5
* Support for OS Windows 98. Also .bzr.log on any windows system
6
saved in My Documents folder. (Alexander Belchenko)
8
* ``bzr mv`` enhanced to support already moved files.
9
In the past the mv command would have failed if the source file doesn't
10
exist. In this situation ``bzr mv`` would now detect that the file has
11
already moved and update the repository accordingly, if the target file
13
A new option ``--after`` has been added so that if two files already
14
exist, you could notify Bazaar that you have moved a (versioned) file
15
and replaced it with another. Thus in this case ``bzr move --after``
16
will only update the Bazaar identifier.
17
(Steffen Eichenberg, Marius Kruger)
19
* ``ls`` now works on treeless branches and remote branches.
22
* ``bzr help global-options`` describes the global options.
25
* ``bzr pull --overwrite`` will now correctly overwrite checkouts.
28
* Files are now allowed to change kind (e.g. from file to symlink).
29
Supported by ``commit``, ``revert`` and ``status``
32
* ``inventory`` and ``unknowns`` hidden in favour of ``ls``
35
* ``bzr help checkouts`` descibes what checkouts are and some possible
36
uses of them. (James Westby, Aaron Bentley)
38
* A new ``-d`` option to push, pull and merge overrides the default
39
directory. (Martin Pool)
41
* Branch format 6: smaller, and potentially faster than format 5. Supports
42
"append_history_only" mode, where the log view and revnos do not change,
43
except by being added to. Stores policy settings in
44
".bzr/branch/branch.conf".
46
* append_only branches: Format 6 branches may be configured so that log
47
view and revnos are always consistent. Either create the branch using
48
"bzr init --append-revisions-only" or edit the config file as descriped
49
in docs/configuration.txt.
51
* rebind: Format 6 branches retain the last-used bind location, so if you
52
"bzr unbind", you can "bzr bind" to bind to the previously-selected
57
* Internally revision ids are now passed around as utf-8 bytestrings,
58
rather than treating them as Unicode strings. This has performance
59
benefits for Knits, since we no longer need to decode the revision
60
id for each line of content, nor for each entry in the index. This
61
will also help with the future dirstate format. File-ids should
62
receive the same treatment in the future. (John Arbash Meinel)
64
* Reserved ids (any revision-id ending in a colon) are rejected by
65
versionedfiles, repositories, branches, and working trees
68
* Minor performance improvement by not creating a ProgressBar for
69
every KnitIndex we create. (about 90ms for a bzr.dev tree)
72
* New easier to use Branch hooks facility. There are five initial hooks,
73
all documented in bzrlib.branch.BranchHooks.__init__ - 'set_rh',
74
'post_push', 'post_pull', 'post_commit', 'post_uncommit'. These hooks
75
fire after the matching operation on a branch has taken place, and were
76
originally added for the branchrss plugin. (Robert Collins)
78
* New method ``Branch.push()`` which should be used when pushing from a
79
branch as it makes performance and policy decisions to match the UI
80
level command ``push``. (Robert Collins).
82
* New Branch.last_revision_info method, this is being done to allow
83
optimization of requests for both the number of revisions and the last
84
revision of a branch with smartservers and potentially future branch
85
formats. (Wouter van Heyst, Robert Collins)
87
* Allow 'import bzrlib.plugins.NAME' to work when the plugin NAME has not
88
yet been loaded by load_plugins(). This allows plugins to depend on each
89
other for code reuse without requiring users to perform file-renaming
90
gymnastics. (Robert Collins)
92
* New Repository method 'gather_stats' for statistic data collection.
93
This is expected to grow to cover a number of related uses mainly
94
related to bzr info. (Robert Collins)
96
* Log formatters are now managed with a registry. log.register_formatter
97
continues to work, but callers accessed the FORMATTERS dictionary
100
* ``GPGStrategy.sign()`` will now raise ``BzrBadParameterUnicode`` if
101
you pass a Unicode string rather than an 8-bit string. Callers need
102
to be updated to encode first. (John Arbash Meinel)
104
* Branch.push, pull, merge now return Result objects with information
105
about what happened, rather than a scattering of various methods. These
106
are also passed to the post hooks. (Martin Pool)
110
* ``bzr annotate`` now uses dotted revnos from the viewpoint of the
111
branch, rather than the last changed revision of the file.
112
(John Arbash Meinel, #82158)
114
* Lock operations no longer hang if they encounter a permission problem.
117
* ``bzr push`` can resume a push that was canceled before it finished.
118
Also, it can push even if the target directory exists if you supply
119
the ``--use-existing-dir`` flag.
120
(John Arbash Meinel, #30576, #45504)
122
* Fix http proxy authentication when user and an optional
123
password appears in the *_proxy vars. (Vincent Ladeuil,
126
* ``bzr log branch/file`` works for local treeless branches
127
(Aaron Bentley, #84247)
129
* Fix problem with UNC paths on Windows 98. (Alexander Belchenko, #84728)
133
* New ``--first`` option to ``bzr selftest`` to run specified tests
134
before the rest of the suite. (Martin Pool)
141
* ``bzr help global-options`` describes the global options. (Aaron Bentley)
145
* Skip documentation generation tests if the tools to do so are not
146
available. Fixes running selftest for installled copies of bzr.
147
(John Arbash Meinel, #80330)
149
* Fix the code that discovers whether bzr is being run from it's
150
working tree to handle the case when it isn't but the directory
151
it is in is below a repository. (James Westby, #77306)
154
bzr 0.14rc1 2007-01-16
158
* New connection: ``bzr+http://`` which supports tunnelling the smart
159
protocol over an HTTP connection. If writing is enabled on the bzr
160
server, then you can write over the http connection.
161
(Andrew Bennetts, John Arbash Meinel)
163
* Aliases now support quotation marks, so they can contain whitespace
166
* PyCurlTransport now use a single curl object. By specifying explicitly
167
the 'Range' header, we avoid the need to use two different curl objects
168
(and two connections to the same server). (Vincent Ladeuil)
170
* ``bzr commit`` does not prompt for a message until it is very likely to
171
succeed. (Aaron Bentley)
173
* ``bzr conflicts`` now takes --text to list pathnames of text conflicts
176
* Fix ``iter_lines_added_or_present_in_versions`` to use a set instead
177
of a list while checking if a revision id was requested. Takes 10s
178
off of the ``fileids_affected_by_revision_ids`` time, which is 10s
179
of the ``bzr branch`` time. Also improve ``fileids_...`` time by
180
filtering lines with a regex rather than multiple ``str.find()``
181
calls. (saves another 300ms) (John Arbash Meinel)
183
* Policy can be set for each configuration key. This allows keys to be
184
inherited properly across configuration entries. For example, this
185
should enable you to do::
188
push_location = sftp://host/srv/project/
189
push_location:policy = appendpath
191
And then a branch like ``/home/user/project/mybranch`` should get an
192
automatic push location of ``sftp://host/srv/project/mybranch``.
195
* Added ``bzr status --short`` to make status report svn style flags
196
for each file. For example::
204
* 'bzr selftest --clean-output' allows easily clean temporary tests
205
directories without running tests. (Alexander Belchenko)
207
* ``bzr help hidden-commands`` lists all hidden commands. (Aaron Bentley)
209
* ``bzr merge`` now has an option ``--pull`` to fall back to pull if
210
local is fully merged into remote. (Jan Hudec)
212
* ``bzr help formats`` describes available directory formats. (Aaron Bentley)
216
* A few tweaks directly to ``fileids_affected_by_revision_ids`` to
217
help speed up processing, as well allowing to extract unannotated
218
lines. Between the two ``fileids_affected_by_revision_ids`` is
219
improved by approx 10%. (John Arbash Meinel)
221
* Change Revision serialization to only write out millisecond
222
resolution. Rather than expecting floating point serialization to
223
preserve more resolution than we need. (Henri Weichers, Martin Pool)
225
* Test suite ends cleanly on Windows. (Vincent Ladeuil)
227
* When 'encoding_type' attribute of class Command is equal to 'exact',
228
force sys.stdout to be a binary stream on Windows, and therefore
229
keep exact line-endings (without LF -> CRLF conversion).
230
(Alexander Belchenko)
232
* Single-letter short options are no longer globally declared. (Martin
235
* Before using detected user/terminal encoding bzr should check
236
that Python has corresponding codec. (Alexander Belchenko)
238
* Formats for end-user selection are provided via a FormatRegistry (Aaron Bentley)
242
* ``bzr missing --verbose`` was showing adds/removals in the wrong
243
direction. (John Arbash Meinel)
245
* ``bzr annotate`` now defaults to showing dotted revnos for merged
246
revisions. It cuts them off at a depth of 12 characters, but you can
247
supply ``--long`` to see the full number. You can also use
248
``--show-ids`` to display the original revision ids, rather than
249
revision numbers and committer names. (John Arbash Meinel, #75637)
251
* bzr now supports Win32 UNC path (e.g. \\HOST\path).
252
(Alexander Belchenko, #57869)
254
* Win32-specific: output of cat, bundle and diff commands don't mangle
255
line-endings (Alexander Belchenko, #55276)
257
* Replace broken fnmatch based ignore pattern matching with custom pattern
259
(Kent Gibson, Jan Hudec #57637)
261
* pycurl and urllib can detect short reads at different places. Update
262
the test suite to test more cases. Also detect http error code 416
263
which was raised for that specific bug. Also enhance the urllib
264
robustness by detecting invalid ranges (and pycurl's one by detecting
265
short reads during the initial GET). (Vincent Ladeuil, #73948)
267
* The urllib connection sharing interacts badly with urllib2
268
proxy setting (the connections didn't go thru the proxy
269
anymore). Defining a proper ProxyHandler solves the
270
problem. (Vincent Ladeuil, #74759)
272
* Use urlutils to generate relative URLs, not osutils
273
(Aaron Bentley, #76229)
275
* ``bzr status`` in a readonly directory should work without giving
276
lots of errors. (John Arbash Meinel, #76299)
278
* Mention the revisionspec topic for the revision option help.
279
(Wouter van Heyst, #31663)
281
* Allow plugins import from zip archives.
282
(Alexander Belchenko, #68124)
287
No changes from 0.13rc1
289
bzr 0.13rc1 2006-11-27
293
* New command ``bzr remove-tree`` allows the removal of the working
297
* urllib uses shared keep-alive connections, so http
298
operations are substantially faster.
299
(Vincent Ladeuil, #53654)
301
* ``bzr export`` allows an optional branch parameter, to export a bzr
302
tree from some other url. For example:
303
``bzr export bzr.tar.gz http://bazaar-vcs.org/bzr/bzr.dev``
306
* Added ``bzr help topics`` to the bzr help system. This gives a
307
location for general information, outside of a specific command.
308
This includes updates for ``bzr help revisionspec`` the first topic
309
included. (Goffredo Baroncelli, John Arbash Meinel, #42714)
311
* WSGI-compatible HTTP smart server. See ``doc/http_smart_server.txt``.
