5
* PyCurlTransport now use a single curl object. By specifying explicitly
6
the 'Range' header, we avoid the need to use two different curl objects
7
(and two connections to the same server). (Vincent Ladeuil)
9
* ``bzr commit`` does not prompt for a message until it is very likely to
10
succeed. (Aaron Bentley)
12
* ``bzr conflicts`` now takes --text to list pathnames of text conflicts
15
* Fix ``iter_lines_added_or_present_in_versions`` to use a set instead
16
of a list while checking if a revision id was requested. Takes 10s
17
off of the ``fileids_affected_by_revision_ids`` time, which is 10s
18
of the ``bzr branch`` time. (John Arbash Meinel)
24
* The urllib connection sharing interacts badly with urllib2
25
proxy setting (the connections didn't go thru the proxy
26
anymore). Defining a proper ProxyHandler solves the
27
problem. (Vincent Ladeuil, #74759)
32
No changes from 0.13rc1
34
bzr 0.13rc1 2006-11-27
38
* New command ``bzr remove-tree`` allows the removal of the working
42
* urllib uses shared keep-alive connections, so http
43
operations are substantially faster.
44
(Vincent Ladeuil, #53654)
46
* ``bzr export`` allows an optional branch parameter, to export a bzr
47
tree from some other url. For example:
48
``bzr export bzr.tar.gz http://bazaar-vcs.org/bzr/bzr.dev``
51
* Added ``bzr help topics`` to the bzr help system. This gives a
52
location for general information, outside of a specific command.
53
This includes updates for ``bzr help revisionspec`` the first topic
54
included. (Goffredo Baroncelli, John Arbash Meinel, #42714)
56
* WSGI-compatible HTTP smart server. See ``doc/http_smart_server.txt``.
59
* Knit files will now cache full texts only when the size of the
60
deltas is as large as the size of the fulltext. (Or after 200
61
deltas, whichever comes first). This has the most benefit on large
62
files with small changes, such as the inventory for a large project.
63
(eg For a project with 2500 files, and 7500 revisions, it changes
64
the size of inventory.knit from 11MB to 5.4MB) (John Arbash Meinel)
68
* New -D option given before the command line turns on debugging output
69
for particular areas. -Derror shows tracebacks on all errors.
72
* Clean up ``bzr selftest --benchmark bundle`` to correct an import,
73
and remove benchmarks that take longer than 10min to run.
76
* Use ``time.time()`` instead of ``time.clock()`` to decide on
77
progress throttling. Because ``time.clock()`` is actually CPU time,
78
so over a high-latency connection, too many updates get throttled.
81
* ``MemoryTransport.list_dir()`` would strip the first character for
82
files or directories in root directory. (John Arbash Meinel)
84
* New ``ChrootTransportDecorator``, accessible via the ``chroot+`` url
85
prefix. It disallows any access to locations above a set URL. (Andrew
90
* ``bzrlib/bzrdir.py`` was directly referencing ``bzrlib.workingtree``,
91
without importing it. This prevented ``bzr upgrade`` from working
92
unless a plugin already imported ``bzrlib.workingtree``
93
(John Arbash Meinel, #70716)
95
* Suppress the traceback on invalid URLs (Vincent Ladeuil, #70803).
97
* Give nicer error message when an http server returns a 403
98
error code. (Vincent Ladeuil, #57644).
100
* When a multi-range http GET request fails, try a single
101
range one. If it fails too, forget about ranges. Remember that until
102
the death of the transport and propagates that to the clones.
103
(Vincent Ladeuil, #62276, #62029).
105
* Handles user/passwords supplied in url from command
106
line (for the urllib implementation). Don't request already
107
known passwords (Vincent Ladeuil, #42383, #44647, #48527)
109
* _KnitIndex.add_versions() dictionary compresses revision ids as they
110
are added. This fixes bug where fetching remote revisions records
111
them as full references rather than integers. (John Arbash Meinel,
114
* ``bzr ignore`` strips trailing slashes in patterns.
115
Also ``bzr ignore`` rejects absolute paths. (Kent Gibson, #4559)
117
* ``bzr ignore`` takes multiple arguments. (Cheuksan Edward Wang, #29488)
119
* mv correctly handles paths that traverse symlinks.
120
(Aaron Bentley, #66964)
122
* Give nicer looking error messages when failing to connect over ssh.
123
(John Arbash Meinel, #49172)
125
* Pushing to a remote branch does not currently update the remote working
126
tree. After a remote push, ``bzr status`` and ``bzr diff`` on the remote
127
machine now show that the working tree is out of date.
128
(Cheuksan Edward Wang #48136)
130
* Use patiencediff instead of difflib for determining deltas to insert
131
into knits. This avoids the O(N^3) behavior of difflib. Patience
132
diff should be O(N^2). (Cheuksan Edward Wang, #65714)
134
* Running ``bzr log`` on nonexistent file gives an error instead of the
135
entire log history. (Cheuksan Edward Wang #50793)
137
* ``bzr cat`` can look up contents of removed or renamed files. If the
138
pathname is ambiguous, i.e. the files in the old and new trees have
139
different id's, the default is the file in the new tree. The user can
140
use "--name-from-revision" to select the file in the old tree.
141
(Cheuksan Edward Wang, #30190)
145
* TestingHTTPRequestHandler really handles the Range header
146
(previously it was ignoring it and returning the whole file,).
152
* Clean up ``bzr selftest --benchmark bundle`` to correct an import,
153
and remove benchmarks that take longer than 10min to run.
156
bzr 0.12rc1 2006-10-23
160
* ``bzr log`` now shows dotted-decimal revision numbers for all revisions,
161
rather than just showing a decimal revision number for revisions on the
162
mainline. These revision numbers are not yet accepted as input into bzr
163
commands such as log, diff etc. (Robert Collins)
165
* revisions can now be specified using dotted-decimal revision numbers.
166
For instance, ``bzr diff -r 1.2.1..1.2.3. (Robert Collins)
168
* ``bzr help commands`` output is now shorter (Aaron Bentley)
170
* New connection: ``bzr+http://`` which supports tunnelling the smart
171
protocol over an HTTP connection. If writing is enabled on the bzr
172
server, then you can write over the http connection.
175
* ``bzr`` now uses lazy importing to reduce the startup time. This has
176
a moderate effect on lots of actions, especially ones that have
177
little to do. For example ``bzr rocks`` time is down to 116ms from
178
283ms. (John Arbash Meinel)
180
* New Registry class to provide name-to-object registry-like support,
181
for example for schemes where plugins can register new classes to
182
do certain tasks (e.g. log formatters). Also provides lazy registration
183
to allow modules to be loaded on request. (John Arbash Meinel, Adeodato
188
* LogFormatter subclasses show now expect the 'revno' parameter to
189
show() to be a string rather than an int. (Robert Collins)
193
* ``TestCase.run_bzr``, ``run_bzr_captured``, and ``run_bzr_subprocess``
194
can take a ``working_dir='foo'`` parameter, which will change directory
195
for the command. (John Arbash Meinel)
197
* ``bzrlib.lazy_regex.lazy_compile`` can be used to create a proxy
198
around a regex, which defers compilation until first use.
201
* ``TestCase.run_bzr_subprocess`` defaults to supplying the
202
``--no-plugins`` parameter to ensure test reproducability, and avoid
203
problems with system-wide installed plugins. (John Arbash Meinel)
205
* Unique tree root ids are now supported. Newly created trees still
206
use the common root id for compatibility with bzr versions before 0.12.
209
* ``WorkingTree.set_root_id(None)`` is now deprecated. Please
210
pass in inventory.ROOT_ID if you want the default root id value.
211
(Robert Collins, John Arbash Meinel)
213
* New method ``WorkingTree.flush()`` which will write the current memory
214
inventory out to disk. At the same time, read_working_inventory will
215
no longer trash the current tree inventory if it has been modified within
216
the current lock, and the tree will now ``flush()`` automatically on
217
``unlock()``. ``WorkingTree.set_root_id()`` has been updated to take
218
advantage of this functionality. (Robert Collins, John Arbash Meinel)
220
* ``bzrlib.tsort.merge_sorted`` now accepts ``generate_revnos``. This
221
parameter will cause it to add another column to its output, which
222
contains the dotted-decimal revno for each revision, as a tuple.
225
* ``LogFormatter.show_merge`` is deprecated in favour of
226
``LogFormatter.show_merge_revno``. (Robert Collins)
230
* Avoid circular imports by creating a deprecated function for
231
``bzrlib.tree.RevisionTree``. Callers should have been using
232
``bzrlib.revisontree.RevisionTree`` anyway. (John Arbash Meinel,
235
* Don't use ``socket.MSG_WAITALL`` as it doesn't exist on all
236
platforms. (Martin Pool, #66356)
238
* Don't require ``Content-Type`` in range responses. Assume they are a
239
single range if ``Content-Type`` does not exist.
240
(John Arbash Meinel, #62473)
242
* bzr branch/pull no longer complain about progress bar cleanup when
243
interrupted during fetch. (Aaron Bentley, #54000)
245
* ``WorkingTree.set_parent_trees()`` uses the trees to directly write
246
the basis inventory, rather than going through the repository. This
247
allows us to have 1 inventory read, and 2 inventory writes when
248
committing a new tree. (John Arbash Meinel)
250
* When reverting, files that are not locally modified that do not exist
251
in the target are deleted, not just unversioned (Aaron Bentley)
253
* When trying to acquire a lock, don't fail immediately. Instead, try
254
a few times (up to 1 hour) before timing out. Also, report why the
255
lock is unavailable (John Arbash Meinel, #43521, #49556)
257
* Leave HttpTransportBase daughter classes decides how they
258
implement cloning. (Vincent Ladeuil, #61606)
260
* diff3 does not indicate conflicts on clean merge. (Aaron Bentley)
262
* If a commit fails, the commit message is stored in a file at the root of
263
the tree for later commit. (Cheuksan Edward Wang, Stefan Metzmacher,
268
* New test base class TestCaseWithMemoryTransport offers memory-only
269
testing facilities: its not suitable for tests that need to mutate disk
270
state, but most tests should not need that and should be converted to
271
TestCaseWithMemoryTransport. (Robert Collins)
273
* ``TestCase.make_branch_and_memory_tree`` now takes a format
274
option to set the BzrDir, Repository and Branch formats of the
275
created objects. (Robert Collins, John Arbash Meinel)
279
* Smart server transport test failures on windows fixed. (Lukáš Lalinský).
