format; the compact one
1754
is available with ``--short``.
1759
* Fix bugs in committing only selected files or within a subdirectory.
1762
bzr-0.0.5 2005-06-15
1766
* ``bzr`` with no command now shows help rather than giving an
1767
error. Suggested by Michael Ellerman.
1769
* ``bzr status`` output format changed, because svn-style output
1770
doesn't really match the model of bzr. Now files are grouped by
1771
status and can be shown with their IDs. ``bzr status --all``
1772
shows all versioned files and unknown files but not ignored files.
1774
* ``bzr log`` runs from most-recent to least-recent, the reverse
1775
of the previous order. The previous behaviour can be obtained
1776
with the ``--forward`` option.
1778
* ``bzr inventory`` by default shows only filenames, and also ids
1779
if ``--show-ids`` is given, in which case the id is the second
1785
* New 'bzr whoami --email' option shows only the email component
1786
of the user identification, from Jo Vermeulen.
1788
* New ``bzr ignore PATTERN`` command.
1790
* Nicer error message for broken pipe, interrupt and similar
1791
conditions that don't indicate an internal error.
1793
* Add ``.*.sw[nop] .git .*.tmp *,v`` to default ignore patterns.
1795
* Per-branch locks keyed on ``.bzr/branch-lock``, available in
1796
either read or write mode.
1798
* New option ``bzr log --show-ids`` shows revision and file ids.
1800
* New usage ``bzr log FILENAME`` shows only revisions that
1803
* Changed format for describing changes in ``bzr log -v``.
1805
* New option ``bzr commit --file`` to take a message from a file,
1806
suggested by LarstiQ.
1808
* New syntax ``bzr status [FILE...]`` contributed by Bartosz
1809
Oler. File may be in a branch other than the working directory.
1811
* ``bzr log`` and ``bzr root`` can be given an http URL instead of
1814
* Commands can now be defined by external programs or scripts
1815
in a directory on $BZRPATH.
1817
* New "stat cache" avoids reading the contents of files if they
1818
haven't changed since the previous time.
1820
* If the Python interpreter is too old, try to find a better one
1821
or give an error. Based on a patch from Fredrik Lundh.
1823
* New optional parameter ``bzr info [BRANCH]``.
1825
* New form ``bzr commit SELECTED`` to commit only selected files.
1827
* New form ``bzr log -r FROM:TO`` shows changes in selected
1828
range; contributed by John A Meinel.
1830
* New option ``bzr diff --diff-options 'OPTS'`` allows passing
1831
options through to an external GNU diff.
1833
* New option ``bzr add --no-recurse`` to add a directory but not
1836
* ``bzr --version`` now shows more information if bzr is being run
1842
* Fixed diff format so that added and removed files will be
1843
handled properly by patch. Fix from Lalo Martins.
1845
* Various fixes for files whose names contain spaces or other
1851
* Converted black-box test suites from Bourne shell into Python;
1852
now run using ``./testbzr``. Various structural improvements to
1855
* testbzr by default runs the version of bzr found in the same
1856
directory as the tests, or the one given as the first parameter.
1858
* testbzr also runs the internal tests, so the only command
1859
required to check is just ``./testbzr``.
1861
* testbzr requires python2.4, but can be used to test bzr running
1862
under a different version.
1864
* Tests added for many other changes in this release.
1869
* Included ElementTree library upgraded to 1.2.6 by Fredrik Lundh.
1871
* Refactor command functions into Command objects based on HCT by
1872
Scott James Remnant.
1874
* Better help messages for many commands.
1876
* Expose bzrlib.open_tracefile() to start the tracefile; until
1877
this is called trace messages are just discarded.
1879
* New internal function find_touching_revisions() and hidden
1880
command touching-revisions trace the changes to a given file.
1882
* Simpler and faster compare_inventories() function.
1884
* bzrlib.open_tracefile() takes a tracefilename parameter.
1886
* New AtomicFile class.
1888
* New developer commands ``added``, ``modified``.
1893
* Cope on Windows on python2.3 by using the weaker random seed.
1894
2.4 is now only recommended.
1897
bzr-0.0.4 2005-04-22
1901
* 'bzr diff' optionally takes a list of files to diff. Still a bit
1902
basic. Patch from QuantumG.
1904
* More default ignore patterns.
1906
* New 'bzr log --verbose' shows a list of files changed in the
1907
changeset. Patch from Sebastian Cote.
1909
* Roll over ~/.bzr.log if it gets too large.
1911
* Command abbreviations 'ci', 'st', 'stat', '?' based on a patch
1914
* New 'bzr help commands' based on a patch from Denys Duchier.
1919
* User email is determined by looking at $BZREMAIL or ~/.bzr.email
1920
or $EMAIL. All are decoded by the locale preferred encoding.
1921
If none of these are present user@hostname is used. The host's
1922
fully-qualified name is not used because that tends to fail when
1923
there are DNS problems.
1925
* New 'bzr whoami' command instead of username user-email.
1930
* Make commit safe for hardlinked bzr trees.
1932
* Some Unicode/locale fixes.
1934
* Partial workaround for difflib.unified_diff not handling
1935
trailing newlines properly.
1940
* Allow docstrings for help to be in PEP0257 format. Patch from
1943
* More tests in test.sh.
1945
* Write profile data to a temporary file not into working
1946
directory and delete it when done.
1948
* Smaller .bzr.log with process ids.
1953
* Fix opening of ~/.bzr.log on Windows. Patch from Andrew
1956
* Some improvements in handling paths on Windows, based on a patch
1960
bzr-0.0.3 2005-04-06
1964
* New "directories" internal command lists versioned directories
1967
* Can now say "bzr commit --help".
1969
* New "rename" command to rename one file to a different name
1972
* New "move" command to move one or more files into a different
1975
* New "renames" command lists files renamed since base revision.
1977
* New cat command contributed by janmar.
1981
* .bzr.log is placed in $HOME (not pwd) and is always written in
1982
UTF-8. (Probably not a completely good long-term solution, but
1987
* Workaround for difflib bug in Python 2.3 that causes an
1988
exception when comparing empty files. Reported by Erik Toubro
1993
* Refactored inventory storage to insert a root entry at the top.
1997
* Start of shell-based black-box testing in test.sh.
2004
* Win32 fixes from Steve Brown.
2007
bzr-0.0.2 "black cube" 2005-03-31
2011
* Default ignore list extended (see bzrlib/__init__.py).
2013
* Patterns in .bzrignore are now added to the default ignore list,
2014
rather than replacing it.
2016
* Ignore list isn't reread for every file.
2020
* Reinstate the 'bzr check' command to check invariants of the
2023
* New 'ignored' command lists which files are ignored and why;
2024
'deleted' lists files deleted in the current working tree.
2026
* Performance improvements.
2028
* New global --profile option.
2030
* Ignore patterns like './config.h' now correctly match files in
2031
the root directory only.
2034
bzr-0.0.1 2005-03-26
2038
* More information from info command.
2040
* Can now say "bzr help COMMAND" for more detailed help.
2042
* Less file flushing and faster performance when writing logs and
2043
committing to stores.
2045
* More useful verbose output from some commands.
2049
* Fix inverted display of 'R' and 'M' during 'commit -v'.
2053
* Include a subset of ElementTree-1.2.20040618 to make
2054
installation easier.
2056
* Fix time.localtime call to work with Python 2.3 (the minimum
2060
bzr-0.0.0.69 2005-03-22
2064
* First public release.
2066
* Storage of local versions: init, add, remove, rm, info, log,
added
removed
NEWS