314
* Knit files will now cache full texts only when the size of the
315
deltas is as large as the size of the fulltext. (Or after 200
316
deltas, whichever comes first). This has the most benefit on large
317
files with small changes, such as the inventory for a large project.
318
(eg For a project with 2500 files, and 7500 revisions, it changes
319
the size of inventory.knit from 11MB to 5.4MB) (John Arbash Meinel)
323
* New -D option given before the command line turns on debugging output
324
for particular areas. -Derror shows tracebacks on all errors.
327
* Clean up ``bzr selftest --benchmark bundle`` to correct an import,
328
and remove benchmarks that take longer than 10min to run.
331
* Use ``time.time()`` instead of ``time.clock()`` to decide on
332
progress throttling. Because ``time.clock()`` is actually CPU time,
333
so over a high-latency connection, too many updates get throttled.
336
* ``MemoryTransport.list_dir()`` would strip the first character for
337
files or directories in root directory. (John Arbash Meinel)
339
* New ``ChrootTransportDecorator``, accessible via the ``chroot+`` url
340
prefix. It disallows any access to locations above a set URL. (Andrew
345
* Now _KnitIndex properly decode revision ids when loading index data.
346
And optimize the knit index parsing code. (Dmitry Vasiliev, John
349
* ``bzrlib/bzrdir.py`` was directly referencing ``bzrlib.workingtree``,
350
without importing it. This prevented ``bzr upgrade`` from working
351
unless a plugin already imported ``bzrlib.workingtree``
352
(John Arbash Meinel, #70716)
354
* Suppress the traceback on invalid URLs (Vincent Ladeuil, #70803).
356
* Give nicer error message when an http server returns a 403
357
error code. (Vincent Ladeuil, #57644).
359
* When a multi-range http GET request fails, try a single
360
range one. If it fails too, forget about ranges. Remember that until
361
the death of the transport and propagates that to the clones.
362
(Vincent Ladeuil, #62276, #62029).
364
* Handles user/passwords supplied in url from command
365
line (for the urllib implementation). Don't request already
366
known passwords (Vincent Ladeuil, #42383, #44647, #48527)
368
* _KnitIndex.add_versions() dictionary compresses revision ids as they
369
are added. This fixes bug where fetching remote revisions records
370
them as full references rather than integers. (John Arbash Meinel,
373
* ``bzr ignore`` strips trailing slashes in patterns.
374
Also ``bzr ignore`` rejects absolute paths. (Kent Gibson, #4559)
376
* ``bzr ignore`` takes multiple arguments. (Cheuksan Edward Wang, #29488)
378
* mv correctly handles paths that traverse symlinks.
379
(Aaron Bentley, #66964)
381
* Give nicer looking error messages when failing to connect over ssh.
382
(John Arbash Meinel, #49172)
384
* Pushing to a remote branch does not currently update the remote working
385
tree. After a remote push, ``bzr status`` and ``bzr diff`` on the remote
386
machine now show that the working tree is out of date.
387
(Cheuksan Edward Wang #48136)
389
* Use patiencediff instead of difflib for determining deltas to insert
390
into knits. This avoids the O(N^3) behavior of difflib. Patience
391
diff should be O(N^2). (Cheuksan Edward Wang, #65714)
393
* Running ``bzr log`` on nonexistent file gives an error instead of the
394
entire log history. (Cheuksan Edward Wang #50793)
396
* ``bzr cat`` can look up contents of removed or renamed files. If the
397
pathname is ambiguous, i.e. the files in the old and new trees have
398
different id's, the default is the file in the new tree. The user can
399
use "--name-from-revision" to select the file in the old tree.
400
(Cheuksan Edward Wang, #30190)
404
* TestingHTTPRequestHandler really handles the Range header
405
(previously it was ignoring it and returning the whole file,).
411
* Clean up ``bzr selftest --benchmark bundle`` to correct an import,
412
and remove benchmarks that take longer than 10min to run.
415
bzr 0.12rc1 2006-10-23
419
* ``bzr log`` now shows dotted-decimal revision numbers for all revisions,
420
rather than just showing a decimal revision number for revisions on the
421
mainline. These revision numbers are not yet accepted as input into bzr
422
commands such as log, diff etc. (Robert Collins)
424
* revisions can now be specified using dotted-decimal revision numbers.
425
For instance, ``bzr diff -r 1.2.1..1.2.3. (Robert Collins)
427
* ``bzr help commands`` output is now shorter (Aaron Bentley)
429
* ``bzr`` now uses lazy importing to reduce the startup time. This has
430
a moderate effect on lots of actions, especially ones that have
431
little to do. For example ``bzr rocks`` time is down to 116ms from
432
283ms. (John Arbash Meinel)
434
* New Registry class to provide name-to-object registry-like support,
435
for example for schemes where plugins can register new classes to
436
do certain tasks (e.g. log formatters). Also provides lazy registration
437
to allow modules to be loaded on request. (John Arbash Meinel, Adeodato
442
* LogFormatter subclasses show now expect the 'revno' parameter to
443
show() to be a string rather than an int. (Robert Collins)
447
* ``TestCase.run_bzr``, ``run_bzr_captured``, and ``run_bzr_subprocess``
448
can take a ``working_dir='foo'`` parameter, which will change directory
449
for the command. (John Arbash Meinel)
451
* ``bzrlib.lazy_regex.lazy_compile`` can be used to create a proxy
452
around a regex, which defers compilation until first use.
455
* ``TestCase.run_bzr_subprocess`` defaults to supplying the
456
``--no-plugins`` parameter to ensure test reproducability, and avoid
457
problems with system-wide installed plugins. (John Arbash Meinel)
459
* Unique tree root ids are now supported. Newly created trees still
460
use the common root id for compatibility with bzr versions before 0.12.
463
* ``WorkingTree.set_root_id(None)`` is now deprecated. Please
464
pass in inventory.ROOT_ID if you want the default root id value.
465
(Robert Collins, John Arbash Meinel)
467
* New method ``WorkingTree.flush()`` which will write the current memory
468
inventory out to disk. At the same time, read_working_inventory will
469
no longer trash the current tree inventory if it has been modified within
470
the current lock, and the tree will now ``flush()`` automatically on
471
``unlock()``. ``WorkingTree.set_root_id()`` has been updated to take
472
advantage of this functionality. (Robert Collins, John Arbash Meinel)
474
* ``bzrlib.tsort.merge_sorted`` now accepts ``generate_revnos``. This
475
parameter will cause it to add another column to its output, which
476
contains the dotted-decimal revno for each revision, as a tuple.
479
* ``LogFormatter.show_merge`` is deprecated in favour of
480
``LogFormatter.show_merge_revno``. (Robert Collins)
484
* Avoid circular imports by creating a deprecated function for
485
``bzrlib.tree.RevisionTree``. Callers should have been using
486
``bzrlib.revisontree.RevisionTree`` anyway. (John Arbash Meinel,
489
* Don't use ``socket.MSG_WAITALL`` as it doesn't exist on all
490
platforms. (Martin Pool, #66356)
492
* Don't require ``Content-Type`` in range responses. Assume they are a
493
single range if ``Content-Type`` does not exist.
494
(John Arbash Meinel, #62473)
496
* bzr branch/pull no longer complain about progress bar cleanup when
497
interrupted during fetch. (Aaron Bentley, #54000)
499
* ``WorkingTree.set_parent_trees()`` uses the trees to directly write
500
the basis inventory, rather than going through the repository. This
501
allows us to have 1 inventory read, and 2 inventory writes when
502
committing a new tree. (John Arbash Meinel)
504
* When reverting, files that are not locally modified that do not exist
505
in the target are deleted, not just unversioned (Aaron Bentley)
507
* When trying to acquire a lock, don't fail immediately. Instead, try
508
a few times (up to 1 hour) before timing out. Also, report why the
509
lock is unavailable (John Arbash Meinel, #43521, #49556)
511
* Leave HttpTransportBase daughter classes decides how they
512
implement cloning. (Vincent Ladeuil, #61606)
514
* diff3 does not indicate conflicts on clean merge. (Aaron Bentley)
516
* If a commit fails, the commit message is stored in a file at the root of
517
the tree for later commit. (Cheuksan Edward Wang, Stefan Metzmacher,
522
* New test base class TestCaseWithMemoryTransport offers memory-only
523
testing facilities: its not suitable for tests that need to mutate disk
524
state, but most tests should not need that and should be converted to
525
TestCaseWithMemoryTransport. (Robert Collins)
527
* ``TestCase.make_branch_and_memory_tree`` now takes a format
528
option to set the BzrDir, Repository and Branch formats of the
529
created objects. (Robert Collins, John Arbash Meinel)
533
* Smart server transport test failures on windows fixed. (Lukáš Lalinský).
535
bzr 0.11rc2 2006-09-27
539
* Test suite hangs on windows fixed. (Andrew Bennets, Alexander Belchenko).
541
* Commit performance regression fixed. (Aaron Bentley, Robert Collins, John
544
bzr 0.11rc1 2006-09-25
548
* Knit files now wait to create their contents until the first data is
549
added. The old code used to create an empty .knit and a .kndx with just
550
the header. However, this caused a lot of extra round trips over sftp.
551
This can change the time for ``bzr push`` to create a new remote branch
552
from 160s down to 100s. This also affects ``bzr commit`` performance when
553
adding new files, ``bzr commit`` on a new kernel-like tree drops from 50s
554
down to 40s (John Arbash Meinel, #44692)
556
* When an entire subtree has been deleted, commit will now report that
557
just the top of the subtree has been deleted, rather than reporting
558
all the individual items. (Robert Collins)
560
* Commit performs one less XML parse. (Robert Collins)
562
* ``bzr checkout`` now operates on readonly branches as well
563
as readwrite branches. This fixes bug #39542. (Robert Collins)
565
* ``bzr bind`` no longer synchronises history with the master branch.
566
Binding should be followed by an update or push to synchronise the
567
two branches. This is closely related to the fix for bug #39542.
570
* ``bzrlib.lazy_import.lazy_import`` function to create on-demand
571
objects. This allows all imports to stay at the global scope, but
572
modules will not actually be imported if they are not used.
575
* Support bzr:// and bzr+ssh:// urls to work with the new RPC-based
576
transport which will be used with the upcoming high-performance smart
577
server. The new command ``bzr serve`` will invoke bzr in server mode,
578
which processes these requests. (Andrew Bennetts, Robert Collins, Martin
581
* New command ``bzr version-info`` which can be used to get a summary
582
of the current state of the tree. This is especially useful as part
583
of a build commands. See ``doc/version_info.txt`` for more information
588
* 'bzr inventory [FILE...]' allows restricting the file list to a
589
specific set of files. (John Arbash Meinel, #3631)
591
* Don't abort when annotating empty files (John Arbash Meinel, #56814)
593
* Add ``Stanza.to_unicode()`` which can be passed to another Stanza
594
when nesting stanzas. Also, add ``read_stanza_unicode`` to handle when
595
reading a nested Stanza. (John Arbash Meinel)
597
* Transform._set_mode() needs to stat the right file.