281
bzr 0.11rc2 2006-09-27
285
* Test suite hangs on windows fixed. (Andrew Bennets, Alexander Belchenko).
287
* Commit performance regression fixed. (Aaron Bentley, Robert Collins, John
290
bzr 0.11rc1 2006-09-25
294
* Knit files now wait to create their contents until the first data is
295
added. The old code used to create an empty .knit and a .kndx with just
296
the header. However, this caused a lot of extra round trips over sftp.
297
This can change the time for ``bzr push`` to create a new remote branch
298
from 160s down to 100s. This also affects ``bzr commit`` performance when
299
adding new files, ``bzr commit`` on a new kernel-like tree drops from 50s
300
down to 40s (John Arbash Meinel, #44692)
302
* When an entire subtree has been deleted, commit will now report that
303
just the top of the subtree has been deleted, rather than reporting
304
all the individual items. (Robert Collins)
306
* Commit performs one less XML parse. (Robert Collins)
308
* ``bzr checkout`` now operates on readonly branches as well
309
as readwrite branches. This fixes bug #39542. (Robert Collins)
311
* ``bzr bind`` no longer synchronises history with the master branch.
312
Binding should be followed by an update or push to synchronise the
313
two branches. This is closely related to the fix for bug #39542.
316
* ``bzrlib.lazy_import.lazy_import`` function to create on-demand
317
objects. This allows all imports to stay at the global scope, but
318
modules will not actually be imported if they are not used.
321
* Support bzr:// and bzr+ssh:// urls to work with the new RPC-based
322
transport which will be used with the upcoming high-performance smart
323
server. The new command ``bzr serve`` will invoke bzr in server mode,
324
which processes these requests. (Andrew Bennetts, Robert Collins, Martin
327
* New command ``bzr version-info`` which can be used to get a summary
328
of the current state of the tree. This is especially useful as part
329
of a build commands. See ``doc/version_info.txt`` for more information
334
* 'bzr inventory [FILE...]' allows restricting the file list to a
335
specific set of files. (John Arbash Meinel, #3631)
337
* Don't abort when annotating empty files (John Arbash Meinel, #56814)
339
* Add ``Stanza.to_unicode()`` which can be passed to another Stanza
340
when nesting stanzas. Also, add ``read_stanza_unicode`` to handle when
341
reading a nested Stanza. (John Arbash Meinel)
343
* Transform._set_mode() needs to stat the right file.
344
(John Arbash Meinel, #56549)
346
* Raise WeaveFormatError rather than StopIteration when trying to read
347
an empty Weave file. (John Arbash Meinel, #46871)
349
* Don't access e.code for generic URLErrors, only HTTPErrors have .code.
350
(Vincent Ladeuil, #59835)
352
* Handle boundary="" lines properly to allow access through a Squid proxy.
353
(John Arbash Meinel, #57723)
355
* revert now removes newly-added directories (Aaron Bentley, #54172)
357
* ``bzr upgrade sftp://`` shouldn't fail to upgrade v6 branches if there
358
isn't a working tree. (David Allouche, #40679)
360
* Give nicer error messages when a user supplies an invalid --revision
361
parameter. (John Arbash Meinel, #55420)
363
* Handle when LANG is not recognized by python. Emit a warning, but
364
just revert to using 'ascii'. (John Arbash Meinel, #35392)
366
* Don't use preexec_fn on win32, as it is not supported by subprocess.
369
* Skip specific tests when the dependencies aren't met. This includes
370
some ``setup.py`` tests when ``python-dev`` is not available, and
371
some tests that depend on paramiko. (John Arbash Meinel, Mattheiu Moy)
373
* Fallback to Paramiko properly, if no ``ssh`` executable exists on
374
the system. (Andrew Bennetts, John Arbash Meinel)
376
* ``Branch.bind(other_branch)`` no longer takes a write lock on the
377
other branch, and will not push or pull between the two branches.
378
API users will need to perform a push or pull or update operation if they
379
require branch synchronisation to take place. (Robert Collins, #47344)
381
* When creating a tarball or zipfile export, export unicode names as utf-8
382
paths. This may not work perfectly on all platforms, but has the best
383
chance of working in the common case. (John Arbash Meinel, #56816)
385
* When committing, only files that exist in working tree or basis tree
386
may be specified (Aaron Bentley, #50793)
390
* Fixes to run on Python 2.5 (Brian M. Carlson, Martin Pool, Marien Zwart)
394
* TestCaseInTempDir now creates a separate directory for HOME, rather
395
than having HOME set to the same location as the working directory.
398
* run_bzr_subprocess() can take an optional 'env_changes={}' parameter,
399
which will update os.environ inside the spawned child. It also can
400
take a 'universal_newlines=True', which helps when checking the output
401
of the command. (John Arbash Meinel)
403
* Refactor SFTP vendors to allow easier re-use when ssh is used.
406
* Transport.list_dir() and Transport.iter_files_recursive() should always
407
return urlescaped paths. This is now tested (there were bugs in a few
408
of the transports) (Andrew Bennetts, David Allouche, John Arbash Meinel)
410
* New utility function symbol_versioning.deprecation_string. Returns the
411
formatted string for a callable, deprecation format pair. (Robert Collins)
413
* New TestCase helper applyDeprecated. This allows you to call a callable
414
which is deprecated without it spewing to the screen, just by supplying
415
the deprecation format string issued for it. (Robert Collins)
417
* Transport.append and Transport.put have been deprecated in favor of
418
.append_bytes, .append_file, .put_bytes, and .put_file. This removes the
419
ambiguity in what type of object the functions take.
420
Transport.non_atomic_put_{bytes,file} has also been added. Which works
421
similarly to Transport.append() except for SFTP, it doesn't have a round
422
trip when opening the file. Also, it provides functionality for creating
423
a parent directory when trying to create a file, rather than raise
424
NoSuchFile and forcing the caller to repeat their request.
427
* WorkingTree has a new api ``unversion`` which allow the unversioning of
428
entries by their file id. (Robert Collins)
430
* WorkingTree.pending_merges is deprecated. Please use the get_parent_ids
431
(introduced in 0.10) method instead. (Robert Collins)
433
* WorkingTree has a new lock_tree_write method which locks the branch for
434
read rather than write. This is appropriate for actions which only need
435
the branch data for reference rather than mutation. A new decorator
436
needs_tree_write_lock is provided in the workingtree module. Like the
437
needs_read_lock and needs_write_lock decorators this allows static
438
declaration of the locking requirements of a function to ensure that
439
a lock is taken out for casual scripts. (Robert Collins, #54107)
441
* All WorkingTree methods which write to the tree, but not to the branch
442
have been converted to use ``needs_tree_write_lock`` rather than
443
``needs_write_lock``. Also converted is the revert, conflicts and tree
444
transform modules. This provides a modest performance improvement on
445
metadir style trees, due to the reduce lock-acquisition, and a more
446
significant performance improvement on lightweight checkouts from
447
remote branches, where trivial operations used to pay a significant
448
penalty. It also provides the basis for allowing readonly checkouts.
451
* Special case importing the standard library 'copy' module. This shaves
452
off 40ms of startup time, while retaining compatibility. See:
453
``bzrlib/inspect_for_copy.py`` for more details. (John Arbash Meinel)
455
* WorkingTree has a new parent class MutableTree which represents the
456
specialisations of Tree which are able to be altered. (Robert Collins)
458
* New methods mkdir and put_file_bytes_non_atomic on MutableTree that
459
mutate the tree and its contents. (Robert Collins)
461
* Transport behaviour at the root of the URL is now defined and tested.
462
(Andrew Bennetts, Robert Collins)
466
* New test helper classs MemoryTree. This is typically accessed via
467
``self.make_branch_and_memory_tree()`` in test cases. (Robert Collins)
469
* Add start_bzr_subprocess and stop_bzr_subprocess to allow test code to
470
continue running concurrently with a subprocess of bzr. (Andrew Bennetts,
473
* Add a new method ``Transport.get_smart_client()``. This is provided to
474
allow upgrades to a richer interface than the VFS one provided by
475
Transport. (Andrew Bennetts, Martin Pool)
480
* 'merge' now takes --uncommitted, to apply uncommitted changes from a
481
tree. (Aaron Bentley)
483
* 'bzr add --file-ids-from' can be used to specify another path to use
484
for creating file ids, rather than generating all new ones. Internally,
485
the 'action' passed to smart_add_tree() can return file_ids that
486
will be used, rather than having bzrlib generate new ones.
487
(John Arbash Meinel, #55781)
489
* ``bzr selftest --benchmark`` now allows a ``--cache-dir`` parameter.
490
This will cache some of the intermediate trees, and decrease the
491
setup time for benchmark tests. (John Arbash Meinel)
493
* Inverse forms are provided for all boolean options. For example,
494
--strict has --no-strict, --no-recurse has --recurse (Aaron Bentley)
496
* Serialize out Inventories directly, rather than using ElementTree.
497
Writing out a kernel sized inventory drops from 2s down to ~350ms.
498
(Robert Collins, John Arbash Meinel)
502
* Help diffutils 2.8.4 get along with binary tests (Marien Zwart: #57614)
504
* Change LockDir so that if the lock directory doesn't exist when
505
lock_write() is called, an attempt will be made to create it.