598
(John Arbash Meinel, #56549)
600
* Raise WeaveFormatError rather than StopIteration when trying to read
601
an empty Weave file. (John Arbash Meinel, #46871)
603
* Don't access e.code for generic URLErrors, only HTTPErrors have .code.
604
(Vincent Ladeuil, #59835)
606
* Handle boundary="" lines properly to allow access through a Squid proxy.
607
(John Arbash Meinel, #57723)
609
* revert now removes newly-added directories (Aaron Bentley, #54172)
611
* ``bzr upgrade sftp://`` shouldn't fail to upgrade v6 branches if there
612
isn't a working tree. (David Allouche, #40679)
614
* Give nicer error messages when a user supplies an invalid --revision
615
parameter. (John Arbash Meinel, #55420)
617
* Handle when LANG is not recognized by python. Emit a warning, but
618
just revert to using 'ascii'. (John Arbash Meinel, #35392)
620
* Don't use preexec_fn on win32, as it is not supported by subprocess.
623
* Skip specific tests when the dependencies aren't met. This includes
624
some ``setup.py`` tests when ``python-dev`` is not available, and
625
some tests that depend on paramiko. (John Arbash Meinel, Mattheiu Moy)
627
* Fallback to Paramiko properly, if no ``ssh`` executable exists on
628
the system. (Andrew Bennetts, John Arbash Meinel)
630
* ``Branch.bind(other_branch)`` no longer takes a write lock on the
631
other branch, and will not push or pull between the two branches.
632
API users will need to perform a push or pull or update operation if they
633
require branch synchronisation to take place. (Robert Collins, #47344)
635
* When creating a tarball or zipfile export, export unicode names as utf-8
636
paths. This may not work perfectly on all platforms, but has the best
637
chance of working in the common case. (John Arbash Meinel, #56816)
639
* When committing, only files that exist in working tree or basis tree
640
may be specified (Aaron Bentley, #50793)
644
* Fixes to run on Python 2.5 (Brian M. Carlson, Martin Pool, Marien Zwart)
648
* TestCaseInTempDir now creates a separate directory for HOME, rather
649
than having HOME set to the same location as the working directory.
652
* run_bzr_subprocess() can take an optional 'env_changes={}' parameter,
653
which will update os.environ inside the spawned child. It also can
654
take a 'universal_newlines=True', which helps when checking the output
655
of the command. (John Arbash Meinel)
657
* Refactor SFTP vendors to allow easier re-use when ssh is used.
660
* Transport.list_dir() and Transport.iter_files_recursive() should always
661
return urlescaped paths. This is now tested (there were bugs in a few
662
of the transports) (Andrew Bennetts, David Allouche, John Arbash Meinel)
664
* New utility function symbol_versioning.deprecation_string. Returns the
665
formatted string for a callable, deprecation format pair. (Robert Collins)
667
* New TestCase helper applyDeprecated. This allows you to call a callable
668
which is deprecated without it spewing to the screen, just by supplying
669
the deprecation format string issued for it. (Robert Collins)
671
* Transport.append and Transport.put have been deprecated in favor of
672
.append_bytes, .append_file, .put_bytes, and .put_file. This removes the
673
ambiguity in what type of object the functions take.
674
Transport.non_atomic_put_{bytes,file} has also been added. Which works
675
similarly to Transport.append() except for SFTP, it doesn't have a round
676
trip when opening the file. Also, it provides functionality for creating
677
a parent directory when trying to create a file, rather than raise
678
NoSuchFile and forcing the caller to repeat their request.
681
* WorkingTree has a new api ``unversion`` which allow the unversioning of
682
entries by their file id. (Robert Collins)
684
* WorkingTree.pending_merges is deprecated. Please use the get_parent_ids
685
(introduced in 0.10) method instead. (Robert Collins)
687
* WorkingTree has a new lock_tree_write method which locks the branch for
688
read rather than write. This is appropriate for actions which only need
689
the branch data for reference rather than mutation. A new decorator
690
needs_tree_write_lock is provided in the workingtree module. Like the
691
needs_read_lock and needs_write_lock decorators this allows static
692
declaration of the locking requirements of a function to ensure that
693
a lock is taken out for casual scripts. (Robert Collins, #54107)
695
* All WorkingTree methods which write to the tree, but not to the branch
696
have been converted to use ``needs_tree_write_lock`` rather than
697
``needs_write_lock``. Also converted is the revert, conflicts and tree
698
transform modules. This provides a modest performance improvement on
699
metadir style trees, due to the reduce lock-acquisition, and a more
700
significant performance improvement on lightweight checkouts from
701
remote branches, where trivial operations used to pay a significant
702
penalty. It also provides the basis for allowing readonly checkouts.
705
* Special case importing the standard library 'copy' module. This shaves
706
off 40ms of startup time, while retaining compatibility. See:
707
``bzrlib/inspect_for_copy.py`` for more details. (John Arbash Meinel)
709
* WorkingTree has a new parent class MutableTree which represents the
710
specialisations of Tree which are able to be altered. (Robert Collins)
712
* New methods mkdir and put_file_bytes_non_atomic on MutableTree that
713
mutate the tree and its contents. (Robert Collins)
715
* Transport behaviour at the root of the URL is now defined and tested.
716
(Andrew Bennetts, Robert Collins)
720
* New test helper classs MemoryTree. This is typically accessed via
721
``self.make_branch_and_memory_tree()`` in test cases. (Robert Collins)
723
* Add start_bzr_subprocess and stop_bzr_subprocess to allow test code to
724
continue running concurrently with a subprocess of bzr. (Andrew Bennetts,
727
* Add a new method ``Transport.get_smart_client()``. This is provided to
728
allow upgrades to a richer interface than the VFS one provided by
729
Transport. (Andrew Bennetts, Martin Pool)
734
* 'merge' now takes --uncommitted, to apply uncommitted changes from a
735
tree. (Aaron Bentley)
737
* 'bzr add --file-ids-from' can be used to specify another path to use
738
for creating file ids, rather than generating all new ones. Internally,
739
the 'action' passed to smart_add_tree() can return file_ids that
740
will be used, rather than having bzrlib generate new ones.
741
(John Arbash Meinel, #55781)
743
* ``bzr selftest --benchmark`` now allows a ``--cache-dir`` parameter.
744
This will cache some of the intermediate trees, and decrease the
745
setup time for benchmark tests. (John Arbash Meinel)
747
* Inverse forms are provided for all boolean options. For example,
748
--strict has --no-strict, --no-recurse has --recurse (Aaron Bentley)
750
* Serialize out Inventories directly, rather than using ElementTree.
751
Writing out a kernel sized inventory drops from 2s down to ~350ms.
752
(Robert Collins, John Arbash Meinel)
756
* Help diffutils 2.8.4 get along with binary tests (Marien Zwart: #57614)
758
* Change LockDir so that if the lock directory doesn't exist when
759
lock_write() is called, an attempt will be made to create it.
760
(John Arbash Meinel, #56974)
762
* ``bzr uncommit`` preserves pending merges. (John Arbash Meinel, #57660)
764
* Active FTP transport now works as intended. (ghozzy, #56472)
766
* Really fix mutter() so that it won't ever raise a UnicodeError.
767
It means it is possible for ~/.bzr.log to contain non UTF-8 characters.
768
But it is a debugging log, not a real user file.
769
(John Arbash Meinel, #56947, #53880)
771
* Change Command handle to allow Unicode command and options.
772
At present we cannot register Unicode command names, so we will get
773
BzrCommandError('unknown command'), or BzrCommandError('unknown option')
774
But that is better than a UnicodeError + a traceback.
775
(John Arbash Meinel, #57123)
777
* Handle TZ=UTC properly when reading/writing revisions.
778
(John Arbash Meinel, #55783, #56290)
780
* Use GPG_TTY to allow gpg --cl to work with gpg-agent in a pipeline,
781
(passing text to sign in on stdin). (John Arbash Meinel, #54468)
783
* External diff does the right thing for binaries even in foreign
784
languages. (John Arbash Meinel, #56307)
786
* Testament handles more cases when content is unicode. Specific bug was
787
in handling of revision properties. (John Arbash Meinel, Holger Krekel,
790
* The bzr selftest was failing on installed versions due to a bug in a new
791
test helper. (John Arbash Meinel, Robert Collins, #58057)
795
* ``bzrlib.cache_utf8`` contains ``encode()`` and ``decode()`` functions
796
which can be used to cache the conversion between utf8 and Unicode.
797
Especially helpful for some of the knit annotation code, which has to
798
convert revision ids to utf8 to annotate lines in storage.
801
* ``setup.py`` now searches the filesystem to find all packages which
802
need to be installed. This should help make the life of packagers
803
easier. (John Arbash Meinel)
809
* The hard-coded built-in ignore rules have been removed. There are
810
now two rulesets which are enforced. A user global one in
811
~/.bazaar/ignore which will apply to every tree, and the tree
812
specific one '.bzrignore'.
813
~/.bazaar/ignore will be created if it does not exist, but with
814
a more conservative list than the old default.
815
This fixes bugs with default rules being enforced no matter what.
816
The old list of ignore rules from bzr is available by
817
running 'bzr ignore --old-default-rules'.
818
(Robert Collins, Martin Pool, John Arbash Meinel)
820
* 'branches.conf' has been changed to 'locations.conf', since it can apply
821
to more locations than just branch locations.
826
* The revision specifier "revno:" is extended to accept the syntax
827
revno:N:branch. For example,
828
revno:42:http://bazaar-vcs.org/bzr/bzr.dev/ means revision 42 in
829
bzr.dev. (Matthieu Moy)
831
* Tests updates to ensure proper URL handling, UNICODE support, and
832
proper printing when the user's terminal encoding cannot display
833
the path of a file that has been versioned.
834
``bzr branch`` can take a target URL rather than only a local directory.
835
Branch.get_parent()/set_parent() now save a relative path if possible,
836
and normalize the parent based on root, allowing access across
837
different transports. (John Arbash Meinel, Wouter van Heyst, Martin Pool)
838
(Malone #48906, #42699, #40675, #5281, #3980, #36363, #43689,
841
* On Unix, detect terminal width using an ioctl not just $COLUMNS.
842
Use terminal width for single-line logs from ``bzr log --line`` and
843
pending-merge display. (Robert Widhopf-Fenk, Gustavo Niemeyer)
846
* On Windows, detect terminal width using GetConsoleScreenBufferInfo.
847
(Alexander Belchenko)
849
* Speedup improvement for 'date:'-revision search. (Guillaume Pinot).
851
* Show the correct number of revisions pushed when pushing a new branch.
854
* 'bzr selftest' now shows a progress bar with the number of tests, and
855
progress made. 'make check' shows tests in -v mode, to be more useful
856
for the PQM status window. (Robert Collins).
857
When using a progress bar, failed tests are printed out, rather than
858
being overwritten by the progress bar until the suite finishes.
861
* 'bzr selftest --benchmark' will run a new benchmarking selftest.
862
'bzr selftest --benchmark --lsprof-timed' will use lsprofile to generate
863
profile data for the individual profiled calls, allowing for fine
864
grained analysis of performance.
865
(Robert Collins, Martin Pool).
867
* 'bzr commit' shows a progress bar. This is useful for commits over sftp
868
where commit can take an appreciable time. (Robert Collins)
870
* 'bzr add' is now less verbose in telling you what ignore globs were
871
matched by files being ignored. Instead it just tells you how many
872
were ignored (because you might reasonably be expecting none to be
873
ignored). 'bzr add -v' is unchanged and will report every ignored
874
file. (Robert Collins).
876
* ftp now has a test server if medusa is installed. As part of testing,
877
ftp support has been improved, including support for supplying a
878
non-standard port. (John Arbash Meinel).
880
* 'bzr log --line' shows the revision number, and uses only the
881
first line of the log message (#5162, Alexander Belchenko;
884
* 'bzr status' has had the --all option removed. The 'bzr ls' command
885
should be used to retrieve all versioned files. (Robert Collins)
887
* 'bzr bundle OTHER/BRANCH' will create a bundle which can be sent
888
over email, and applied on the other end, while maintaining ancestry.
889
This bundle can be applied with either 'bzr merge' or 'bzr pull',
890
the same way you would apply another branch.
891
(John Arbash Meinel, Aaron Bentley)
893
* 'bzr whoami' can now be used to set your identity from the command line,
894
for a branch or globally. (Robey Pointer)
896
* 'bzr checkout' now aliased to 'bzr co', and 'bzr annotate' to 'bzr ann'.
899
* 'bzr revert DIRECTORY' now reverts the contents of the directory as well.
902
* 'bzr get sftp://foo' gives a better error when paramiko is not present.
903
Also updates things like 'http+pycurl://' if pycurl is not present.
904
(John Arbash Meinel) (Malone #47821, #52204)
906
* New env variable BZR_PROGRESS_BAR, sets the default progress bar type.
907
Can be set to 'none' or 'dummy' to disable the progress bar, 'dots' or
908
'tty' to create the respective type. (John Arbash Meinel, #42197, #51107)
910
* Improve the help text for 'bzr diff' to explain what various options do.
911
(John Arbash Meinel, #6391)
913
* 'bzr uncommit -r 10' now uncommits revisions 11.. rather than uncommitting
914
revision 10. This makes -r10 more in line with what other commands do.
915
'bzr uncommit' also now saves the pending merges of the revisions that
916
were removed. So it is safe to uncommit after a merge, fix something,
917
and commit again. (John Arbash Meinel, #32526, #31426)
919
* 'bzr init' now also works on remote locations.
920
(Wouter van Heyst, #48904)
922
* HTTP support has been updated. When using pycurl we now support
923
connection keep-alive, which reduces dns requests and round trips.
924
And for both urllib and pycurl we support multi-range requests,
925
which decreases the number of round-trips. Performance results for
926
``bzr branch http://bazaar-vcs.org/bzr/bzr.dev/`` indicate
927
http branching is now 2-3x faster, and ``bzr pull`` in an existing
928
branch is as much as 4x faster.
929
(Michael Ellerman, Johan Rydberg, John Arbash Meinel, #46768)
931
* Performance improvements for sftp. Branching and pulling are now up to
932
2x faster. Utilize paramiko.readv() support for async requests if it
933
is available (paramiko > 1.6) (John Arbash Meinel)
937
* Fix shadowed definition of TestLocationConfig that caused some
938
tests not to run. (#32587, Erik Bågfors, Michael Ellerman,
941
* Fix unnecessary requirement of sign-my-commits that it be run from
942
a working directory. (Martin Pool, Robert Collins)
944
* 'bzr push location' will only remember the push location if it succeeds
945
in connecting to the remote location. (#49742, John Arbash Meinel)
947
* 'bzr revert' no longer toggles the executable bit on win32
948
(#45010, John Arbash Meinel)
950
* Handle broken pipe under win32 correctly. (John Arbash Meinel)
952
* sftp tests now work correctly on win32 if you have a newer paramiko
955
* Cleanup win32 test suite, and general cleanup of places where
956
file handles were being held open. (John Arbash Meinel)
958
* When specifying filenames for 'diff -r x..y', the name of the file in the
959
working directory can be used, even if its name is different in both x
962
* File-ids containing single- or double-quotes are handled correctly by
963
push. (#52227, Aaron Bentley)
965
* Normalize unicode filenames to ensure cross-platform consistency.
966
(John Arbash Meinel, #43689)
968
* The argument parser can now handle '-' as an argument. Currently
969
no code interprets it specially (it is mostly handled as a file named
970
'-'). But plugins, and future operations can use it.
971
(John Arbash meinel, #50984)
973
* Bundles can properly read binary files with a plain '\r' in them.
974
(John Arbash Meinel, #51927)
976
* Tuning iter_entries() to be more efficient (John Arbash Meinel, #5444)
978
* Lots of win32 fixes (the test suite passes again).
979
(John Arbash Meinel, #50155)
981
* Handle openbsd returning None for sys.getfilesystemencoding() (#41183)
983
* Support ftp APPE (append) to allow Knits to be used over ftp (#42592)
985
* Removals are only committed if they match the filespec (or if there is
986
no filespec). (#46635, Aaron Bentley)
988
* smart-add recurses through all supplied directories
989
(John Arbash Meinel, #52578)
991
* Make the bundle reader extra lines before and after the bundle text.
992
This allows you to parse an email with the bundle inline.
993
(John Arbash Meinel, #49182)
995
* Change the file id generator to squash a little bit more. Helps when
996
working with long filenames on windows. (Also helps for unicode filenames
997
not generating hidden files). (John Arbash Meinel, #43801)
999
* Restore terminal mode on C-c while reading sftp password. (#48923,
1000
Nicholas Allen, Martin Pool)
1002
* Timestamps are rounded to 1ms, and revision entries can be recreated
1003
exactly. (John Arbash Meinel, Jamie Wilkinson, #40693)
1005
* Branch.base has changed to a URL, but ~/.bazaar/locations.conf should
1006
use local paths, since it is user visible (John Arbash Meinel, #53653)
1008
* ``bzr status foo`` when foo was unversioned used to cause a full delta
1009
to be generated (John Arbash Meinel, #53638)
1011
* When reading revision properties, an empty value should be considered
1012
the empty string, not None (John Arbash Meinel, #47782)
1014
* ``bzr diff --diff-options`` can now handle binary files being changed.
1015
Also, the output is consistent when --diff-options is not supplied.
1016
(John Arbash Meinel, #54651, #52930)
1018
* Use the right suffixes for loading plugins (John Arbash Meinel, #51810)
1020
* Fix Branch.get_parent() to handle the case when the parent is not
1021
accessible (John Arbash Meinel, #52976)
1025
* Combine the ignore rules into a single regex rather than looping over
1026
them to reduce the threshold where N^2 behaviour occurs in operations
1027
like status. (Jan Hudec, Robert Collins).
1029
* Appending to bzrlib.DEFAULT_IGNORE is now deprecated. Instead, use
1030
one of the add functions in bzrlib.ignores. (John Arbash Meinel)
1032
* 'bzr push' should only push the ancestry of the current revision, not
1033
all of the history in the repository. This is especially important for
1034
shared repositories. (John Arbash Meinel)
1036
* bzrlib.delta.compare_trees now iterates in alphabetically sorted order,
1037
rather than randomly walking the inventories. (John Arbash Meinel)
1039
* Doctests are now run in temporary directories which are cleaned up when
1040
they finish, rather than using special ScratchDir/ScratchBranch objects.
1043
* Split ``check`` into separate methods on the branch and on the repository,
1044
so that it can be specialized in ways that are useful or efficient for
1045
different formats. (Martin Pool, Robert Collins)
1047
* Deprecate Repository.all_revision_ids; most methods don't really need
1048
the global revision graph but only that part leading up to a particular
1049
revision. (Martin Pool, Robert Collins)
1051
* Add a BzrDirFormat control_formats list which allows for control formats
1052
that do not use '.bzr' to store their data - i.e. '.svn', '.hg' etc.
1053
(Robert Collins, Jelmer Vernooij).
1055
* bzrlib.diff.external_diff can be redirected to any file-like object.
1056
Uses subprocess instead of spawnvp.
1057
(#4047, #48914, James Henstridge, John Arbash Meinel)
1059
* New command line option '--profile-imports', which will install a custom
1060
importer to log time to import modules and regex compilation time to
1061
sys.stderr (John Arbash Meinel)
1063
* 'EmptyTree' is now deprecated, please use repository.revision_tree(None)
1064
instead. (Robert Collins)
1066
* "RevisionTree" is now in bzrlib/revisiontree.py. (Robert Collins)
1068
bzr 0.8.2 2006-05-17
1072
* setup.py failed to install launchpad plugin. (Martin Pool)
1074
bzr 0.8.1 2006-05-16
1078
* Fix failure to commit a merge in a checkout. (Martin Pool,
1079
Robert Collins, Erik Bågfors, #43959)
1081
* Nicer messages from 'commit' in the case of renames, and correct
1082
messages when a merge has occured. (Robert Collins, Martin Pool)
1084
* Separate functionality from assert statements as they are skipped in
1085
optimized mode of python. Add the same check to pending merges.
1086
(#44443, Olaf Conradi)
1090
* Do not show the None revision in output of bzr ancestry. (Olaf Conradi)
1092
* Add info on standalone branches without a working tree.
1093
(#44155, Olaf Conradi)
1095
* Fix bug in knits when raising InvalidRevisionId. (#44284, Olaf Conradi)
1099
* Make editor invocation comply with Debian Policy. First check
1100
environment variables VISUAL and EDITOR, then try editor from
1101
alternatives system. If that all fails, fall back to the pre-defined
1102
list of editors. (#42904, Olaf Conradi)
1106
* New 'register-branch' command registers a public branch into
1107
Launchpad.net, where it can be associated with bugs, etc.
1108
(Martin Pool, Bjorn Tillenius, Robert Collins)
1112
* New public api in InventoryEntry - 'describe_change(old, new)' which
1113
provides a human description of the changes between two old and
1114
new. (Robert Collins, Martin Pool)
1118
* Fix test case for bzr info in upgrading a standalone branch to metadir,
1119
uses bzrlib api now. (Olaf Conradi)
1123
NOTES WHEN UPGRADING:
1125
Release 0.8 of bzr introduces a new format for history storage, called
1126
'knit', as an evolution of to the 'weave' format used in 0.7. Local
1127
and remote operations are faster using knits than weaves. Several
1128
operations including 'init', 'init-repo', and 'upgrade' take a
1129
--format option that controls this. Branching from an existing branch
1130
will keep the same format.
1132
It is possible to merge, pull and push between branches of different
1133
formats but this is slower than moving data between homogenous
1134
branches. It is therefore recommended (but not required) that you
1135
upgrade all branches for a project at the same time. Information on
1136
formats is shown by 'bzr info'.