506
(John Arbash Meinel, #56974)
508
* ``bzr uncommit`` preserves pending merges. (John Arbash Meinel, #57660)
510
* Active FTP transport now works as intended. (ghozzy, #56472)
512
* Really fix mutter() so that it won't ever raise a UnicodeError.
513
It means it is possible for ~/.bzr.log to contain non UTF-8 characters.
514
But it is a debugging log, not a real user file.
515
(John Arbash Meinel, #56947, #53880)
517
* Change Command handle to allow Unicode command and options.
518
At present we cannot register Unicode command names, so we will get
519
BzrCommandError('unknown command'), or BzrCommandError('unknown option')
520
But that is better than a UnicodeError + a traceback.
521
(John Arbash Meinel, #57123)
523
* Handle TZ=UTC properly when reading/writing revisions.
524
(John Arbash Meinel, #55783, #56290)
526
* Use GPG_TTY to allow gpg --cl to work with gpg-agent in a pipeline,
527
(passing text to sign in on stdin). (John Arbash Meinel, #54468)
529
* External diff does the right thing for binaries even in foreign
530
languages. (John Arbash Meinel, #56307)
532
* Testament handles more cases when content is unicode. Specific bug was
533
in handling of revision properties. (John Arbash Meinel, Holger Krekel,
536
* The bzr selftest was failing on installed versions due to a bug in a new
537
test helper. (John Arbash Meinel, Robert Collins, #58057)
541
* ``bzrlib.cache_utf8`` contains ``encode()`` and ``decode()`` functions
542
which can be used to cache the conversion between utf8 and Unicode.
543
Especially helpful for some of the knit annotation code, which has to
544
convert revision ids to utf8 to annotate lines in storage.
547
* ``setup.py`` now searches the filesystem to find all packages which
548
need to be installed. This should help make the life of packagers
549
easier. (John Arbash Meinel)
555
* The hard-coded built-in ignore rules have been removed. There are
556
now two rulesets which are enforced. A user global one in
557
~/.bazaar/ignore which will apply to every tree, and the tree
558
specific one '.bzrignore'.
559
~/.bazaar/ignore will be created if it does not exist, but with
560
a more conservative list than the old default.
561
This fixes bugs with default rules being enforced no matter what.
562
The old list of ignore rules from bzr is available by
563
running 'bzr ignore --old-default-rules'.
564
(Robert Collins, Martin Pool, John Arbash Meinel)
566
* 'branches.conf' has been changed to 'locations.conf', since it can apply
567
to more locations than just branch locations.
572
* The revision specifier "revno:" is extended to accept the syntax
573
revno:N:branch. For example,
574
revno:42:http://bazaar-vcs.org/bzr/bzr.dev/ means revision 42 in
575
bzr.dev. (Matthieu Moy)
577
* Tests updates to ensure proper URL handling, UNICODE support, and
578
proper printing when the user's terminal encoding cannot display
579
the path of a file that has been versioned.
580
``bzr branch`` can take a target URL rather than only a local directory.
581
Branch.get_parent()/set_parent() now save a relative path if possible,
582
and normalize the parent based on root, allowing access across
583
different transports. (John Arbash Meinel, Wouter van Heyst, Martin Pool)
584
(Malone #48906, #42699, #40675, #5281, #3980, #36363, #43689,
587
* On Unix, detect terminal width using an ioctl not just $COLUMNS.
588
Use terminal width for single-line logs from ``bzr log --line`` and
589
pending-merge display. (Robert Widhopf-Fenk, Gustavo Niemeyer)
592
* On Windows, detect terminal width using GetConsoleScreenBufferInfo.
593
(Alexander Belchenko)
595
* Speedup improvement for 'date:'-revision search. (Guillaume Pinot).
597
* Show the correct number of revisions pushed when pushing a new branch.
600
* 'bzr selftest' now shows a progress bar with the number of tests, and
601
progress made. 'make check' shows tests in -v mode, to be more useful
602
for the PQM status window. (Robert Collins).
603
When using a progress bar, failed tests are printed out, rather than
604
being overwritten by the progress bar until the suite finishes.
607
* 'bzr selftest --benchmark' will run a new benchmarking selftest.
608
'bzr selftest --benchmark --lsprof-timed' will use lsprofile to generate
609
profile data for the individual profiled calls, allowing for fine
610
grained analysis of performance.
611
(Robert Collins, Martin Pool).
613
* 'bzr commit' shows a progress bar. This is useful for commits over sftp
614
where commit can take an appreciable time. (Robert Collins)
616
* 'bzr add' is now less verbose in telling you what ignore globs were
617
matched by files being ignored. Instead it just tells you how many
618
were ignored (because you might reasonably be expecting none to be
619
ignored). 'bzr add -v' is unchanged and will report every ignored
620
file. (Robert Collins).
622
* ftp now has a test server if medusa is installed. As part of testing,
623
ftp support has been improved, including support for supplying a
624
non-standard port. (John Arbash Meinel).
626
* 'bzr log --line' shows the revision number, and uses only the
627
first line of the log message (#5162, Alexander Belchenko;
630
* 'bzr status' has had the --all option removed. The 'bzr ls' command
631
should be used to retrieve all versioned files. (Robert Collins)
633
* 'bzr bundle OTHER/BRANCH' will create a bundle which can be sent
634
over email, and applied on the other end, while maintaining ancestry.
635
This bundle can be applied with either 'bzr merge' or 'bzr pull',
636
the same way you would apply another branch.
637
(John Arbash Meinel, Aaron Bentley)
639
* 'bzr whoami' can now be used to set your identity from the command line,
640
for a branch or globally. (Robey Pointer)
642
* 'bzr checkout' now aliased to 'bzr co', and 'bzr annotate' to 'bzr ann'.
645
* 'bzr revert DIRECTORY' now reverts the contents of the directory as well.
648
* 'bzr get sftp://foo' gives a better error when paramiko is not present.
649
Also updates things like 'http+pycurl://' if pycurl is not present.
650
(John Arbash Meinel) (Malone #47821, #52204)
652
* New env variable BZR_PROGRESS_BAR, sets the default progress bar type.
653
Can be set to 'none' or 'dummy' to disable the progress bar, 'dots' or
654
'tty' to create the respective type. (John Arbash Meinel, #42197, #51107)
656
* Improve the help text for 'bzr diff' to explain what various options do.
657
(John Arbash Meinel, #6391)
659
* 'bzr uncommit -r 10' now uncommits revisions 11.. rather than uncommitting
660
revision 10. This makes -r10 more in line with what other commands do.
661
'bzr uncommit' also now saves the pending merges of the revisions that
662
were removed. So it is safe to uncommit after a merge, fix something,
663
and commit again. (John Arbash Meinel, #32526, #31426)
665
* 'bzr init' now also works on remote locations.
666
(Wouter van Heyst, #48904)
668
* HTTP support has been updated. When using pycurl we now support
669
connection keep-alive, which reduces dns requests and round trips.
670
And for both urllib and pycurl we support multi-range requests,
671
which decreases the number of round-trips. Performance results for
672
``bzr branch http://bazaar-vcs.org/bzr/bzr.dev/`` indicate
673
http branching is now 2-3x faster, and ``bzr pull`` in an existing
674
branch is as much as 4x faster.
675
(Michael Ellerman, Johan Rydberg, John Arbash Meinel, #46768)
677
* Performance improvements for sftp. Branching and pulling are now up to
678
2x faster. Utilize paramiko.readv() support for async requests if it
679
is available (paramiko > 1.6) (John Arbash Meinel)
683
* Fix shadowed definition of TestLocationConfig that caused some
684
tests not to run. (#32587, Erik Bågfors, Michael Ellerman,
687
* Fix unnecessary requirement of sign-my-commits that it be run from
688
a working directory. (Martin Pool, Robert Collins)
690
* 'bzr push location' will only remember the push location if it succeeds
691
in connecting to the remote location. (#49742, John Arbash Meinel)
693
* 'bzr revert' no longer toggles the executable bit on win32
694
(#45010, John Arbash Meinel)
696
* Handle broken pipe under win32 correctly. (John Arbash Meinel)
698
* sftp tests now work correctly on win32 if you have a newer paramiko
701
* Cleanup win32 test suite, and general cleanup of places where
702
file handles were being held open. (John Arbash Meinel)
704
* When specifying filenames for 'diff -r x..y', the name of the file in the
705
working directory can be used, even if its name is different in both x
708
* File-ids containing single- or double-quotes are handled correctly by
709
push. (#52227, Aaron Bentley)
711
* Normalize unicode filenames to ensure cross-platform consistency.
712
(John Arbash Meinel, #43689)
714
* The argument parser can now handle '-' as an argument. Currently
715
no code interprets it specially (it is mostly handled as a file named
716
'-'). But plugins, and future operations can use it.
717
(John Arbash meinel, #50984)
719
* Bundles can properly read binary files with a plain '\r' in them.
720
(John Arbash Meinel, #51927)
722
* Tuning iter_entries() to be more efficient (John Arbash Meinel, #5444)
724
* Lots of win32 fixes (the test suite passes again).
725
(John Arbash Meinel, #50155)
727
* Handle openbsd returning None for sys.getfilesystemencoding() (#41183)
729
* Support ftp APPE (append) to allow Knits to be used over ftp (#42592)
731
* Removals are only committed if they match the filespec (or if there is
732
no filespec). (#46635, Aaron Bentley)
734
* smart-add recurses through all supplied directories
735
(John Arbash Meinel, #52578)
737
* Make the bundle reader extra lines before and after the bundle text.
738
This allows you to parse an email with the bundle inline.