1138
bzr 0.8 now allows creation of 'repositories', which hold the history
1139
of files and revisions for several branches. Previously bzr kept all
1140
the history for a branch within the .bzr directory at the root of the
1141
branch, and this is still the default. To create a repository, use
1142
the new 'bzr init-repo' command. Branches exist as directories under
1143
the repository and contain just a small amount of information
1144
indicating the current revision of the branch.
1146
bzr 0.8 also supports 'checkouts', which are similar to in cvs and
1147
subversion. Checkouts are associated with a branch (optionally in a
1148
repository), which contains all the historical information. The
1149
result is that a checkout can be deleted without losing any
1150
already-committed revisions. A new 'update' command is also available.
1152
Repositories and checkouts are not supported with the 0.7 storage
1153
format. To use them you must upgrad to either knits, or to the
1154
'metaweave' format, which uses weaves but changes the .bzr directory
1160
* Sftp paths can now be relative, or local, according to the lftp
1161
convention. Paths now take the form:
1162
sftp://user:pass@host:port/~/relative/path
1164
sftp://user:pass@host:port/absolute/path
1166
* The FTP transport now tries to reconnect after a temporary
1167
failure. ftp put is made atomic. (Matthieu Moy)
1169
* The FTP transport now maintains a pool of connections, and
1170
reuses them to avoid multiple connections to the same host (like
1171
sftp did). (Daniel Silverstone)
1173
* The bzr_man.py file has been removed. To create the man page now,
1174
use ./generate_docs.py man. The new program can also create other files.
1175
Run "python generate_docs.py --help" for usage information. (Hans
1176
Ulrich Niedermann & James Blackwell).
1178
* Man Page now gives full help (James Blackwell). Help also updated to
1179
reflect user config now being stored in .bazaar (Hans Ulrich
1182
* It's now possible to set aliases in bazaar.conf (Erik Bågfors)
1184
* Pull now accepts a --revision argument (Erik Bågfors)
1186
* 'bzr re-sign' now allows multiple revisions to be supplied on the command
1187
line. You can now use the following command to sign all of your old commits.
1188
find .bzr/revision-store// -name my@email-* \
1189
| sed 's/.*\/\/..\///' \
1192
* Upgrade can now upgrade over the network. (Robert Collins)
1194
* Two new commands 'bzr checkout' and 'bzr update' allow for CVS/SVN-alike
1195
behaviour. By default they will cache history in the checkout, but
1196
with --lightweight almost all data is kept in the master branch.
1199
* 'revert' unversions newly-versioned files, instead of deleting them.
1201
* 'merge' is more robust. Conflict messages have changed.
1203
* 'merge' and 'revert' no longer clobber existing files that end in '~' or
1206
* Default log format can be set in configuration and plugins can register
1207
their own formatters. (Erik Bågfors)
1209
* New 'reconcile' command will check branch consistency and repair indexes
1210
that can become out of sync in pre 0.8 formats. (Robert Collins,
1213
* New 'bzr init --format' and 'bzr upgrade --format' option to control
1214
what storage format is created or produced. (Robert Collins,
1217
* Add parent location to 'bzr info', if there is one. (Olaf Conradi)
1219
* New developer commands 'weave-list' and 'weave-join'. (Martin Pool)
1221
* New 'init-repository' command, plus support for repositories in 'init'
1222
and 'branch' (Aaron Bentley, Erik Bågfors, Robert Collins)
1224
* Improve output of 'info' command. Show all relevant locations related to
1225
working tree, branch and repository. Use kibibytes for binary quantities.
1226
Fix off-by-one error in missing revisions of working tree. Make 'info'
1227
work on branches, repositories and remote locations. Show locations
1228
relative to the shared repository, if applicable. Show locking status
1229
of locations. (Olaf Conradi)
1231
* Diff and merge now safely handle binary files. (Aaron Bentley)
1233
* 'pull' and 'push' now normalise the revision history, so that any two
1234
branches with the same tip revision will have the same output from 'log'.
1237
* 'merge' accepts --remember option to store parent location, like 'push'
1238
and 'pull'. (Olaf Conradi)
1240
* bzr status and diff when files given as arguments do not exist
1241
in the relevant trees. (Martin Pool, #3619)
1243
* Add '.hg' to the default ignore list. (Martin Pool)
1245
* 'knit' is now the default disk format. This improves disk performance and
1246
utilization, increases incremental pull performance, robustness with SFTP
1247
and allows checkouts over SFTP to perform acceptably.
1248
The initial Knit code was contributed by Johan Rydberg based on a
1249
specification by Martin Pool.
1250
(Robert Collins, Aaron Bentley, Johan Rydberg, Martin Pool).
1252
* New tool to generate all-in-one html version of the manual. (Alexander
1255
* Hitting CTRL-C while doing an SFTP push will no longer cause stale locks
1256
to be left in the SFTP repository. (Robert Collins, Martin Pool).
1258
* New option 'diff --prefix' to control how files are named in diff
1259
output, with shortcuts '-p0' and '-p1' corresponding to the options for
1260
GNU patch. (Alexander Belchenko, Goffredo Baroncelli, Martin Pool)
1262
* Add --revision option to 'annotate' command. (Olaf Conradi)
1264
* If bzr shows an unexpected revision-history after pulling (perhaps due
1265
to a reweave) it can now be corrected by 'bzr reconcile'.
1270
* Commit is now verbose by default, and shows changed filenames and the
1271
new revision number. (Robert Collins, Martin Pool)
1273
* Unify 'mv', 'move', 'rename'. (#5379, Matthew Fuller)
1275
* 'bzr -h' shows help. (#35940, Martin Pool, Ian Bicking)
1277
* Make 'pull' and 'push' remember location on failure using --remember.
1280
* For compatibility, make old format for using weaves inside metadir
1281
available as 'metaweave' format. Rename format 'metadir' to 'default'.
1282
Clean up help for option --format in commands 'init', 'init-repo' and
1283
'upgrade'. (Olaf Conradi)
1287
* The internal storage of history, and logical branch identity have now
1288
been split into Branch, and Repository. The common locking and file
1289
management routines are now in bzrlib.lockablefiles.
1290
(Aaron Bentley, Robert Collins, Martin Pool)
1292
* Transports can now raise DependencyNotPresent if they need a library
1293
which is not installed, and then another implementation will be
1294
tried. (Martin Pool)
1296
* Remove obsolete (and no-op) `decode` parameter to `Transport.get`.
1299
* Using Tree Transform for merge, revert, tree-building
1301
* WorkingTree.create, Branch.create, WorkingTree.create_standalone,
1302
Branch.initialize are now deprecated. Please see BzrDir.create_* for
1303
replacement API's. (Robert Collins)
1305
* New BzrDir class represents the .bzr control directory and manages
1306
formatting issues. (Robert Collins)
1308
* New repository.InterRepository class encapsulates Repository to
1309
Repository actions and allows for clean selection of optimised code
1310
paths. (Robert Collins)
1312
* bzrlib.fetch.fetch and bzrlib.fetch.greedy_fetch are now deprecated,
1313
please use 'branch.fetch' or 'repository.fetch' depending on your
1314
needs. (Robert Collins)
1316
* deprecated methods now have a 'is_deprecated' flag on them that can
1317
be checked, if you need to determine whether a given callable is
1318
deprecated at runtime. (Robert Collins)
1320
* Progress bars are now nested - see
1321
bzrlib.ui.ui_factory.nested_progress_bar. (Robert Collins, Robey Pointer)
1323
* New API call get_format_description() for each type of format.
1326
* Changed branch.set_parent() to accept None to remove parent.
1329
* Deprecated BzrError AmbiguousBase. (Olaf Conradi)
1331
* WorkingTree.branch is now a read only property. (Robert Collins)
1333
* bzrlib.ui.text.TextUIFactory now accepts a bar_type parameter which
1334
can be None or a factory that will create a progress bar. This is
1335
useful for testing or for overriding the bzrlib.progress heuristic.
1338
* New API method get_physical_lock_status() to query locks present on a
1339
transport. (Olaf Conradi)
1341
* Repository.reconcile now takes a thorough keyword parameter to allow
1342
requesting an indepth reconciliation, rather than just a data-loss
1343
check. (Robert Collins)
1345
* bzrlib.ui.ui_factory protocol now supports 'get_boolean' to prompt
1346
the user for yes/no style input. (Robert Collins)
1350
* SFTP tests now shortcut the SSH negotiation, reducing test overhead
1351
for testing SFTP protocol support. (Robey Pointer)
1353
* Branch formats are now tested once per implementation (see bzrlib.
1354
tests.branch_implementations. This is analagous to the transport
1355
interface tests, and has been followed up with working tree,
1356
repository and BzrDir tests. (Robert Collins)
1358
* New test base class TestCaseWithTransport provides a transport aware
1359
test environment, useful for testing any transport-interface using
1360
code. The test suite option --transport controls the transport used
1361
by this class (when its not being used as part of implementation
1362
contract testing). (Robert Collins)
1364
* Close logging handler on disabling the test log. This will remove the
1365
handler from the internal list inside python's logging module,
1366
preventing shutdown from closing it twice. (Olaf Conradi)
1368
* Move test case for uncommit to blackbox tests. (Olaf Conradi)
1370
* run_bzr and run_bzr_captured now accept a 'stdin="foo"' parameter which
1371
will provide String("foo") to the command as its stdin.
1377
* .bzrignore is excluded from exports, on the grounds that it's a bzr
1378
internal-use file and may not be wanted. (Jamie Wilkinson)
1380
* The "bzr directories" command were removed in favor of the new
1381
--kind option to the "bzr inventory" command. To list all
1382
versioned directories, now use "bzr inventory --kind directory".
1385
* Under Windows configuration directory is now %APPDATA%\bazaar\2.0
1386
by default. (John Arbash Meinel)
1388
* The parent of Bzr configuration directory can be set by BZR_HOME
1389
environment variable. Now the path for it is searched in BZR_HOME, then
1390
in HOME. Under Windows the order is: BZR_HOME, APPDATA (usually
1391
points to C:\Documents and Settings\User Name\Application Data), HOME.
1392
(John Arbash Meinel)
1394
* Plugins with the same name in different directories in the bzr plugin
1395
path are no longer loaded: only the first successfully loaded one is
1396
used. (Robert Collins)
1398
* Use systems' external ssh command to open connections if possible.
1399
This gives better integration with user settings such as ProxyCommand.
1402
* Permissions on files underneath .bzr/ are inherited from the .bzr
1403
directory. So for a shared repository, simply doing 'chmod -R g+w .bzr/'
1404
will mean that future file will be created with group write permissions.
1406
* configure.in and config.guess are no longer in the builtin default
1409
* '.sw[nop]' pattern ignored, to ignore vim swap files for nameless
1410
files. (John Arbash Meinel, Martin Pool)
1414
* "bzr INIT dir" now initializes the specified directory, and creates
1415
it if it does not exist. (John Arbash Meinel)
1417
* New remerge command (Aaron Bentley)
1419
* Better zsh completion script. (Steve Borho)
1421
* 'bzr diff' now returns 1 when there are changes in the working
1422
tree. (Robert Collins)
1424
* 'bzr push' now exists and can push changes to a remote location.