739
(John Arbash Meinel, #49182)
741
* Change the file id generator to squash a little bit more. Helps when
742
working with long filenames on windows. (Also helps for unicode filenames
743
not generating hidden files). (John Arbash Meinel, #43801)
745
* Restore terminal mode on C-c while reading sftp password. (#48923,
746
Nicholas Allen, Martin Pool)
748
* Timestamps are rounded to 1ms, and revision entries can be recreated
749
exactly. (John Arbash Meinel, Jamie Wilkinson, #40693)
751
* Branch.base has changed to a URL, but ~/.bazaar/locations.conf should
752
use local paths, since it is user visible (John Arbash Meinel, #53653)
754
* ``bzr status foo`` when foo was unversioned used to cause a full delta
755
to be generated (John Arbash Meinel, #53638)
757
* When reading revision properties, an empty value should be considered
758
the empty string, not None (John Arbash Meinel, #47782)
760
* ``bzr diff --diff-options`` can now handle binary files being changed.
761
Also, the output is consistent when --diff-options is not supplied.
762
(John Arbash Meinel, #54651, #52930)
764
* Use the right suffixes for loading plugins (John Arbash Meinel, #51810)
766
* Fix Branch.get_parent() to handle the case when the parent is not
767
accessible (John Arbash Meinel, #52976)
771
* Combine the ignore rules into a single regex rather than looping over
772
them to reduce the threshold where N^2 behaviour occurs in operations
773
like status. (Jan Hudec, Robert Collins).
775
* Appending to bzrlib.DEFAULT_IGNORE is now deprecated. Instead, use
776
one of the add functions in bzrlib.ignores. (John Arbash Meinel)
778
* 'bzr push' should only push the ancestry of the current revision, not
779
all of the history in the repository. This is especially important for
780
shared repositories. (John Arbash Meinel)
782
* bzrlib.delta.compare_trees now iterates in alphabetically sorted order,
783
rather than randomly walking the inventories. (John Arbash Meinel)
785
* Doctests are now run in temporary directories which are cleaned up when
786
they finish, rather than using special ScratchDir/ScratchBranch objects.
789
* Split ``check`` into separate methods on the branch and on the repository,
790
so that it can be specialized in ways that are useful or efficient for
791
different formats. (Martin Pool, Robert Collins)
793
* Deprecate Repository.all_revision_ids; most methods don't really need
794
the global revision graph but only that part leading up to a particular
795
revision. (Martin Pool, Robert Collins)
797
* Add a BzrDirFormat control_formats list which allows for control formats
798
that do not use '.bzr' to store their data - i.e. '.svn', '.hg' etc.
799
(Robert Collins, Jelmer Vernooij).
801
* bzrlib.diff.external_diff can be redirected to any file-like object.
802
Uses subprocess instead of spawnvp.
803
(#4047, #48914, James Henstridge, John Arbash Meinel)
805
* New command line option '--profile-imports', which will install a custom
806
importer to log time to import modules and regex compilation time to
807
sys.stderr (John Arbash Meinel)
809
* 'EmptyTree' is now deprecated, please use repository.revision_tree(None)
810
instead. (Robert Collins)
812
* "RevisionTree" is now in bzrlib/revisiontree.py. (Robert Collins)
818
* setup.py failed to install launchpad plugin. (Martin Pool)
824
* Fix failure to commit a merge in a checkout. (Martin Pool,
825
Robert Collins, Erik Bågfors, #43959)
827
* Nicer messages from 'commit' in the case of renames, and correct
828
messages when a merge has occured. (Robert Collins, Martin Pool)
830
* Separate functionality from assert statements as they are skipped in
831
optimized mode of python. Add the same check to pending merges.
832
(#44443, Olaf Conradi)
836
* Do not show the None revision in output of bzr ancestry. (Olaf Conradi)
838
* Add info on standalone branches without a working tree.
839
(#44155, Olaf Conradi)
841
* Fix bug in knits when raising InvalidRevisionId. (#44284, Olaf Conradi)
845
* Make editor invocation comply with Debian Policy. First check
846
environment variables VISUAL and EDITOR, then try editor from
847
alternatives system. If that all fails, fall back to the pre-defined
848
list of editors. (#42904, Olaf Conradi)
852
* New 'register-branch' command registers a public branch into
853
Launchpad.net, where it can be associated with bugs, etc.
854
(Martin Pool, Bjorn Tillenius, Robert Collins)
858
* New public api in InventoryEntry - 'describe_change(old, new)' which
859
provides a human description of the changes between two old and
860
new. (Robert Collins, Martin Pool)
864
* Fix test case for bzr info in upgrading a standalone branch to metadir,
865
uses bzrlib api now. (Olaf Conradi)
869
NOTES WHEN UPGRADING:
871
Release 0.8 of bzr introduces a new format for history storage, called
872
'knit', as an evolution of to the 'weave' format used in 0.7. Local
873
and remote operations are faster using knits than weaves. Several
874
operations including 'init', 'init-repo', and 'upgrade' take a
875
--format option that controls this. Branching from an existing branch
876
will keep the same format.
878
It is possible to merge, pull and push between branches of different
879
formats but this is slower than moving data between homogenous
880
branches. It is therefore recommended (but not required) that you
881
upgrade all branches for a project at the same time. Information on
882
formats is shown by 'bzr info'.
884
bzr 0.8 now allows creation of 'repositories', which hold the history
885
of files and revisions for several branches. Previously bzr kept all
886
the history for a branch within the .bzr directory at the root of the
887
branch, and this is still the default. To create a repository, use
888
the new 'bzr init-repo' command. Branches exist as directories under
889
the repository and contain just a small amount of information
890
indicating the current revision of the branch.
892
bzr 0.8 also supports 'checkouts', which are similar to in cvs and
893
subversion. Checkouts are associated with a branch (optionally in a
894
repository), which contains all the historical information. The
895
result is that a checkout can be deleted without losing any
896
already-committed revisions. A new 'update' command is also available.
898
Repositories and checkouts are not supported with the 0.7 storage
899
format. To use them you must upgrad to either knits, or to the
900
'metaweave' format, which uses weaves but changes the .bzr directory
906
* Sftp paths can now be relative, or local, according to the lftp
907
convention. Paths now take the form:
908
sftp://user:pass@host:port/~/relative/path
910
sftp://user:pass@host:port/absolute/path
912
* The FTP transport now tries to reconnect after a temporary
913
failure. ftp put is made atomic. (Matthieu Moy)
915
* The FTP transport now maintains a pool of connections, and
916
reuses them to avoid multiple connections to the same host (like
917
sftp did). (Daniel Silverstone)
919
* The bzr_man.py file has been removed. To create the man page now,
920
use ./generate_docs.py man. The new program can also create other files.
921
Run "python generate_docs.py --help" for usage information. (Hans
922
Ulrich Niedermann & James Blackwell).
924
* Man Page now gives full help (James Blackwell). Help also updated to
925
reflect user config now being stored in .bazaar (Hans Ulrich
928
* It's now possible to set aliases in bazaar.conf (Erik Bågfors)
930
* Pull now accepts a --revision argument (Erik Bågfors)
932
* 'bzr re-sign' now allows multiple revisions to be supplied on the command
933
line. You can now use the following command to sign all of your old commits.
934
find .bzr/revision-store// -name my@email-* \
935
| sed 's/.*\/\/..\///' \
938
* Upgrade can now upgrade over the network. (Robert Collins)
940
* Two new commands 'bzr checkout' and 'bzr update' allow for CVS/SVN-alike
941
behaviour. By default they will cache history in the checkout, but
942
with --lightweight almost all data is kept in the master branch.
945
* 'revert' unversions newly-versioned files, instead of deleting them.
947
* 'merge' is more robust. Conflict messages have changed.
949
* 'merge' and 'revert' no longer clobber existing files that end in '~' or
952
* Default log format can be set in configuration and plugins can register
953
their own formatters. (Erik Bågfors)
955
* New 'reconcile' command will check branch consistency and repair indexes
956
that can become out of sync in pre 0.8 formats. (Robert Collins,
959
* New 'bzr init --format' and 'bzr upgrade --format' option to control
960
what storage format is created or produced. (Robert Collins,
963
* Add parent location to 'bzr info', if there is one. (Olaf Conradi)
965
* New developer commands 'weave-list' and 'weave-join'. (Martin Pool)
967
* New 'init-repository' command, plus support for repositories in 'init'
968
and 'branch' (Aaron Bentley, Erik Bågfors, Robert Collins)
970
* Improve output of 'info' command. Show all relevant locations related to
971
working tree, branch and repository. Use kibibytes for binary quantities.
972
Fix off-by-one error in missing revisions of working tree. Make 'info'
973
work on branches, repositories and remote locations. Show locations
974
relative to the shared repository, if applicable. Show locking status
975
of locations. (Olaf Conradi)
977
* Diff and merge now safely handle binary files. (Aaron Bentley)
979
* 'pull' and 'push' now normalise the revision history, so that any two
980
branches with the same tip revision will have the same output from 'log'.
983
* 'merge' accepts --remember option to store parent location, like 'push'
984
and 'pull'. (Olaf Conradi)
986
* bzr status and diff when files given as arguments do not exist
987
in the relevant trees. (Martin Pool, #3619)
989
* Add '.hg' to the default ignore list. (Martin Pool)
991
* 'knit' is now the default disk format. This improves disk performance and
992
utilization, increases incremental pull performance, robustness with SFTP
993
and allows checkouts over SFTP to perform acceptably.
994
The initial Knit code was contributed by Johan Rydberg based on a
995
specification by Martin Pool.
996
(Robert Collins, Aaron Bentley, Johan Rydberg, Martin Pool).
998
* New tool to generate all-in-one html version of the manual. (Alexander
1001
* Hitting CTRL-C while doing an SFTP push will no longer cause stale locks
1002
to be left in the SFTP repository. (Robert Collins, Martin Pool).