1425
This uses the transport infrastructure, and can store the remote
1426
location in the ~/.bazaar/branches.conf configuration file.
1429
* Test directories are only kept if the test fails and the user requests
1432
* Tweaks to short log printing
1434
* Added branch nicks, new nick command, printing them in log output.
1437
* If $BZR_PDB is set, pop into the debugger when an uncaught exception
1438
occurs. (Martin Pool)
1440
* Accept 'bzr resolved' (an alias for 'bzr resolve'), as this is
1441
the same as Subversion. (Martin Pool)
1443
* New ftp transport support (on ftplib), for ftp:// and aftp://
1444
URLs. (Daniel Silverstone)
1446
* Commit editor temporary files now start with 'bzr_log.', to allow
1447
text editors to match the file name and set up appropriate modes or
1448
settings. (Magnus Therning)
1450
* Improved performance when integrating changes from a remote weave.
1451
(Goffredo Baroncelli)
1453
* Sftp will attempt to cache the connection, so it is more likely that
1454
a connection will be reused, rather than requiring multiple password
1457
* bzr revno now takes an optional argument indicating the branch whose
1458
revno should be printed. (Michael Ellerman)
1460
* bzr cat defaults to printing the last version of the file.
1461
(#3632, Matthieu Moy)
1463
* New global option 'bzr --lsprof COMMAND' runs bzr under the lsprof
1464
profiler. (Denys Duchier)
1466
* Faster commits by reading only the headers of affected weave files.
1469
* 'bzr add' now takes a --dry-run parameter which shows you what would be
1470
added, but doesn't actually add anything. (Michael Ellerman)
1472
* 'bzr add' now lists how many files were ignored per glob. add --verbose
1473
lists the specific files. (Aaron Bentley)
1475
* 'bzr missing' now supports displaying changes in diverged trees and can
1476
be limited to show what either end of the comparison is missing.
1477
(Aaron Bently, with a little prompting from Daniel Silverstone)
1481
* SFTP can walk up to the root path without index errors. (Robert Collins)
1483
* Fix bugs in running bzr with 'python -O'. (Martin Pool)
1485
* Error when run with -OO
1487
* Fix bug in reporting http errors that don't have an http error code.
1490
* Handle more cases of pipe errors in display commands
1492
* Change status to 3 for all errors
1494
* Files that are added and unlinked before committing are completely
1495
ignored by diff and status
1497
* Stores with some compressed texts and some uncompressed texts are now
1498
able to be used. (John A Meinel)
1500
* Fix for bzr pull failing sometimes under windows
1502
* Fix for sftp transport under windows when using interactive auth
1504
* Show files which are both renamed and modified as such in 'bzr
1505
status' output. (#4503, Daniel Silverstone)
1507
* Make annotate cope better with revisions committed without a valid
1508
email address. (Marien Zwart)
1510
* Fix representation of tab characters in commit messages. (Harald
1513
* List of plugin directories in BZR_PLUGIN_PATH environment variable is
1514
now parsed properly under Windows. (Alexander Belchenko)
1516
* Show number of revisions pushed/pulled/merged. (Robey Pointer)
1518
* Keep a cached copy of the basis inventory to speed up operations
1519
that need to refer to it. (Johan Rydberg, Martin Pool)
1521
* Fix bugs in bzr status display of non-ascii characters. (Martin
1524
* Remove Makefile.in from default ignore list. (#6413, Tollef Fog
1527
* Fix failure in 'bzr added'. (Nathan McCallum, Martin Pool)
1531
* Fix selftest asking for passwords when there are no SFTP keys.
1532
(Robey Pointer, Jelmer Vernooij)
1534
* Fix selftest run with 'python -O'. (Martin Pool)
1536
* Fix HTTP tests under Windows. (John Arbash Meinel)
1538
* Make tests work even if HOME is not set (Aaron Bentley)
1540
* Updated build_tree to use fixed line-endings for tests which read
1541
the file cotents and compare. Make some tests use this to pass under
1542
Windows. (John Arbash Meinel)
1544
* Skip stat and symlink tests under Windows. (Alexander Belchenko)
1546
* Delay in selftest/testhashcash is now issued under win32 and Cygwin.
1547
(John Arbash Meinel)
1549
* Use terminal width to align verbose test output. (Martin Pool)
1551
* Blackbox tests are maintained within the bzrlib.tests.blackbox directory.
1552
If adding a new test script please add that to
1553
bzrlib.tests.blackbox.__init__. (Robert Collins)
1555
* Much better error message if one of the test suites can't be
1556
imported. (Martin Pool)
1558
* Make check now runs the test suite twice - once with the default locale,
1559
and once with all locales forced to C, to expose bugs. This is not
1560
trivially done within python, so for now its only triggered by running
1561
Make check. Integrators and packagers who wish to check for full
1562
platform support should run 'make check' to test the source.
1565
* Tests can now run TestSkipped if they can't execute for any reason.
1566
(Martin Pool) (NB: TestSkipped should only be raised for correctable
1567
reasons - see the wiki spec ImprovingBzrTestSuite).
1569
* Test sftp with relative, absolute-in-homedir and absolute-not-in-homedir
1570
paths for the transport tests. Introduce blackbox remote sftp tests that
1571
test the same permutations. (Robert Collins, Robey Pointer)
1573
* Transport implementation tests are now independent of the local file
1574
system, which allows tests for esoteric transports, and for features
1575
not available in the local file system. They also repeat for variations
1576
on the URL scheme that can introduce issues in the transport code,
1577
see bzrlib.transport.TransportTestProviderAdapter() for this.
1580
* TestCase.build_tree uses the transport interface to build trees, pass
1581
in a transport parameter to give it an existing connection.
1586
* WorkingTree.pull has been split across Branch and WorkingTree,
1587
to allow Branch only pulls. (Robert Collins)
1589
* commands.display_command now returns the result of the decorated
1590
function. (Robert Collins)
1592
* LocationConfig now has a set_user_option(key, value) call to save
1593
a setting in its matching location section (a new one is created
1594
if needed). (Robert Collins)
1596
* Branch has two new methods, get_push_location and set_push_location
1597
to respectively, get and set the push location. (Robert Collins)
1599
* commands.register_command now takes an optional flag to signal that
1600
the registrant is planning to decorate an existing command. When
1601
given multiple plugins registering a command is not an error, and
1602
the original command class (whether built in or a plugin based one) is
1603
returned to the caller. There is a new error 'MustUseDecorated' for
1604
signalling when a wrapping command should switch to the original
1605
version. (Robert Collins)
1607
* Some option parsing errors will raise 'BzrOptionError', allowing
1608
granular detection for decorating commands. (Robert Collins).
1610
* Branch.read_working_inventory has moved to
1611
WorkingTree.read_working_inventory. This necessitated changes to
1612
Branch.get_root_id, and a move of Branch.set_inventory to WorkingTree
1613
as well. To make it clear that a WorkingTree cannot always be obtained
1614
Branch.working_tree() will raise 'errors.NoWorkingTree' if one cannot
1615
be obtained. (Robert Collins)
1617
* All pending merges operations from Branch are now on WorkingTree.
1620
* The follow operations from Branch have moved to WorkingTree:
1628
* bzrlib.add.smart_add_branch is now smart_add_tree. (Robert Collins)
1630
* New "rio" serialization format, similar to rfc-822. (Martin Pool)
1632
* Rename selftests to `bzrlib.tests.test_foo`. (John A Meinel, Martin
1635
* bzrlib.plugin.all_plugins has been changed from an attribute to a
1636
query method. (Robert Collins)
1638
* New options to read only the table-of-contents of a weave.
1641
* Raise NoSuchFile when someone tries to add a non-existant file.
1644
* Simplify handling of DivergedBranches in cmd_pull().
1648
* Branch.controlfile* logic has moved to lockablefiles.LockableFiles, which
1649
is exposed as Branch().control_files. Also this has been altered with the
1650
controlfile pre/suffix replaced by simple method names like 'get' and
1651
'put'. (Aaron Bentley, Robert Collins).
1653
* Deprecated functions and methods can now be marked as such using the
1654
bzrlib.symbol_versioning module. Marked method have their docstring
1655
updated and will issue a DeprecationWarning using the warnings module
1656
when they are used. (Robert Collins)
1658
* bzrlib.osutils.safe_unicode now exists to provide parameter coercion
1659
for functions that need unicode strings. (Robert Collins)
1665
* pull now takes --verbose to show you what revisions are added or removed
1668
* merge now takes a --show-base option to include the base text in
1672
* The config files are now read using ConfigObj, so '=' should be used as
1673
a separator, not ':'.
1676
* New 'bzr commit --strict' option refuses to commit if there are
1677
any unknown files in the tree. To commit, make sure all files are
1678
either ignored, added, or deleted. (Michael Ellerman)
1680
* The config directory is now ~/.bazaar, and there is a single file
1681
~/.bazaar/bazaar.conf storing email, editor and other preferences.
1684
* 'bzr add' no longer takes a --verbose option, and a --quiet option
1685
has been added that suppresses all output.
1687
* Improved zsh completion support in contrib/zsh, from Clint
1690
* Builtin 'bzr annotate' command, by Martin Pool with improvements from
1691
Goffredo Baroncelli.
1693
* 'bzr check' now accepts -v for verbose reporting, and checks for
1694
ghosts in the branch. (Robert Collins)
1696
* New command 're-sign' which will regenerate the gpg signature for
1697
a revision. (Robert Collins)
1699
* If you set check_signatures=require for a path in
1700
~/.bazaar/branches.conf then bzr will invoke your
1701
gpg_signing_command (defaults to gpg) and record a digital signature
1702
of your commit. (Robert Collins)
1704
* New sftp transport, based on Paramiko. (Robey Pointer)
1706
* 'bzr pull' now accepts '--clobber' which will discard local changes
1707
and make this branch identical to the source branch. (Robert Collins)
1709
* Just give a quieter warning if a plugin can't be loaded, and
1710
put the details in .bzr.log. (Martin Pool)
1712
* 'bzr branch' will now set the branch-name to the last component of the
1713
output directory, if one was supplied.
1715
* If the option 'post_commit' is set to one (or more) python function
1716
names (must be in the bzrlib namespace), then they will be invoked
1717
after the commit has completed, with the branch and revision_id as
1718
parameters. (Robert Collins)
1720
* Merge now has a retcode of 1 when conflicts occur. (Robert Collins)
1722
* --merge-type weave is now supported for file contents. Tree-shape
1723
changes are still three-way based. (Martin Pool, Aaron Bentley)
1725
* 'bzr check' allows the first revision on revision-history to have
1726
parents - something that is expected for cheap checkouts, and occurs
1727
when conversions from baz do not have all history. (Robert Collins).