1004
* New option 'diff --prefix' to control how files are named in diff
1005
output, with shortcuts '-p0' and '-p1' corresponding to the options for
1006
GNU patch. (Alexander Belchenko, Goffredo Baroncelli, Martin Pool)
1008
* Add --revision option to 'annotate' command. (Olaf Conradi)
1010
* If bzr shows an unexpected revision-history after pulling (perhaps due
1011
to a reweave) it can now be corrected by 'bzr reconcile'.
1016
* Commit is now verbose by default, and shows changed filenames and the
1017
new revision number. (Robert Collins, Martin Pool)
1019
* Unify 'mv', 'move', 'rename'. (#5379, Matthew Fuller)
1021
* 'bzr -h' shows help. (#35940, Martin Pool, Ian Bicking)
1023
* Make 'pull' and 'push' remember location on failure using --remember.
1026
* For compatibility, make old format for using weaves inside metadir
1027
available as 'metaweave' format. Rename format 'metadir' to 'default'.
1028
Clean up help for option --format in commands 'init', 'init-repo' and
1029
'upgrade'. (Olaf Conradi)
1033
* The internal storage of history, and logical branch identity have now
1034
been split into Branch, and Repository. The common locking and file
1035
management routines are now in bzrlib.lockablefiles.
1036
(Aaron Bentley, Robert Collins, Martin Pool)
1038
* Transports can now raise DependencyNotPresent if they need a library
1039
which is not installed, and then another implementation will be
1040
tried. (Martin Pool)
1042
* Remove obsolete (and no-op) `decode` parameter to `Transport.get`.
1045
* Using Tree Transform for merge, revert, tree-building
1047
* WorkingTree.create, Branch.create, WorkingTree.create_standalone,
1048
Branch.initialize are now deprecated. Please see BzrDir.create_* for
1049
replacement API's. (Robert Collins)
1051
* New BzrDir class represents the .bzr control directory and manages
1052
formatting issues. (Robert Collins)
1054
* New repository.InterRepository class encapsulates Repository to
1055
Repository actions and allows for clean selection of optimised code
1056
paths. (Robert Collins)
1058
* bzrlib.fetch.fetch and bzrlib.fetch.greedy_fetch are now deprecated,
1059
please use 'branch.fetch' or 'repository.fetch' depending on your
1060
needs. (Robert Collins)
1062
* deprecated methods now have a 'is_deprecated' flag on them that can
1063
be checked, if you need to determine whether a given callable is
1064
deprecated at runtime. (Robert Collins)
1066
* Progress bars are now nested - see
1067
bzrlib.ui.ui_factory.nested_progress_bar. (Robert Collins, Robey Pointer)
1069
* New API call get_format_description() for each type of format.
1072
* Changed branch.set_parent() to accept None to remove parent.
1075
* Deprecated BzrError AmbiguousBase. (Olaf Conradi)
1077
* WorkingTree.branch is now a read only property. (Robert Collins)
1079
* bzrlib.ui.text.TextUIFactory now accepts a bar_type parameter which
1080
can be None or a factory that will create a progress bar. This is
1081
useful for testing or for overriding the bzrlib.progress heuristic.
1084
* New API method get_physical_lock_status() to query locks present on a
1085
transport. (Olaf Conradi)
1087
* Repository.reconcile now takes a thorough keyword parameter to allow
1088
requesting an indepth reconciliation, rather than just a data-loss
1089
check. (Robert Collins)
1091
* bzrlib.ui.ui_factory protocol now supports 'get_boolean' to prompt
1092
the user for yes/no style input. (Robert Collins)
1096
* SFTP tests now shortcut the SSH negotiation, reducing test overhead
1097
for testing SFTP protocol support. (Robey Pointer)
1099
* Branch formats are now tested once per implementation (see bzrlib.
1100
tests.branch_implementations. This is analagous to the transport
1101
interface tests, and has been followed up with working tree,
1102
repository and BzrDir tests. (Robert Collins)
1104
* New test base class TestCaseWithTransport provides a transport aware
1105
test environment, useful for testing any transport-interface using
1106
code. The test suite option --transport controls the transport used
1107
by this class (when its not being used as part of implementation
1108
contract testing). (Robert Collins)
1110
* Close logging handler on disabling the test log. This will remove the
1111
handler from the internal list inside python's logging module,
1112
preventing shutdown from closing it twice. (Olaf Conradi)
1114
* Move test case for uncommit to blackbox tests. (Olaf Conradi)
1116
* run_bzr and run_bzr_captured now accept a 'stdin="foo"' parameter which
1117
will provide String("foo") to the command as its stdin.
1123
* .bzrignore is excluded from exports, on the grounds that it's a bzr
1124
internal-use file and may not be wanted. (Jamie Wilkinson)
1126
* The "bzr directories" command were removed in favor of the new
1127
--kind option to the "bzr inventory" command. To list all
1128
versioned directories, now use "bzr inventory --kind directory".
1131
* Under Windows configuration directory is now %APPDATA%\bazaar\2.0
1132
by default. (John Arbash Meinel)
1134
* The parent of Bzr configuration directory can be set by BZR_HOME
1135
environment variable. Now the path for it is searched in BZR_HOME, then
1136
in HOME. Under Windows the order is: BZR_HOME, APPDATA (usually
1137
points to C:\Documents and Settings\User Name\Application Data), HOME.
1138
(John Arbash Meinel)
1140
* Plugins with the same name in different directories in the bzr plugin
1141
path are no longer loaded: only the first successfully loaded one is
1142
used. (Robert Collins)
1144
* Use systems' external ssh command to open connections if possible.
1145
This gives better integration with user settings such as ProxyCommand.
1148
* Permissions on files underneath .bzr/ are inherited from the .bzr
1149
directory. So for a shared repository, simply doing 'chmod -R g+w .bzr/'
1150
will mean that future file will be created with group write permissions.
1152
* configure.in and config.guess are no longer in the builtin default
1155
* '.sw[nop]' pattern ignored, to ignore vim swap files for nameless
1156
files. (John Arbash Meinel, Martin Pool)
1160
* "bzr INIT dir" now initializes the specified directory, and creates
1161
it if it does not exist. (John Arbash Meinel)
1163
* New remerge command (Aaron Bentley)
1165
* Better zsh completion script. (Steve Borho)
1167
* 'bzr diff' now returns 1 when there are changes in the working
1168
tree. (Robert Collins)
1170
* 'bzr push' now exists and can push changes to a remote location.
1171
This uses the transport infrastructure, and can store the remote
1172
location in the ~/.bazaar/branches.conf configuration file.
1175
* Test directories are only kept if the test fails and the user requests
1178
* Tweaks to short log printing
1180
* Added branch nicks, new nick command, printing them in log output.
1183
* If $BZR_PDB is set, pop into the debugger when an uncaught exception
1184
occurs. (Martin Pool)
1186
* Accept 'bzr resolved' (an alias for 'bzr resolve'), as this is
1187
the same as Subversion. (Martin Pool)
1189
* New ftp transport support (on ftplib), for ftp:// and aftp://
1190
URLs. (Daniel Silverstone)
1192
* Commit editor temporary files now start with 'bzr_log.', to allow
1193
text editors to match the file name and set up appropriate modes or
1194
settings. (Magnus Therning)
1196
* Improved performance when integrating changes from a remote weave.
1197
(Goffredo Baroncelli)
1199
* Sftp will attempt to cache the connection, so it is more likely that
1200
a connection will be reused, rather than requiring multiple password
1203
* bzr revno now takes an optional argument indicating the branch whose
1204
revno should be printed. (Michael Ellerman)
1206
* bzr cat defaults to printing the last version of the file.
1207
(#3632, Matthieu Moy)
1209
* New global option 'bzr --lsprof COMMAND' runs bzr under the lsprof
1210
profiler. (Denys Duchier)
1212
* Faster commits by reading only the headers of affected weave files.
1215
* 'bzr add' now takes a --dry-run parameter which shows you what would be
1216
added, but doesn't actually add anything. (Michael Ellerman)
1218
* 'bzr add' now lists how many files were ignored per glob. add --verbose
1219
lists the specific files. (Aaron Bentley)
1221
* 'bzr missing' now supports displaying changes in diverged trees and can
1222
be limited to show what either end of the comparison is missing.
1223
(Aaron Bently, with a little prompting from Daniel Silverstone)
1227
* SFTP can walk up to the root path without index errors. (Robert Collins)
1229
* Fix bugs in running bzr with 'python -O'. (Martin Pool)
1231
* Error when run with -OO
1233
* Fix bug in reporting http errors that don't have an http error code.
1236
* Handle more cases of pipe errors in display commands
1238
* Change status to 3 for all errors
1240
* Files that are added and unlinked before committing are completely
1241
ignored by diff and status
1243
* Stores with some compressed texts and some uncompressed texts are now
1244
able to be used. (John A Meinel)
1246
* Fix for bzr pull failing sometimes under windows
1248
* Fix for sftp transport under windows when using interactive auth
1250
* Show files which are both renamed and modified as such in 'bzr
1251
status' output. (#4503, Daniel Silverstone)
1253
* Make annotate cope better with revisions committed without a valid
1254
email address. (Marien Zwart)
1256
* Fix representation of tab characters in commit messages. (Harald
1259
* List of plugin directories in BZR_PLUGIN_PATH environment variable is
1260
now parsed properly under Windows. (Alexander Belchenko)
1262
* Show number of revisions pushed/pulled/merged. (Robey Pointer)
1264
* Keep a cached copy of the basis inventory to speed up operations
1265
that need to refer to it. (Johan Rydberg, Martin Pool)
1267
* Fix bugs in bzr status display of non-ascii characters. (Martin
1270
* Remove Makefile.in from default ignore list. (#6413, Tollef Fog
1273
* Fix failure in 'bzr added'. (Nathan McCallum, Martin Pool)
1277
* Fix selftest asking for passwords when there are no SFTP keys.