1729
* 'bzr merge' can now graft unrelated trees together, if your specify
1730
0 as a base. (Aaron Bentley)
1732
* 'bzr commit branch' and 'bzr commit branch/file1 branch/file2' now work
1735
* Add '.sconsign*' to default ignore list. (Alexander Belchenko)
1737
* 'bzr merge --reprocess' minimizes conflicts
1741
* The 'bzr selftest --pattern' option for has been removed, now
1742
test specifiers on the command line can be simple strings, or
1743
regexps, or both. (Robert Collins)
1745
* Passing -v to selftest will now show the time each test took to
1746
complete, which will aid in analysing performance regressions and
1747
related questions. (Robert Collins)
1749
* 'bzr selftest' runs all tests, even if one fails, unless '--one'
1750
is given. (Martin Pool)
1752
* There is a new method for TestCaseInTempDir, assertFileEqual, which
1753
will check that a given content is equal to the content of the named
1754
file. (Robert Collins)
1756
* Fix test suite's habit of leaving many temporary log files in $TMPDIR.
1761
* New 'testament' command and concept for making gpg-signatures
1762
of revisions that are not tied to a particular internal
1763
representation. (Martin Pool).
1765
* Per-revision properties ('revprops') as key-value associated
1766
strings on each revision created when the revision is committed.
1767
Intended mainly for the use of external tools. (Martin Pool).
1769
* Config options have moved from bzrlib.osutils to bzrlib.config.
1772
* Improved command line option definitions allowing explanations
1773
for individual options, among other things. Contributed by
1776
* Config options have moved from bzrlib.osutils to bzrlib.config.
1777
Configuration is now done via the config.Config interface:
1778
Depending on whether you have a Branch, a Location or no information
1779
available, construct a ``*Config``, and use its ``signature_checking``,
1780
``username`` and ``user_email`` methods. (Robert Collins)
1782
* Plugins are now loaded under bzrlib.plugins, not bzrlib.plugin, and
1783
they are made available for other plugins to use. You should not
1784
import other plugins during the __init__ of your plugin though, as
1785
no ordering is guaranteed, and the plugins directory is not on the
1786
python path. (Robert Collins)
1788
* Branch.relpath has been moved to WorkingTree.relpath. WorkingTree no
1789
no longer takes an inventory, rather it takes an option branch
1790
parameter, and if None is given will open the branch at basedir
1791
implicitly. (Robert Collins)
1793
* Cleaner exception structure and error reporting. Suggested by
1794
Scott James Remnant. (Martin Pool)
1796
* Branch.remove has been moved to WorkingTree, which has also gained
1797
lock_read, lock_write and unlock methods for convenience. (Robert
1800
* Two decorators, needs_read_lock and needs_write_lock have been added
1801
to the branch module. Use these to cause a function to run in a
1802
read or write lock respectively. (Robert Collins)
1804
* Branch.open_containing now returns a tuple (Branch, relative-path),
1805
which allows direct access to the common case of 'get me this file
1806
from its branch'. (Robert Collins)
1808
* Transports can register using register_lazy_transport, and they
1809
will be loaded when first used. (Martin Pool)
1811
* 'pull' has been factored out of the command as WorkingTree.pull().
1812
A new option to WorkingTree.pull has been added, clobber, which will
1813
ignore diverged history and pull anyway.
1816
* config.Config has a 'get_user_option' call that accepts an option name.
1817
This will be looked up in branches.conf and bazaar.conf as normal.
1818
It is intended that this be used by plugins to support options -
1819
options of built in programs should have specific methods on the config.
1822
* merge.merge_inner now has tempdir as an optional parameter. (Robert
1825
* Tree.kind is not recorded at the top level of the hierarchy, as it was
1826
missing on EmptyTree, leading to a bug with merge on EmptyTrees.
1829
* WorkingTree.__del__ has been removed, it was non deterministic and not
1830
doing what it was intended to. See WorkingTree.__init__ for a comment
1831
about future directions. (Robert Collins/Martin Pool)
1833
* bzrlib.transport.http has been modified so that only 404 urllib errors
1834
are returned as NoSuchFile. Other exceptions will propogate as normal.
1835
This allows debuging of actual errors. (Robert Collins)
1837
* bzrlib.transport.Transport now accepts *ONLY* url escaped relative paths
1838
to apis like 'put', 'get' and 'has'. This is to provide consistent
1839
behaviour - it operates on url's only. (Robert Collins)
1841
* Transports can register using register_lazy_transport, and they
1842
will be loaded when first used. (Martin Pool)
1844
* 'merge_flex' no longer calls conflict_handler.finalize(), instead that
1845
is called by merge_inner. This is so that the conflict count can be
1846
retrieved (and potentially manipulated) before returning to the caller
1847
of merge_inner. Likewise 'merge' now returns the conflict count to the
1848
caller. (Robert Collins)
1850
* 'revision.revision_graph can handle having only partial history for
1851
a revision - that is no revisions in the graph with no parents.
1854
* New builtins.branch_files uses the standard file_list rules to produce
1855
a branch and a list of paths, relative to that branch (Aaron Bentley)
1857
* New TestCase.addCleanup facility.
1859
* New bzrlib.version_info tuple (similar to sys.version_info), which can
1860
be used by programs importing bzrlib.
1864
* Better handling of branches in directories with non-ascii names.
1865
(Joel Rosdahl, Panagiotis Papadakos)
1867
* Upgrades of trees with no commits will not fail due to accessing
1868
[-1] in the revision-history. (Andres Salomon)
1871
bzr 0.1.1 2005-10-12
1875
* Fix problem in pulling over http from machines that do not
1876
allow directories to be listed.
1878
* Avoid harmless warning about invalid hash cache after
1879
upgrading branch format.
1883
* Avoid some unnecessary http operations in branch and pull.
1890
* 'bzr branch' over http initially gives a very high estimate
1891
of completion time but it should fall as the first few
1892
revisions are pulled in. branch is still slow on
1893
high-latency connections.
1897
* bzr-man.py has been updated to work again. Contributed by
1900
* Locking is now done with fcntl.lockf which works with NFS
1901
file systems. Contributed by Harald Meland.
1903
* When a merge encounters a file that has been deleted on
1904
one side and modified on the other, the old contents are
1905
written out to foo.BASE and foo.SIDE, where SIDE is this
1906
or OTHER. Contributed by Aaron Bentley.
1908
* Export was choosing incorrect file paths for the content of
1909
the tarball, this has been fixed by Aaron Bentley.
1911
* Commit will no longer commit without a log message, an
1912
error is returned instead. Contributed by Jelmer Vernooij.
1914
* If you commit a specific file in a sub directory, any of its
1915
parent directories that are added but not listed will be
1916
automatically included. Suggested by Michael Ellerman.
1918
* bzr commit and upgrade did not correctly record new revisions
1919
for files with only a change to their executable status.
1920
bzr will correct this when it encounters it. Fixed by
1923
* HTTP tests now force off the use of http_proxy for the duration.
1924
Contributed by Gustavo Niemeyer.
1926
* Fix problems in merging weave-based branches that have
1927
different partial views of history.
1929
* Symlink support: working with symlinks when not in the root of a
1930
bzr tree was broken, patch from Scott James Remnant.
1934
* 'branch' now accepts a --basis parameter which will take advantage
1935
of local history when making a new branch. This allows faster
1936
branching of remote branches. Contributed by Aaron Bentley.
1938
* New tree format based on weave files, called version 5.
1939
Existing branches can be upgraded to this format using
1942
* Symlinks are now versionable. Initial patch by
1943
Erik Toubro Nielsen, updated to head by Robert Collins.
1945
* Executable bits are tracked on files. Patch from Gustavo
1948
* 'bzr status' now shows unknown files inside a selected directory.
1949
Patch from Heikki Paajanen.
1951
* Merge conflicts are recorded in .bzr. Two new commands 'conflicts'
1952
and 'resolve' have needed added, which list and remove those
1953
merge conflicts respectively. A conflicted tree cannot be committed
1954
in. Contributed by Aaron Bentley.
1956
* 'rm' is now an alias for 'remove'.
1958
* Stores now split out their content in a single byte prefixed hash,
1959
dropping the density of files per directory by 256. Contributed by
1962
* 'bzr diff -r branch:URL' will now perform a diff between two branches.
1963
Contributed by Robert Collins.
1965
* 'bzr log' with the default formatter will show merged revisions,
1966
indented to the right. Initial implementation contributed by Gustavo
1967
Niemeyer, made incremental by Robert Collins.
1972
* Test case failures have the exception printed after the log
1973
for your viewing pleasure.
1975
* InventoryEntry is now an abstract base class, use one of the
1976
concrete InventoryDirectory etc classes instead.
1978
* Branch raises an UnsupportedFormatError when it detects a
1979
bzr branch it cannot understand. This allows for precise
1980
handling of such circumstances.
1985
* Removed testsweet module so that tests can be run after
1986
bzr installed by 'bzr selftest'.
1988
* 'bzr selftest' command-line arguments can now be partial ids
1989
of tests to run, e.g. 'bzr selftest test_weave'
1992
bzr 0.0.9 2005-09-23
1996
* Fixed "branch -r" option.
1998
* Fix remote access to branches containing non-compressed history.
2001
* Better reliability of http server tests. (John Arbash-Meinel)
2003
* Merge graph maximum distance calculation fix. (Aaron Bentley)
2005
* Various minor bug in windows support have been fixed, largely in the
2006
test suite. Contributed by Alexander Belchenko.
2010
* Status now accepts a -r argument to give status between chosen
2011
revisions. Contributed by Heikki Paajanen.
2013
* Revision arguments no longer use +/-/= to control ranges, instead
2014
there is a 'before' namespace, which limits the successive namespace.
2015
For example '$ bzr log -r date:yesterday..before:date:today' will
2016
select everything from yesterday and before today. Contributed by
2019
* There is now a bzr.bat file created by distutils when building on
2020
Windows. Contributed by Alexander Belchenko.
2024
* Removed uuid() as it was unused.
2026
* Improved 'fetch' code for pulling revisions from one branch into
2027
another (used by pull, merged, etc.)
2030
bzr 0.0.8 2005-09-20
2034
* Adding a file whose parent directory is not versioned will
2035
implicitly add the parent, and so on up to the root. This means
2036
you should never need to explictly add a directory, they'll just
2037
get added when you add a file in the directory. Contributed by
2040
* Ignore .DS_Store (contains Mac metadata) by default. Patch from
2043
* If you set BZR_EDITOR in the environment, it is checked in
2044
preference to EDITOR and the config file for the interactive commit
2045
editing program. Related to this is a bugfix where a missing program
2046
set in EDITOR would cause editing to fail, now the fallback program
2047
for the operating system is still tried.
2049
* Files that are not directories/symlinks/regular files will no longer
2050
cause bzr to fail, it will just ignore them by default. You cannot add
2051
them to the tree though - they are not versionable.
2056
* Refactor xml packing/unpacking.
2060
* Fixed 'bzr mv' by Ollie Rutherfurd.
2062
* Fixed strange error when trying to access a nonexistent http
2065
* Make sure that the hashcache gets written out if it can't be
2071
* Various Windows fixes from Ollie Rutherfurd.