1278
(Robey Pointer, Jelmer Vernooij)
1280
* Fix selftest run with 'python -O'. (Martin Pool)
1282
* Fix HTTP tests under Windows. (John Arbash Meinel)
1284
* Make tests work even if HOME is not set (Aaron Bentley)
1286
* Updated build_tree to use fixed line-endings for tests which read
1287
the file cotents and compare. Make some tests use this to pass under
1288
Windows. (John Arbash Meinel)
1290
* Skip stat and symlink tests under Windows. (Alexander Belchenko)
1292
* Delay in selftest/testhashcash is now issued under win32 and Cygwin.
1293
(John Arbash Meinel)
1295
* Use terminal width to align verbose test output. (Martin Pool)
1297
* Blackbox tests are maintained within the bzrlib.tests.blackbox directory.
1298
If adding a new test script please add that to
1299
bzrlib.tests.blackbox.__init__. (Robert Collins)
1301
* Much better error message if one of the test suites can't be
1302
imported. (Martin Pool)
1304
* Make check now runs the test suite twice - once with the default locale,
1305
and once with all locales forced to C, to expose bugs. This is not
1306
trivially done within python, so for now its only triggered by running
1307
Make check. Integrators and packagers who wish to check for full
1308
platform support should run 'make check' to test the source.
1311
* Tests can now run TestSkipped if they can't execute for any reason.
1312
(Martin Pool) (NB: TestSkipped should only be raised for correctable
1313
reasons - see the wiki spec ImprovingBzrTestSuite).
1315
* Test sftp with relative, absolute-in-homedir and absolute-not-in-homedir
1316
paths for the transport tests. Introduce blackbox remote sftp tests that
1317
test the same permutations. (Robert Collins, Robey Pointer)
1319
* Transport implementation tests are now independent of the local file
1320
system, which allows tests for esoteric transports, and for features
1321
not available in the local file system. They also repeat for variations
1322
on the URL scheme that can introduce issues in the transport code,
1323
see bzrlib.transport.TransportTestProviderAdapter() for this.
1326
* TestCase.build_tree uses the transport interface to build trees, pass
1327
in a transport parameter to give it an existing connection.
1332
* WorkingTree.pull has been split across Branch and WorkingTree,
1333
to allow Branch only pulls. (Robert Collins)
1335
* commands.display_command now returns the result of the decorated
1336
function. (Robert Collins)
1338
* LocationConfig now has a set_user_option(key, value) call to save
1339
a setting in its matching location section (a new one is created
1340
if needed). (Robert Collins)
1342
* Branch has two new methods, get_push_location and set_push_location
1343
to respectively, get and set the push location. (Robert Collins)
1345
* commands.register_command now takes an optional flag to signal that
1346
the registrant is planning to decorate an existing command. When
1347
given multiple plugins registering a command is not an error, and
1348
the original command class (whether built in or a plugin based one) is
1349
returned to the caller. There is a new error 'MustUseDecorated' for
1350
signalling when a wrapping command should switch to the original
1351
version. (Robert Collins)
1353
* Some option parsing errors will raise 'BzrOptionError', allowing
1354
granular detection for decorating commands. (Robert Collins).
1356
* Branch.read_working_inventory has moved to
1357
WorkingTree.read_working_inventory. This necessitated changes to
1358
Branch.get_root_id, and a move of Branch.set_inventory to WorkingTree
1359
as well. To make it clear that a WorkingTree cannot always be obtained
1360
Branch.working_tree() will raise 'errors.NoWorkingTree' if one cannot
1361
be obtained. (Robert Collins)
1363
* All pending merges operations from Branch are now on WorkingTree.
1366
* The follow operations from Branch have moved to WorkingTree:
1374
* bzrlib.add.smart_add_branch is now smart_add_tree. (Robert Collins)
1376
* New "rio" serialization format, similar to rfc-822. (Martin Pool)
1378
* Rename selftests to `bzrlib.tests.test_foo`. (John A Meinel, Martin
1381
* bzrlib.plugin.all_plugins has been changed from an attribute to a
1382
query method. (Robert Collins)
1384
* New options to read only the table-of-contents of a weave.
1387
* Raise NoSuchFile when someone tries to add a non-existant file.
1390
* Simplify handling of DivergedBranches in cmd_pull().
1394
* Branch.controlfile* logic has moved to lockablefiles.LockableFiles, which
1395
is exposed as Branch().control_files. Also this has been altered with the
1396
controlfile pre/suffix replaced by simple method names like 'get' and
1397
'put'. (Aaron Bentley, Robert Collins).
1399
* Deprecated functions and methods can now be marked as such using the
1400
bzrlib.symbol_versioning module. Marked method have their docstring
1401
updated and will issue a DeprecationWarning using the warnings module
1402
when they are used. (Robert Collins)
1404
* bzrlib.osutils.safe_unicode now exists to provide parameter coercion
1405
for functions that need unicode strings. (Robert Collins)
1411
* pull now takes --verbose to show you what revisions are added or removed
1414
* merge now takes a --show-base option to include the base text in
1418
* The config files are now read using ConfigObj, so '=' should be used as
1419
a separator, not ':'.
1422
* New 'bzr commit --strict' option refuses to commit if there are
1423
any unknown files in the tree. To commit, make sure all files are
1424
either ignored, added, or deleted. (Michael Ellerman)
1426
* The config directory is now ~/.bazaar, and there is a single file
1427
~/.bazaar/bazaar.conf storing email, editor and other preferences.
1430
* 'bzr add' no longer takes a --verbose option, and a --quiet option
1431
has been added that suppresses all output.
1433
* Improved zsh completion support in contrib/zsh, from Clint
1436
* Builtin 'bzr annotate' command, by Martin Pool with improvements from
1437
Goffredo Baroncelli.
1439
* 'bzr check' now accepts -v for verbose reporting, and checks for
1440
ghosts in the branch. (Robert Collins)
1442
* New command 're-sign' which will regenerate the gpg signature for
1443
a revision. (Robert Collins)
1445
* If you set check_signatures=require for a path in
1446
~/.bazaar/branches.conf then bzr will invoke your
1447
gpg_signing_command (defaults to gpg) and record a digital signature
1448
of your commit. (Robert Collins)
1450
* New sftp transport, based on Paramiko. (Robey Pointer)
1452
* 'bzr pull' now accepts '--clobber' which will discard local changes
1453
and make this branch identical to the source branch. (Robert Collins)
1455
* Just give a quieter warning if a plugin can't be loaded, and
1456
put the details in .bzr.log. (Martin Pool)
1458
* 'bzr branch' will now set the branch-name to the last component of the
1459
output directory, if one was supplied.
1461
* If the option 'post_commit' is set to one (or more) python function
1462
names (must be in the bzrlib namespace), then they will be invoked
1463
after the commit has completed, with the branch and revision_id as
1464
parameters. (Robert Collins)
1466
* Merge now has a retcode of 1 when conflicts occur. (Robert Collins)
1468
* --merge-type weave is now supported for file contents. Tree-shape
1469
changes are still three-way based. (Martin Pool, Aaron Bentley)
1471
* 'bzr check' allows the first revision on revision-history to have
1472
parents - something that is expected for cheap checkouts, and occurs
1473
when conversions from baz do not have all history. (Robert Collins).
1475
* 'bzr merge' can now graft unrelated trees together, if your specify
1476
0 as a base. (Aaron Bentley)
1478
* 'bzr commit branch' and 'bzr commit branch/file1 branch/file2' now work
1481
* Add '.sconsign*' to default ignore list. (Alexander Belchenko)
1483
* 'bzr merge --reprocess' minimizes conflicts
1487
* The 'bzr selftest --pattern' option for has been removed, now
1488
test specifiers on the command line can be simple strings, or
1489
regexps, or both. (Robert Collins)
1491
* Passing -v to selftest will now show the time each test took to
1492
complete, which will aid in analysing performance regressions and
1493
related questions. (Robert Collins)
1495
* 'bzr selftest' runs all tests, even if one fails, unless '--one'
1496
is given. (Martin Pool)
1498
* There is a new method for TestCaseInTempDir, assertFileEqual, which
1499
will check that a given content is equal to the content of the named
1500
file. (Robert Collins)
1502
* Fix test suite's habit of leaving many temporary log files in $TMPDIR.
1507
* New 'testament' command and concept for making gpg-signatures
1508
of revisions that are not tied to a particular internal
1509
representation. (Martin Pool).
1511
* Per-revision properties ('revprops') as key-value associated
1512
strings on each revision created when the revision is committed.
1513
Intended mainly for the use of external tools. (Martin Pool).
1515
* Config options have moved from bzrlib.osutils to bzrlib.config.
1518
* Improved command line option definitions allowing explanations
1519
for individual options, among other things. Contributed by
1522
* Config options have moved from bzrlib.osutils to bzrlib.config.
1523
Configuration is now done via the config.Config interface:
1524
Depending on whether you have a Branch, a Location or no information
1525
available, construct a ``*Config``, and use its ``signature_checking``,
1526
``username`` and ``user_email`` methods. (Robert Collins)
1528
* Plugins are now loaded under bzrlib.plugins, not bzrlib.plugin, and
1529
they are made available for other plugins to use. You should not
1530
import other plugins during the __init__ of your plugin though, as
1531
no ordering is guaranteed, and the plugins directory is not on the
1532
python path. (Robert Collins)
1534
* Branch.relpath has been moved to WorkingTree.relpath. WorkingTree no
1535
no longer takes an inventory, rather it takes an option branch
1536
parameter, and if None is given will open the branch at basedir
1537
implicitly. (Robert Collins)
1539
* Cleaner exception structure and error reporting. Suggested by
1540
Scott James Remnant. (Martin Pool)
1542
* Branch.remove has been moved to WorkingTree, which has also gained
1543
lock_read, lock_write and unlock methods for convenience. (Robert
1546
* Two decorators, needs_read_lock and needs_write_lock have been added
1547
to the branch module. Use these to cause a function to run in a
1548
read or write lock respectively. (Robert Collins)
1550
* Branch.open_containing now returns a tuple (Branch, relative-path),
1551
which allows direct access to the common case of 'get me this file
1552
from its branch'. (Robert Collins)
1554
* Transports can register using register_lazy_transport, and they
1555
will be loaded when first used. (Martin Pool)
1557
* 'pull' has been factored out of the command as WorkingTree.pull().
1558
A new option to WorkingTree.pull has been added, clobber, which will
1559
ignore diverged history and pull anyway.
1562
* config.Config has a 'get_user_option' call that accepts an option name.
1563
This will be looked up in branches.conf and bazaar.conf as normal.
1564
It is intended that this be used by plugins to support options -
1565
options of built in programs should have specific methods on the config.
1568
* merge.merge_inner now has tempdir as an optional parameter. (Robert
1571
* Tree.kind is not recorded at the top level of the hierarchy, as it was
1572
missing on EmptyTree, leading to a bug with merge on EmptyTrees.
1575
* WorkingTree.__del__ has been removed, it was non deterministic and not
1576
doing what it was intended to. See WorkingTree.__init__ for a comment
1577
about future directions. (Robert Collins/Martin Pool)
1579
* bzrlib.transport.http has been modified so that only 404 urllib errors
1580
are returned as NoSuchFile. Other exceptions will propogate as normal.
1581
This allows debuging of actual errors. (Robert Collins)
1583
* bzrlib.transport.Transport now accepts *ONLY* url escaped relative paths
1584
to apis like 'put', 'get' and 'has'. This is to provide consistent
1585
behaviour - it operates on url's only. (Robert Collins)
1587
* Transports can register using register_lazy_transport, and they
1588
will be loaded when first used. (Martin Pool)
1590
* 'merge_flex' no longer calls conflict_handler.finalize(), instead that
1591
is called by merge_inner. This is so that the conflict count can be
1592
retrieved (and potentially manipulated) before returning to the caller
1593
of merge_inner. Likewise 'merge' now returns the conflict count to the
1594
caller. (Robert Collins)
1596
* 'revision.revision_graph can handle having only partial history for
1597
a revision - that is no revisions in the graph with no parents.
1600
* New builtins.branch_files uses the standard file_list rules to produce
1601
a branch and a list of paths, relative to that branch (Aaron Bentley)
1603
* New TestCase.addCleanup facility.
1605
* New bzrlib.version_info tuple (similar to sys.version_info), which can
1606
be used by programs importing bzrlib.
1610
* Better handling of branches in directories with non-ascii names.
1611
(Joel Rosdahl, Panagiotis Papadakos)
1613
* Upgrades of trees with no commits will not fail due to accessing
1614
[-1] in the revision-history. (Andres Salomon)
1617
bzr 0.1.1 2005-10-12
1621
* Fix problem in pulling over http from machines that do not
1622
allow directories to be listed.
1624
* Avoid harmless warning about invalid hash cache after
1625
upgrading branch format.
1629
* Avoid some unnecessary http operations in branch and pull.
1636
* 'bzr branch' over http initially gives a very high estimate
1637
of completion time but it should fall as the first few
1638
revisions are pulled in. branch is still slow on
1639
high-latency connections.
1643
* bzr-man.py has been updated to work again. Contributed by
1646
* Locking is now done with fcntl.lockf which works with NFS
1647
file systems. Contributed by Harald Meland.
1649
* When a merge encounters a file that has been deleted on
1650
one side and modified on the other, the old contents are
1651
written out to foo.BASE and foo.SIDE, where SIDE is this
1652
or OTHER. Contributed by Aaron Bentley.
1654
* Export was choosing incorrect file paths for the content of
1655
the tarball, this has been fixed by Aaron Bentley.
1657
* Commit will no longer commit without a log message, an
1658
error is returned instead. Contributed by Jelmer Vernooij.
1660
* If you commit a specific file in a sub directory, any of its
1661
parent directories that are added but not listed will be
1662
automatically included. Suggested by Michael Ellerman.
1664
* bzr commit and upgrade did not correctly record new revisions
1665
for files with only a change to their executable status.
1666
bzr will correct this when it encounters it. Fixed by
1669
* HTTP tests now force off the use of http_proxy for the duration.
1670
Contributed by Gustavo Niemeyer.
1672
* Fix problems in merging weave-based branches that have
1673
different partial views of history.
1675
* Symlink support: working with symlinks when not in the root of a
1676
bzr tree was broken, patch from Scott James Remnant.
1680
* 'branch' now accepts a --basis parameter which will take advantage
1681
of local history when making a new branch. This allows faster
1682
branching of remote branches. Contributed by Aaron Bentley.
1684
* New tree format based on weave files, called version 5.
1685
Existing branches can be upgraded to this format using
1688
* Symlinks are now versionable. Initial patch by
1689
Erik Toubro Nielsen, updated to head by Robert Collins.
1691
* Executable bits are tracked on files. Patch from Gustavo
1694
* 'bzr status' now shows unknown files inside a selected directory.
1695
Patch from Heikki Paajanen.
1697
* Merge conflicts are recorded in .bzr. Two new commands 'conflicts'
1698
and 'resolve' have needed added, which list and remove those
1699
merge conflicts respectively. A conflicted tree cannot be committed
1700
in. Contributed by Aaron Bentley.
1702
* 'rm' is now an alias for 'remove'.
1704
* Stores now split out their content in a single byte prefixed hash,
1705
dropping the density of files per directory by 256. Contributed by
1708
* 'bzr diff -r branch:URL' will now perform a diff between two branches.
1709
Contributed by Robert Collins.
1711
* 'bzr log' with the default formatter will show merged revisions,
1712
indented to the right. Initial implementation contributed by Gustavo
1713
Niemeyer, made incremental by Robert Collins.
1718
* Test case failures have the exception printed after the log
1719
for your viewing pleasure.
1721
* InventoryEntry is now an abstract base class, use one of the
1722
concrete InventoryDirectory etc classes instead.
1724
* Branch raises an UnsupportedFormatError when it detects a
1725
bzr branch it cannot understand. This allows for precise
1726
handling of such circumstances.
1731
* Removed testsweet module so that tests can be run after
1732
bzr installed by 'bzr selftest'.
1734
* 'bzr selftest' command-line arguments can now be partial ids
1735
of tests to run, e.g. 'bzr selftest test_weave'
1738
bzr 0.0.9 2005-09-23
1742
* Fixed "branch -r" option.
1744
* Fix remote access to branches containing non-compressed history.
1747
* Better reliability of http server tests. (John Arbash-Meinel)
1749
* Merge graph maximum distance calculation fix. (Aaron Bentley)
1751
* Various minor bug in windows support have been fixed, largely in the
1752
test suite. Contributed by Alexander Belchenko.
1756
* Status now accepts a -r argument to give status between chosen
1757
revisions. Contributed by Heikki Paajanen.
1759
* Revision arguments no longer use +/-/= to control ranges, instead
1760
there is a 'before' namespace, which limits the successive namespace.
1761
For example '$ bzr log -r date:yesterday..before:date:today' will
1762
select everything from yesterday and before today. Contributed by
1765
* There is now a bzr.bat file created by distutils when building on
1766
Windows. Contributed by Alexander Belchenko.
1770
* Removed uuid() as it was unused.
1772
* Improved 'fetch' code for pulling revisions from one branch into
1773
another (used by pull, merged, etc.)
1776
bzr 0.0.8 2005-09-20
1780
* Adding a file whose parent directory is not versioned will
1781
implicitly add the parent, and so on up to the root. This means
1782
you should never need to explictly add a directory, they'll just
1783
get added when you add a file in the directory. Contributed by
1786
* Ignore .DS_Store (contains Mac metadata) by default. Patch from
1789
* If you set BZR_EDITOR in the environment, it is checked in
1790
preference to EDITOR and the config file for the interactive commit
1791
editing program. Related to this is a bugfix where a missing program
1792
set in EDITOR would cause editing to fail, now the fallback program
1793
for the operating system is still tried.
1795
* Files that are not directories/symlinks/regular files will no longer
1796
cause bzr to fail, it will just ignore them by default. You cannot add
1797
them to the tree though - they are not versionable.
1802
* Refactor xml packing/unpacking.
1806
* Fixed 'bzr mv' by Ollie Rutherfurd.
1808
* Fixed strange error when trying to access a nonexistent http
1811
* Make sure that the hashcache gets written out if it can't be
1817
* Various Windows fixes from Ollie Rutherfurd.
1819
* Quieten warnings about locking; patch from Matt Lavin.
1822
bzr-0.0.7 2005-09-02
1826
* ``bzr shell-complete`` command contributed by Clint Adams to
1827
help with intelligent shell completion.
1829
* New expert command ``bzr find-merge-base`` for debugging merges.
1834
* Much better merge support.
1836
* merge3 conflicts are now reported with markers like '<<<<<<<'
1837
(seven characters) which is the same as CVS and pleases things
1843
* ``bzr upgrade`` no longer fails when trying to fix trees that
1844
mention revisions that are not present.
1846
* Fixed bugs in listing plugins from ``bzr plugins``.
1848
* Fix case of $EDITOR containing options for the editor.
1850
* Fix log -r refusing to show the last revision.
1851
(Patch from Goffredo Baroncelli.)
1856
* ``bzr log --show-ids`` shows the revision ids of all parents.
1858
* Externally provided commands on your $BZRPATH no longer need
1859
to recognize --bzr-usage to work properly, and can just handle
1865
* Changed trace messages to go through the standard logging
1866
framework, so that they can more easily be redirected by
1871
bzr-0.0.6 2005-08-18
1875
* Python plugins, automatically loaded from the directories on
1876
BZR_PLUGIN_PATH or ~/.bzr.conf/plugins by default.