2073
* Quieten warnings about locking; patch from Matt Lavin.
2076
bzr-0.0.7 2005-09-02
2080
* ``bzr shell-complete`` command contributed by Clint Adams to
2081
help with intelligent shell completion.
2083
* New expert command ``bzr find-merge-base`` for debugging merges.
2088
* Much better merge support.
2090
* merge3 conflicts are now reported with markers like '<<<<<<<'
2091
(seven characters) which is the same as CVS and pleases things
2097
* ``bzr upgrade`` no longer fails when trying to fix trees that
2098
mention revisions that are not present.
2100
* Fixed bugs in listing plugins from ``bzr plugins``.
2102
* Fix case of $EDITOR containing options for the editor.
2104
* Fix log -r refusing to show the last revision.
2105
(Patch from Goffredo Baroncelli.)
2110
* ``bzr log --show-ids`` shows the revision ids of all parents.
2112
* Externally provided commands on your $BZRPATH no longer need
2113
to recognize --bzr-usage to work properly, and can just handle
2119
* Changed trace messages to go through the standard logging
2120
framework, so that they can more easily be redirected by
2125
bzr-0.0.6 2005-08-18
2129
* Python plugins, automatically loaded from the directories on
2130
BZR_PLUGIN_PATH or ~/.bzr.conf/plugins by default.
2132
* New 'bzr mkdir' command.
2134
* Commit mesage is fetched from an editor if not given on the
2135
command line; patch from Torsten Marek.
2137
* ``bzr log -m FOO`` displays commits whose message matches regexp
2140
* ``bzr add`` with no arguments adds everything under the current directory.
2142
* ``bzr mv`` does move or rename depending on its arguments, like
2145
* ``bzr missing`` command shows a summary of the differences
2146
between two trees. (Merged from John Arbash-Meinel.)
2148
* An email address for commits to a particular tree can be
2149
specified by putting it into .bzr/email within a branch. (Based
2150
on a patch from Heikki Paajanen.)
2155
* Faster working tree operations.
2160
* 3rd-party modules shipped with bzr are copied within the bzrlib
2161
python package, so that they can be installed by the setup
2162
script without clashing with anything already existing on the
2163
system. (Contributed by Gustavo Niemeyer.)
2165
* Moved plugins directory to bzrlib/, so that there's a standard
2166
plugin directory which is not only installed with bzr itself but
2167
is also available when using bzr from the development tree.
2168
BZR_PLUGIN_PATH and DEFAULT_PLUGIN_PATH are then added to the
2169
standard plugins directory.
2171
* When exporting to a tarball with ``bzr export --format tgz``, put
2172
everything under a top directory rather than dumping it into the
2173
current directory. This can be overridden with the ``--root``
2174
option. Patch from William Dodé and John Meinel.
2176
* New ``bzr upgrade`` command to upgrade the format of a branch,
2177
replacing ``bzr check --update``.
2179
* Files within store directories are no longer marked readonly on
2182
* Changed ``bzr log`` output to a more compact form suggested by
2183
John A Meinel. Old format is available with the ``--long`` or
2184
``-l`` option, patched by William Dodé.
2186
* By default the commit command refuses to record a revision with
2187
no changes unless the ``--unchanged`` option is given.
2189
* The ``--no-plugins``, ``--profile`` and ``--builtin`` command
2190
line options must come before the command name because they
2191
affect what commands are available; all other options must come
2192
after the command name because their interpretation depends on
2195
* ``branch`` and ``clone`` added as aliases for ``branch``.
2197
* Default log format is back to the long format; the compact one
2198
is available with ``--short``.
2203
* Fix bugs in committing only selected files or within a subdirectory.
2206
bzr-0.0.5 2005-06-15
2210
* ``bzr`` with no command now shows help rather than giving an
2211
error. Suggested by Michael Ellerman.
2213
* ``bzr status`` output format changed, because svn-style output
2214
doesn't really match the model of bzr. Now files are grouped by
2215
status and can be shown with their IDs. ``bzr status --all``
2216
shows all versioned files and unknown files but not ignored files.
2218
* ``bzr log`` runs from most-recent to least-recent, the reverse
2219
of the previous order. The previous behaviour can be obtained
2220
with the ``--forward`` option.
2222
* ``bzr inventory`` by default shows only filenames, and also ids
2223
if ``--show-ids`` is given, in which case the id is the second
2229
* New 'bzr whoami --email' option shows only the email component
2230
of the user identification, from Jo Vermeulen.
2232
* New ``bzr ignore PATTERN`` command.
2234
* Nicer error message for broken pipe, interrupt and similar
2235
conditions that don't indicate an internal error.
2237
* Add ``.*.sw[nop] .git .*.tmp *,v`` to default ignore patterns.
2239
* Per-branch locks keyed on ``.bzr/branch-lock``, available in
2240
either read or write mode.
2242
* New option ``bzr log --show-ids`` shows revision and file ids.
2244
* New usage ``bzr log FILENAME`` shows only revisions that
2247
* Changed format for describing changes in ``bzr log -v``.
2249
* New option ``bzr commit --file`` to take a message from a file,
2250
suggested by LarstiQ.
2252
* New syntax ``bzr status [FILE...]`` contributed by Bartosz
2253
Oler. File may be in a branch other than the working directory.
2255
* ``bzr log`` and ``bzr root`` can be given an http URL instead of
2258
* Commands can now be defined by external programs or scripts
2259
in a directory on $BZRPATH.
2261
* New "stat cache" avoids reading the contents of files if they
2262
haven't changed since the previous time.
2264
* If the Python interpreter is too old, try to find a better one
2265
or give an error. Based on a patch from Fredrik Lundh.
2267
* New optional parameter ``bzr info [BRANCH]``.
2269
* New form ``bzr commit SELECTED`` to commit only selected files.
2271
* New form ``bzr log -r FROM:TO`` shows changes in selected
2272
range; contributed by John A Meinel.
2274
* New option ``bzr diff --diff-options 'OPTS'`` allows passing
2275
options through to an external GNU diff.
2277
* New option ``bzr add --no-recurse`` to add a directory but not
2280
* ``bzr --version`` now shows more information if bzr is being run
2286
* Fixed diff format so that added and removed files will be
2287
handled properly by patch. Fix from Lalo Martins.
2289
* Various fixes for files whose names contain spaces or other
2295
* Converted black-box test suites from Bourne shell into Python;
2296
now run using ``./testbzr``. Various structural improvements to
2299
* testbzr by default runs the version of bzr found in the same
2300
directory as the tests, or the one given as the first parameter.
2302
* testbzr also runs the internal tests, so the only command
2303
required to check is just ``./testbzr``.
2305
* testbzr requires python2.4, but can be used to test bzr running
2306
under a different version.
2308
* Tests added for many other changes in this release.
2313
* Included ElementTree library upgraded to 1.2.6 by Fredrik Lundh.
2315
* Refactor command functions into Command objects based on HCT by
2316
Scott James Remnant.
2318
* Better help messages for many commands.
2320
* Expose bzrlib.open_tracefile() to start the tracefile; until
2321
this is called trace messages are just discarded.
2323
* New internal function find_touching_revisions() and hidden
2324
command touching-revisions trace the changes to a given file.
2326
* Simpler and faster compare_inventories() function.
2328
* bzrlib.open_tracefile() takes a tracefilename parameter.
2330
* New AtomicFile class.
2332
* New developer commands ``added``, ``modified``.
2337
* Cope on Windows on python2.3 by using the weaker random seed.
2338
2.4 is now only recommended.
2341
bzr-0.0.4 2005-04-22
2345
* 'bzr diff' optionally takes a list of files to diff. Still a bit
2346
basic. Patch from QuantumG.
2348
* More default ignore patterns.
2350
* New 'bzr log --verbose' shows a list of files changed in the
2351
changeset. Patch from Sebastian Cote.
2353
* Roll over ~/.bzr.log if it gets too large.
2355
* Command abbreviations 'ci', 'st', 'stat', '?' based on a patch
2358
* New 'bzr help commands' based on a patch from Denys Duchier.
2363
* User email is determined by looking at $BZREMAIL or ~/.bzr.email
2364
or $EMAIL. All are decoded by the locale preferred encoding.
2365
If none of these are present user@hostname is used. The host's
2366
fully-qualified name is not used because that tends to fail when
2367
there are DNS problems.
2369
* New 'bzr whoami' command instead of username user-email.
2374
* Make commit safe for hardlinked bzr trees.
2376
* Some Unicode/locale fixes.
2378
* Partial workaround for difflib.unified_diff not handling
2379
trailing newlines properly.
2384
* Allow docstrings for help to be in PEP0257 format. Patch from
2387
* More tests in test.sh.
2389
* Write profile data to a temporary file not into working
2390
directory and delete it when done.
2392
* Smaller .bzr.log with process ids.
2397
* Fix opening of ~/.bzr.log on Windows. Patch from Andrew
2400
* Some improvements in handling paths on Windows, based on a patch
2404
bzr-0.0.3 2005-04-06
2408
* New "directories" internal command lists versioned directories
2411
* Can now say "bzr commit --help".
2413
* New "rename" command to rename one file to a different name
2416
* New "move" command to move one or more files into a different
2419
* New "renames" command lists files renamed since base revision.
2421
* New cat command contributed by janmar.
2425
* .bzr.log is placed in $HOME (not pwd) and is always written in
2426
UTF-8. (Probably not a completely good long-term solution, but
2431
* Workaround for difflib bug in Python 2.3 that causes an
2432
exception when comparing empty files. Reported by Erik Toubro
2437
* Refactored inventory storage to insert a root entry at the top.
2441
* Start of shell-based black-box testing in test.sh.
2448
* Win32 fixes from Steve Brown.
2451
bzr-0.0.2 "black cube" 2005-03-31
2455
* Default ignore list extended (see bzrlib/__init__.py).
2457
* Patterns in .bzrignore are now added to the default ignore list,
2458
rather than replacing it.
2460
* Ignore list isn't reread for every file.
2464
* Reinstate the 'bzr check' command to check invariants of the
2467
* New 'ignored' command lists which files are ignored and why;
2468
'deleted' lists files deleted in the current working tree.
2470
* Performance improvements.
2472
* New global --profile option.
2474
* Ignore patterns like './config.h' now correctly match files in
2475
the root directory only.
2478
bzr-0.0.1 2005-03-26
2482
* More information from info command.
2484
* Can now say "bzr help COMMAND" for more detailed help.
2486
* Less file flushing and faster performance when writing logs and
2487
committing to stores.
2489
* More useful verbose output from some commands.
2493
* Fix inverted display of 'R' and 'M' during 'commit -v'.
2497
* Include a subset of ElementTree-1.2.20040618 to make
2498
installation easier.
2500
* Fix time.localtime call to work with Python 2.3 (the minimum
2504
bzr-0.0.0.69 2005-03-22
2508
* First public release.
2510
* Storage of local versions: init, add, remove, rm, info, log,
added
removed
NEWS