1878
* New 'bzr mkdir' command.
1880
* Commit mesage is fetched from an editor if not given on the
1881
command line; patch from Torsten Marek.
1883
* ``bzr log -m FOO`` displays commits whose message matches regexp
1886
* ``bzr add`` with no arguments adds everything under the current directory.
1888
* ``bzr mv`` does move or rename depending on its arguments, like
1891
* ``bzr missing`` command shows a summary of the differences
1892
between two trees. (Merged from John Arbash-Meinel.)
1894
* An email address for commits to a particular tree can be
1895
specified by putting it into .bzr/email within a branch. (Based
1896
on a patch from Heikki Paajanen.)
1901
* Faster working tree operations.
1906
* 3rd-party modules shipped with bzr are copied within the bzrlib
1907
python package, so that they can be installed by the setup
1908
script without clashing with anything already existing on the
1909
system. (Contributed by Gustavo Niemeyer.)
1911
* Moved plugins directory to bzrlib/, so that there's a standard
1912
plugin directory which is not only installed with bzr itself but
1913
is also available when using bzr from the development tree.
1914
BZR_PLUGIN_PATH and DEFAULT_PLUGIN_PATH are then added to the
1915
standard plugins directory.
1917
* When exporting to a tarball with ``bzr export --format tgz``, put
1918
everything under a top directory rather than dumping it into the
1919
current directory. This can be overridden with the ``--root``
1920
option. Patch from William Dodé and John Meinel.
1922
* New ``bzr upgrade`` command to upgrade the format of a branch,
1923
replacing ``bzr check --update``.
1925
* Files within store directories are no longer marked readonly on
1928
* Changed ``bzr log`` output to a more compact form suggested by
1929
John A Meinel. Old format is available with the ``--long`` or
1930
``-l`` option, patched by William Dodé.
1932
* By default the commit command refuses to record a revision with
1933
no changes unless the ``--unchanged`` option is given.
1935
* The ``--no-plugins``, ``--profile`` and ``--builtin`` command
1936
line options must come before the command name because they
1937
affect what commands are available; all other options must come
1938
after the command name because their interpretation depends on
1941
* ``branch`` and ``clone`` added as aliases for ``branch``.
1943
* Default log format is back to the long format; the compact one
1944
is available with ``--short``.
1949
* Fix bugs in committing only selected files or within a subdirectory.
1952
bzr-0.0.5 2005-06-15
1956
* ``bzr`` with no command now shows help rather than giving an
1957
error. Suggested by Michael Ellerman.
1959
* ``bzr status`` output format changed, because svn-style output
1960
doesn't really match the model of bzr. Now files are grouped by
1961
status and can be shown with their IDs. ``bzr status --all``
1962
shows all versioned files and unknown files but not ignored files.
1964
* ``bzr log`` runs from most-recent to least-recent, the reverse
1965
of the previous order. The previous behaviour can be obtained
1966
with the ``--forward`` option.
1968
* ``bzr inventory`` by default shows only filenames, and also ids
1969
if ``--show-ids`` is given, in which case the id is the second
1975
* New 'bzr whoami --email' option shows only the email component
1976
of the user identification, from Jo Vermeulen.
1978
* New ``bzr ignore PATTERN`` command.
1980
* Nicer error message for broken pipe, interrupt and similar
1981
conditions that don't indicate an internal error.
1983
* Add ``.*.sw[nop] .git .*.tmp *,v`` to default ignore patterns.
1985
* Per-branch locks keyed on ``.bzr/branch-lock``, available in
1986
either read or write mode.
1988
* New option ``bzr log --show-ids`` shows revision and file ids.
1990
* New usage ``bzr log FILENAME`` shows only revisions that
1993
* Changed format for describing changes in ``bzr log -v``.
1995
* New option ``bzr commit --file`` to take a message from a file,
1996
suggested by LarstiQ.
1998
* New syntax ``bzr status [FILE...]`` contributed by Bartosz
1999
Oler. File may be in a branch other than the working directory.
2001
* ``bzr log`` and ``bzr root`` can be given an http URL instead of
2004
* Commands can now be defined by external programs or scripts
2005
in a directory on $BZRPATH.
2007
* New "stat cache" avoids reading the contents of files if they
2008
haven't changed since the previous time.
2010
* If the Python interpreter is too old, try to find a better one
2011
or give an error. Based on a patch from Fredrik Lundh.
2013
* New optional parameter ``bzr info [BRANCH]``.
2015
* New form ``bzr commit SELECTED`` to commit only selected files.
2017
* New form ``bzr log -r FROM:TO`` shows changes in selected
2018
range; contributed by John A Meinel.
2020
* New option ``bzr diff --diff-options 'OPTS'`` allows passing
2021
options through to an external GNU diff.
2023
* New option ``bzr add --no-recurse`` to add a directory but not
2026
* ``bzr --version`` now shows more information if bzr is being run
2032
* Fixed diff format so that added and removed files will be
2033
handled properly by patch. Fix from Lalo Martins.
2035
* Various fixes for files whose names contain spaces or other
2041
* Converted black-box test suites from Bourne shell into Python;
2042
now run using ``./testbzr``. Various structural improvements to
2045
* testbzr by default runs the version of bzr found in the same
2046
directory as the tests, or the one given as the first parameter.
2048
* testbzr also runs the internal tests, so the only command
2049
required to check is just ``./testbzr``.
2051
* testbzr requires python2.4, but can be used to test bzr running
2052
under a different version.
2054
* Tests added for many other changes in this release.
2059
* Included ElementTree library upgraded to 1.2.6 by Fredrik Lundh.
2061
* Refactor command functions into Command objects based on HCT by
2062
Scott James Remnant.
2064
* Better help messages for many commands.
2066
* Expose bzrlib.open_tracefile() to start the tracefile; until
2067
this is called trace messages are just discarded.
2069
* New internal function find_touching_revisions() and hidden
2070
command touching-revisions trace the changes to a given file.
2072
* Simpler and faster compare_inventories() function.
2074
* bzrlib.open_tracefile() takes a tracefilename parameter.
2076
* New AtomicFile class.
2078
* New developer commands ``added``, ``modified``.
2083
* Cope on Windows on python2.3 by using the weaker random seed.
2084
2.4 is now only recommended.
2087
bzr-0.0.4 2005-04-22
2091
* 'bzr diff' optionally takes a list of files to diff. Still a bit
2092
basic. Patch from QuantumG.
2094
* More default ignore patterns.
2096
* New 'bzr log --verbose' shows a list of files changed in the
2097
changeset. Patch from Sebastian Cote.
2099
* Roll over ~/.bzr.log if it gets too large.
2101
* Command abbreviations 'ci', 'st', 'stat', '?' based on a patch
2104
* New 'bzr help commands' based on a patch from Denys Duchier.
2109
* User email is determined by looking at $BZREMAIL or ~/.bzr.email
2110
or $EMAIL. All are decoded by the locale preferred encoding.
2111
If none of these are present user@hostname is used. The host's
2112
fully-qualified name is not used because that tends to fail when
2113
there are DNS problems.
2115
* New 'bzr whoami' command instead of username user-email.
2120
* Make commit safe for hardlinked bzr trees.
2122
* Some Unicode/locale fixes.
2124
* Partial workaround for difflib.unified_diff not handling
2125
trailing newlines properly.
2130
* Allow docstrings for help to be in PEP0257 format. Patch from
2133
* More tests in test.sh.
2135
* Write profile data to a temporary file not into working
2136
directory and delete it when done.
2138
* Smaller .bzr.log with process ids.
2143
* Fix opening of ~/.bzr.log on Windows. Patch from Andrew
2146
* Some improvements in handling paths on Windows, based on a patch
2150
bzr-0.0.3 2005-04-06
2154
* New "directories" internal command lists versioned directories
2157
* Can now say "bzr commit --help".
2159
* New "rename" command to rename one file to a different name
2162
* New "move" command to move one or more files into a different
2165
* New "renames" command lists files renamed since base revision.
2167
* New cat command contributed by janmar.
2171
* .bzr.log is placed in $HOME (not pwd) and is always written in
2172
UTF-8. (Probably not a completely good long-term solution, but
2177
* Workaround for difflib bug in Python 2.3 that causes an
2178
exception when comparing empty files. Reported by Erik Toubro
2183
* Refactored inventory storage to insert a root entry at the top.
2187
* Start of shell-based black-box testing in test.sh.
2194
* Win32 fixes from Steve Brown.
2197
bzr-0.0.2 "black cube" 2005-03-31
2201
* Default ignore list extended (see bzrlib/__init__.py).
2203
* Patterns in .bzrignore are now added to the default ignore list,
2204
rather than replacing it.
2206
* Ignore list isn't reread for every file.
2210
* Reinstate the 'bzr check' command to check invariants of the
2213
* New 'ignored' command lists which files are ignored and why;
2214
'deleted' lists files deleted in the current working tree.
2216
* Performance improvements.
2218
* New global --profile option.
2220
* Ignore patterns like './config.h' now correctly match files in
2221
the root directory only.
2224
bzr-0.0.1 2005-03-26
2228
* More information from info command.
2230
* Can now say "bzr help COMMAND" for more detailed help.
2232
* Less file flushing and faster performance when writing logs and
2233
committing to stores.
2235
* More useful verbose output from some commands.
2239
* Fix inverted display of 'R' and 'M' during 'commit -v'.
2243
* Include a subset of ElementTree-1.2.20040618 to make
2244
installation easier.
2246
* Fix time.localtime call to work with Python 2.3 (the minimum
2250
bzr-0.0.0.69 2005-03-22
2254
* First public release.
2256
* Storage of local versions: init, add, remove, rm, info, log,
added
removed
NEWS
